TAPARIA Punches are:-
• Made out of high grade Chrome steel accurately machined and heat treated.
• Deep knurling on the body ensures firm grip.
• It has Black phosphate finish.

CENTRE PUNCHES AND DRIFT PUNCHES

PROD. NO.	A	B	ΘC	ΘD	WT. GMS
1884	100	26.5	3	8	35
1984	100	33	4	10	50
1985	125	40	5	12	80
1986	150	50	5	12	100
1004-Drift Punch	100	38	3	10	45

LEATHER PUNCHES

PROD. NO.	A	B	ΘC	ΘD	WT. GMS
1786	100	6.5	7.0	12	60
1787	100	8.5	9.0	13	65
1788	100	10.5	11.5	14	70

DRIFT,CENTRE & LEATHER PUNCHES

PROD. NO.	CONTENTS
DCLP	1004,1884,1984,1985,1786,1787,1788

PIN PUNCHES

PROD. NO.	A	B	ΘC	ΘD	WT. GMS
PP 24	100	35	2.4	10	39
PP 32	100	35	2.4	10	39
PP 40	100	35	4.0	10	41
PP 48	100	35	4.8	10	42
PP 55	100	35	5.5	10	44
PP 63	100	35	6.3	10	46
PP 40 L	150	75	4.0	10	51
PP 48 L	150	75	4.8	10	55
PP 55 L	150	75	5.5	10	58
PP 63 L	150	75	6.3	10	62
PP 80 L	150	75	8.0	12	90
PP 100 L	150	75	10.0	12	108

Check the PDF

TAPARIA Chisels are:-
• Made from high grade steel,forged and ground.
• Differential heat treatment for cutting edge,and striking end,ensure long life.
• Bright,blue,painted finish.
• Generally Conforming to IS 5663-1970.

OCTAGONAL CHISELS

PROD. NO.	A	B	C	D	E	WT. GMS
101	135	9	1.50	40	9 A/F	58
102	150	16	3.25	70	12 A/F	134
104	200	22	3.75	90	16 A/F	320
105	200	25	4.00	100	19 A/F	365
106	250	30	4.50	120	22 A/F	710
107	300	32	4.75	130	22 A/F	904

FLAT CHISELS

Drop forged from high grade carbon steel.Hardened & tempered to ensure best combination of hardness & toughness. Hardness : 55 – 57 HRC on cutting edge. 35 – 45 HRC on striking portion. The body is rounded for comfortable grip. Cutting edges are ground accurately to appropriate angle for metal cutting. Available in 150.0 mm, 200.0 mm,235.0 mm.

PROD. NO.	A	B	C	D	E	F	WT. GMS
1046	150	20	3.0	57	17	10.00	171
1048	200	25	3.5	83	21	11.00	310
1059	235	24	2.5	90	24	6.35	268

CHISELS WITH RUBBER GRIP

PROD. NO.	A	B	C	D	E	F	WT. GMS
106 R	250	30	4.5	120	22	—	820
1059 R	235	24	2.5	90	24	6.35	350

PNEUMATIC CHISELS

PROD. NO.	A	B	C	ΘD	E	F	G. A/F	H. A/F	WT. GMS
1306	150	22	3.0	17.25	65	46.5	14.8	19	254
1307	175	22	3.0	17.25	65	46.5	14.8	19	302
1308	200	22	3.0	17.25	65	46.5	14.8	19	320
1309	225	22	3.0	17.25	65	46.5	14.8	19	430

Check the PDF

DOUBLE ENDED SPANNERS SETS (CHROME PLATED)

It is made from high grade steel,forged and accurately machined.Hardened and tempered to give long trouble free service. Provide with appropriate surface protection for rust prevention.

PROD. NO.	D1	D2	T	L	WT. GMS
DEP- 6 x 7	14.0	16.0	3.0	95	10
DEP- 8 x 9	17.5	19.0	3.5	100	20
DEP- 08 x 10	17.0	21.5	4.0	115	28
DEP- 09 x 11	21.5	24.0	5.0	120	38
DEP- 10 x 11	22.0	23.0	4.0	110	30
DEP- 10 x 12	25.5	27.0	5.5	130	38
DEP- 12 x 13	25.5	27.5	5.0	125	40
DEP- 13 x 16	27.0	33.0	6.0	170	75
DEP- 14 x 15	29.0	31.0	5.5	145	60
DEP- 14 x 17	30.0	35.0	6.0	170	75
DEP- 16 x 17	33.0	36.0	5.5	160	75
DEP- 18 x 19	37.5	40.0	6.5	180	115
DEP- 18 x 21	37.0	42.0	7.0	180	120
DEP- 19 x 22	40.0	45.0	7.5	200	150
DEP- 20 x 22	40.0	43.5	7.0	200	140
DEP- 21 x 23	41.0	45.0	7.0	210	155
DEP- 24 x 26	–	–	–	–	–
DEP- 24 x 27	48.5	53.5	7.5	225	215
DEP- 25 x 28	49.0	54.5	8.0	225	235
DEP- 30 x 32	58.0	62.5	8.5	250	320

