Air & Electronic Gauges Archives

Specifications:

Column	Pneumatic
Type	Standard/Fanuc (Column transmit data (reading) to Fanuc controller O-i / Power Mate / 16 / 18 Series)
Input Channels	1
Air Cut-Off	Without Air Cut-Off / With Air Cut –Off Available (Air gets ON when Plug is placed in the Job else Air will remain OFF).
Resolution	0.1μm/ 0.5μm/ 1μm/ 5μm
Units	mm / Inch
Display	6 digit 7 segments
Setup	10
Measurement Modes	Cur, Max, Min, Diff
Modes	ID/OD
Indications	Reject, OK, Rework
Calibration	Single/Double calibration
Scaling	Auto / Manual
Communication port	RS-232, Wireless modules-optional
RS-232 Port	1/2 (In case of 2 port customer should specify both port requirement)
Data Transmission	Auto/Manual
Footswitch	Available
Output	3 open collector outputs provided on DB15
Pressure Sensor	Connector Available for connecting Pressure Sensor.

Specifications:

Input Channels	2
Resolution	0.1, 0.5, 1, 5 µm
Units	mm / Inch
Display	6 digit 7 segment
Measurement Modes	Curr , Max , Min , Diff
Functions	A, B , A+B, A-B
Indications	Reject, OK , Rework
Calibration	Single/Double calibration
Scaling	Auto / Manual
Communication port	RS-232. Wireless modules-optional
Footswitch	Available
Output	1 CO relay contact
Measuring Ranges	0.1um -9.9999 to 99.9999 1um -99.999 to 999.999
Bar Ranges	0.1um-10um 0.5um- 50um 1um – 100um 5um – 500um

Specifications:

Input Channels	1
Resolution	0.1, 0.5, 1, 5 µm
Units	mm / Inch
Display	6 digit 7 segment
Measurement Modes	Curr , Max , Min , Diff
Functions	A
Indications	Reject, OK , Rework
Calibration	Single/Double
Scaling	Auto / Manual
Communication port	RS-232. Wireless modules-optional
Footswitch	Available
Output	1 CO relay contact
Measuring Ranges	0.1um -9.9999 to 99.9999 1um -99.999 to 999.999
Bar Ranges	0.1um-10um 0.5um- 50um 1um – 100um 5um – 500um

Specifications:

Input Channels	2
Resolution	5µm/ 1µm/ 0.5µm/ 0.1µm
Units	mm , inch
Measurement Modes	Current, Min, Max, Differential
Functions	A, B, A+B, A-B
Indications	Reject, Ok, Rework
Calibration	Single/Double
Display	Tricolour 2 Line 7 Digit seven segment display
Communication port	RS-232
Outputs	6 open collector outputs
Footswitch interface	Available

Specifications:

Input Channels	1
Resolution	5µm/ 1µm/ 0.5µm/ 0.1µm
Units	mm , inch
Measurement Modes	Current, Min, Max, Differential
Functions	A PUSH/PULL
Indications	Reject, Ok, Rework
Calibration	Single/Double
Display	Tricolour 1 Line 7 Digit seven segment display
Communication port	RS-232
Outputs	3 open collector outputs
Footswitch interface	Available

Microprocessor based Twin Channel: 2043 Digital

8 character, LED type, 7 segment digital display shows measurements either in absolute or comparative form
Exclusive 8-character alphanumeric dot-matrix type digital display for menu setting
Two metric & two inch measuring ranges

FEATURES OF MICROPROCESSOR BASED TWIN CHANNEL

State-of-the-art technology with host of features, a must for today’s shop process quality engineering
Two level password, prevents unauthorized alteration
Multiple-level display intensity for operators comfort
Inch & metric measuring ranges
Static & dynamic measurement
Permits incorporation of complex formulae for probe combination
Display of tolerance and control limit status – supports process control
Classifies tolerance band into uniform or non-uniform tailor made grades
Permits menu entries up to 16 different settings for quick application changeover
Wide range of process control based electrical outputs facilitates automation
Auto calibration
Compatible with half bridge and LVDT type inductive measuring probe
RS232 based interface with real time tagged measurements
Aesthetically appealing, sturdy and ergonomic design, suitable for shop-floor applications
USB interface to PC and flash drive

microprocessor-based-twin-channel-2043-digital_01

microprocessor-based-twin-channel-2043-digital_02

microprocessor-based-twin-channel-2043-digital_03

	2043
Metric Ranges	±200 & ±2000 µm
Resolution	0.1 & 1 µm
INCH Ranges	±0.020 & ±0.200 inch
Resolution	0.00001 & 0.0001 inch

Check the PDF

Electronic Probe: 2900

Specifications	2900
Measuring travel	± 0.4 mm
Total travel	1 mm
Linearity	± 0.5% (of total measuring range)
Repeatability	0.15 μm
Measuring force	0.8 N
Pre-travel	Fixed
Application	Universal
Environmental Protection (IEC 529)	IP 64
Plunger guide	Preloaded, caged linear ball bearing
Cable	2 m., Polyurethane.
Cable support spring	N.A.
Connecting adaptor	5–pin, Male DIN plug (240°)
Total length (with support spring)	50
Probe body	Hardened and ground stainless steel (55HRC); Diameter 5h6
Reference temperature	20°C
Contact tip	Tungsten carbide ball 4 mm Dia, M2 Thread.
Sealing bellow	Viton

Electronic Probe: 2952

Specifications	2952 Lever Type
Measuring Travel	± 1 mm
Total Travel	2 mm
Linearity	± 0.3%
Repeatability	0.5 µm
Measuring force	0.25 N
Pre-travel	Fixed
Application	Low Measuring Force
Environmental Protection (IEC 529)	IP50
Plunger guide	Parallel Leaf spring
Cable	PVC
Cable support spring	NA
Connection adaptor	5-pin, Male DIN plug (240 °)
Total Length (with support spring)	–
Probe Body	–
Reference temperature	20 °C
Contact Tip	9 mm long stylus having M1.6 threads & Ø 2 mm tungsten carbige ball tip
Sealing bellow	–

Electronic Probe: 2910/2920/2940

Specifications	2910/2910R	2920 / 2920R	2940 / 2940R
Measuring Travel	± 1 mm	± 1 mm	± 2 mm
Total Travel	2.25 mm	3 mm	4.5 mm
Linearity	± 0.3% (of total measuring range)	± 0.3% (of total measuring range)	± 0.3%
Repeatability	0.02 μm	0.02 µm	0.02 µm
Measuring force	0.6 N	0.6 N	0.6 N
Pre-travel	Variable	Variable	Variable
Application	Universal	Universal	Universal
Environmental Protection (IEC 529)	IP 64	IP 64	IP 64
Plunger guide	Preloaded, caged linear ball bearing	Pre-loaded, caged linear ball bearing	Pre-loaded, caged linear ball bearing
Cable	2 m., Polyurethane.	2 m (Axial) Polyurethane	2 m (Axial) Polyurethane
Cable support spring	Present	Present	Present
Connection adaptor	5–pin, Male DIN plug (240°)	5-pin, Male DIN plug (240 °)	5-pin, Male DIN plug (240 °)
Total Length (with support spring)	87 mm	112 mm	112 mm
Probe Body	Hardened and ground stainless steel (55HRC); Diameter 8h6	Hardened & ground stainless steel (55HRC) (Diameter 8h6)	Hardened & ground stainless steel (55HRC) (Diameter 8h6)
Reference temperature	20°C	20 °C	20 °C
Contact Tip	Tungsten carbide ball 3 mm Dia, M2.5 Thread.	Tungsten Carbide Ball 3 mm Dia, M2.5 Thread	Tungsten Carbide Ball 3 mm Dia, M2.5 Thread
Sealing bellow	Viton with the metal clips	Viton with the metal clips	Viton with the metal clips

Electronic Probe: 2940V/2920V

&bsp;

Specifications	2920V / 2940V (Vacuum Lift)
Measuring Travel	± 2 mm (± 1 mm for 2920V)
Total Travel	4.5 mm (3 mm for 2920V)
Linearity	± 0.3%
Repeatability	0.02 µm
Measuring force	0.45 to 0.75 N
Pre-travel	Variable
Application	Vacuum Lift
Environmental Protection (IEC 529)	IP 66
Plunger guide	Pre-loaded, caged linear ball bearing
Cable	2 m (Axial) Polyurethane
Cable support spring	Present
Connection adaptor	5-pin, Male DIN plug (240 °)
Total Length (with support spring)	114 mm
Probe Body	Hardened & ground stainless steel (55HRC) (Diameter 8h6)
Reference temperature	20 °C
Contact Tip	Tungsten Carbide Ball 3 mm Dia, M2.5 Thread(240 °) with screw
Sealing bellow	Viton

Electronic Probe: 2950

Specifications	2950
Measuring travel	± 5 mm
Total travel	2.25 mm
Linearity	± 1.5 % (of total measuring range)
Repeatability	0.15 μm
Measuring force	2.5 N
Pre-travel	Variable
Application	Universal
Environmental Protection (IEC 529)	IP 64
Plunger guide	Preloaded, caged linear ball bearing
Cable	2 m., Polyurethane.
Cable support spring	Present
Connecting adaptor	5–pin, Male DIN plug (240°)
Total length (with support spring)	145
Probe body	Hardened and ground stainless steel (55HRC); Diameter 8h6
Reference temperature	20°C
Contact tip	Tungsten carbide ball 3 mm Dia, M2.5 Thread.
Sealing bellow	Viton