DOUBLE ENDED SPANNER SETS

PROD. NO.	CONTENTS
DEP 06	6×7, 8×9, 10×11, 12×13, 14×15, 16×17
DEP 08	6×7, 8×9, 10×11, 12×13, 14×15, 16×17, 18×19, 20×22
DEP 10	6×7, 8×9, 10×11, 12×13, 14×15, 16×17, 18×19, 20×22,21×23, 24×27
DEP 12	6×7, 8×9, 10×11, 12×13, 14×15, 16×17, 18×19, 20×22,21×23, 24×27, 25×28, 30×32
DEP 010	6×7, 8×9, 10×11, 12×13, 14×15, 16×17, 18×19, 20×22,24×27, 30×32
DEPW 05	3/16 x 1/4, 5/16 x 3/8, 7/16 x 9/16, 14 x 17, 19 x 22
DW 06	1/8 x 3/16, 3/16 x 1/4, 1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2
DW 09	1/8 x 3/16, 3/16 x 1/4, 1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 3/4

DOUBLE ENDED SPANNERS SETS (RIBBED)

Drop forged from suitable grade steel. Heat treated with hardness 42 – 48 HRC to give maximum strength and wear resistance. Head at each end are of different sizes and set at an angle of 15Deg. Good accessibility in confined spaces due to slim and practical design.

PROD. NO.	D1	D2	T	L	WT. GMS
DER- 32 x 36	66.0	73.0	11.5	300	525
DER- 36 x 41	–	–	–	–	–
DER- 41 x 46	83.0	94.0	13.0	375	870
DER- 46 x 50	–	–	–	–	–
DER- 50 x 55	–	–	–	–	–

SINGLE ENDED OPEN JAW SPANNERS SETS

PROD. NO	S	D	T	L	WT. GMS
SER 19	–	–	–	–	–
SER 24	24	50	8.0	210	145
SER 30	30	62	10.0	260	290
SER 32	32	65	10.0	275	290
SER 36	36	72	11.0	300	400
SER 38	38	77	11.5	300	425
SER 41	41	83	12.5	340	425
SER 46	46	91	13.0	375	520
SER 50	50	101	15.0	400	920
SER 55	55	111	15.0	440	1150
SER 60	60	122	16.0	475	1375
SER 65	65	132	16.0	515	1640
SER 70	70	140	17.0	555	2000
SER 75	75	151	18.0	585	2220

RING SPANNERS SETS

Drop forged from high grade Chrome – Vanadium steel.Heat treated to give maximum strength and wear resistance.Good accessibility in confined spaces due to thin walled rings and are light and handy in use. Slightly rounded handles sand blasted fit snugly in the hand and gives comfortable grip.Clearly marked facilities choice of right size.Non damaging grip on the nut due to close wrench opening tolerances.

PROD. NO	D1	D2	T1	T2	L	WT. GMS
18 – 6 x 7	11.0	12.5	5.0	6.0	180	40
18 – 8 x 9	14.0	16.5	6.0	7.0	190	50
18 -10 x 11	17.0	18.0	7.0	8.0	200	75
18 – 12 x 13	19.0	21.0	8.0	8.5	215	95
18 – 14 x 15	22.0	24.0	8.5	10	230	105
18 – 16 x 17	25.0	26.5	10.0	10.5	245	160
18 – 18 x 19	28.0	29.0	11.0	11.0	260	210
18 – 20 x 22	31.0	33.0	12.0	13.0	290	270
18 – 21 x23	31.5	34.0	13.0	13.5	310	290
18 – 24 x 27	37.0	41.0	13.0	14.0	340	390
18 – 25 x 28	38.0	41.5	15.0	16.5	355	495
18 – 30 x 32	44.0	47.0	17.5	18.5	380	570

RING SPANNERS SETS

PROD. NO.	CONTENTS
1806	6×7, 8×9, 10×11, 12×13, 14×15, 16×17
1808	6×7, 8×9, 10×11, 12×13, 14×15, 16×17, 18×19, 20×22
1810	6×7, 8×9, 10×11, 12×13, 14×15, 16×17, 18×19, 20×22, 21×23, 24×27
18010	6×7, 8×9, 10×11, 12×13, 14×15, 16×17, 18×19, 20×22, 21×23, 24×27, 30×32
1812	6×7, 8×9, 10×11, 12×13, 14×15, 16×17, 18×19, 20×22, 21×23, 24×27, 25×28, 30×32
RW 06	1/8 x 3/16, 3/16 x 1/4, 1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2
RW 09	1/8 x 3/16, 3/16 x 1/4, 1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 3/4