Check the PDF

Microprocessor based Twin Channel: 2041 Analogue

Digitally driven, Analogue Galvanometer type measurement display
Five metric and five inch measuring ranges

FEATURES OF TWIN CHANNEL

State-of-the-art technology with host of features, a must for today’s shop process quality engineering
Two level password, prevents unauthorized alteration
Multiple-level display intensity for operators comfort
Inch & metric measuring ranges
Static & dynamic measurement
Permits incorporation of complex formulae for probe combination
Display of tolerance and control limit status – supports process control
Classifies tolerance band into uniform or non-uniform tailor made grades
Permits menu entries up to 16 different settings for quick application changeover
Wide range of process control based electrical outputs facilitates automation
Auto calibration
Compatible with half bridge and LVDT type inductive measuring probe
RS232 based interface with real time tagged measurements
Aesthetically appealing, sturdy and ergonomic design, suitable for shop-floor applications
USB interface to PC and flash drive

twin channel-microprocessor-based-twin-channel-2041-analogue_01

microprocessor-based-twin-channel-2041-analogue_02

microprocessor-based-twin-channel-2041-analogue_03

	2041
Metric Ranges	±10, ±30, ±100, ±300, ±1000 µm
Resolution	0.5, 1, 5, 10, 50 µm
INCH Ranges	±0.0003, ±0.001, ±0.003, ±0.01, ±0.03 inch
Resolution	0.00001, 0.00005, 0.0001, 0.0005, 0.001 inch

Check the PDF

Microprocessor based Twin Channel: 2045 Column

101 segment, 3 colour LED bar-graph column type measurement display
Column can be configured to originate from the centre or one end of scale
8-character alphanumeric dot-matrix digital type display shows measurements either in absolute or comparative form
Exclusive 8 character alphanumeric dot-matrix digital type display for menu setting
Five metric & five inch measuring ranges

FEATURES OF MICROPROCESSOR BASED TWIN CHANNEL

State-of-the-art technology with host of features, a must for today’s shop process quality engineering
Two level password, prevents unauthorized alteration
Multiple-level display intensity for operators comfort
Inch & metric measuring ranges
Static & dynamic measurement
Permits incorporation of complex formulae for probe combination
Display of tolerance and control limit status – supports process control
Classifies tolerance band into uniform or non-uniform tailor made grades
Permits menu entries up to 16 different settings for quick application changeover
Wide range of process control based electrical outputs facilitates automation
Auto calibration
Compatible with half bridge and LVDT type inductive measuring probe
RS232 based interface with real time tagged measurements
Aesthetically appealing, sturdy and ergonomic design, suitable for shop-floor applications
USB interface to PC and flash drive

microprocessor-based-twin-channel-2045-column_01

microprocessor-based-twin-channel-2045-column_02

microprocessor-based-twin-channel-2045-column_03

	2045
Metric Ranges	±10, ±30, ±100, ±300, ±1000 µm
Resolution	Bar graph : 0.2, 1, 2, 10, 20µm Dig. Display : 0.1,0.1,0.1, 1, 1µm
INCH Ranges	±0.0003, ±0.001, ±0.003, ±0.01, ±0.03 inch
Resolution	Bar graph : 0.00001, 0.00002, 0.0001, 0.0002, 0.001 inch Digital Display : 0.00001, 0.00001, 0.00001, 0.0001, 0.0001 inch

Check the PDF

Electronic Gauge: Twin Channel: 941 Analogue

- Dual scale 3-0-3 and 10-0-10 galvanometer with enclosed tolerance pointers
- 5 Metric and 5 Inch ranges

FEATURES OF ELECTRONIC GAUGE TWIN CHANNEL

- - Twin channel gauge units with selectable probe combinations of +A, -A, +B, -B, +A +B, +A -B, -A +B, -A -B
  - Inch and Metric measuring ranges
  - RED, GREEN and YELLOW tolerance lamps for REJECT, ACCEPT and REWORK indications
  - RS232 data output
  - Comprehensive outputs for further processing
  - Compatible with Half-bridge and LVDT type inductive measuring probes
  - Sturdy, Ergonomic design, suitable for shop floor environment
  - Splash proof and sealed against dust
  - Add-on Modules available for various applications e.g. Light Grading Module, Relay Module, etc.
  - Mains supply 220 volts AC

electronic-gauge-twin-channel-943-digital_01

electronic-gauge-twin-channel-943-digital_02

electronic-gauge-twin-channel-943-digital_03

	941
Metric Ranges	±10, ±30, ±100, ±300, ±1000 µm
Resolution	0.5, 1, 5, 10, 50 µm
INCH Ranges	±0.0003, ±0.001, ±0.003, ±0.01, ±0.03 inch
Resolution	0.00001, 0.00005, 0.0001, 0.0005, 0.001 inch