SLUGGING OPEN ENDED SPANNERS

PROD. NO.	SIZES
SSO 27	27
SSO 30	30
SSO 32	32
SSO 34	34
SSO 36	36
SSO 38	38
SSO 41	41
SSO 46	46
SSO 50	50
SSO 55	55
SSO 60	60
SSO 65	65
SSO 70	70
SSO 75	75

SLUGGING RING SPANNERS

PROD. NO.	SIZES
SSO 27	27
SSO 30	30
SSO 32	32
SSO 34	34
SSO 36	36
SSO 38	38
SSO 41	41
SSO 46	46
SSO 50	50
SSO 55	55
SSO 60	60
SSO 65	65
SSO 70	70
SSO 75	75
SSO 80	80
SSO 85	85

Check the PDF

BOX WHEEL SPANNERS SETS

Wheel Spanners sets forged from high grade manganese steel.Scientifically heat treated to give maximum strength, wear resistance and long life. Available with bright finish in Nickle Chrome and black phosphate finish for protection from corrosion.

PRODUCT No.	SIZES	WT. GMS
1720/HD 1720	30 x 32	–
HD1725	27 x 30	–
1728	24 x 27	–
HD 1730	27 x 33	–
1731	27 x 27	–
HD 3030	30 x 30	–
1740	32 x 32	–
CHD 1740	32 x 32	–
HD 3233	32 x 33	–
1741	33 x 33	–
CHD 1741	33 x 33	–
1750	Tommy Bar	–
1751	Tommy Bar	–

L SPANNERS

PRODUCT No.	SIZES	WT. GMS
1535	18A/F	–
1536S	19A/F	–
1536	19A/F	–
1537	21A/F	–

CROSS RIM WRENCH

PRODUCT No.	SIZES	WT. GMS
CW0314	10 x 13, 11 x 14	–
CW7981	17 x 19, 18 x 21	–

TUBULAR BOX SPANNERS

PRODUCT No.	SIZES	WT. GMS
TS 6 x 7	6 x 7	–
TS 8 x 9	6 x 7	–
TS 10 x 11	6 x 7	–
TS 12 x 13	12 x 13	–
TS 14 x 15	14 x 15	–
TS 16 x 17	16 x 17	–
TS 18 x 19	18 x 19	–
TS 20 x 22	20 x 22	–
TS 21 x 23	21 x 23	–
TS 24 x 27	24 x 27	–
TS 25 x 28	25 x 28	–
TS 30 x 32	30 x 32	–

TUBULAR SPANNERS SET

PROD. NO	CONTENTS
TS 08	6 x7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22 Tommy Bar : 1) Dia 12 x 250mm , 2) Special Tommy Bar

C- CLAMPS

Body of Clamps hot drop forged from high grade steel.All parts fully heat treated and black phosphated for long trouble free service.Ideal for heavy duty application.

PROD. NO.	A	B	C	D	WT. GMS
1259-2	200	55	49	22	360
1260-3	260	80	62	22	570
1261-4	330	105	75	25	1060
1263-6	440	155	93	25	1700
1264-8	565	205	106	32	2840

F-CLAMPS-LIGHT DUTY

Light duty is good for carpentry.Fixed bracket and pressure plate are produced from a single piece which gives maximum strength. Swivelling type pressure plate can be fitted on uneven,angled or sloping surfaces.

PROD. NO.	A	B	C	D	E	WT. GMS
FC15-200	270	200	80	15.5	7.5	540
FC15-250	320	250	80	15.5	7.5	580
FC22-300	390	300	120	22	10.6	1360
FC22-400	490	400	120	22	10.6	1530
FC22-500	590	500	120	22	10.6	1700
FC22-600	690	600	120	22	10.6	1900

F-CLAMPS-HEAVY DUTY

PROD. NO.	A	B	C	D	E	WT. GMS
FC29-250	380	250	120	29.7	14.3	2700
FC29-300	430	300	120	29.7	14.3	2880
FC29-400	530	400	120	29.7	14.3	3180
FC29-500	630	500	120	29.7	14.3	3500
FC29-600	730	600	120	29.7	14.3	3800

Check the PDF

TAPARIA Hammers are:-
• Available in ball pein and claw version.
• Head drop forged made from high grade steel.
• Head differentially heat treated to ensure safe use.

HAMMERS WITH HANDLE

Partially Hardened up to 55 – 58 HRC on Striking surfaces needed as functional requirements for all types of hammers. Drop forged from high grade carbon steel.Phosphated and painted to provide anti rusting properties.Handle made from high quality axle wood and fixed firmly to hammer head, which does not come out even after long rough use.

PROD. NO	A	B	C	D	WT. GMS
WH 110 B*	260	64	18	20	170
WH 200 B/C	300	BO	20	25	325
WH 340 B*	315	90	26	28	425
WH 500 B/C	330	105	25	30	710
WH 600 B*	375	110	30	35	815
WH 800 B/C	375	120	32	40	1050
* Available in Ball Pein & Cross Pein

CLAW HAMMER WITH HANDLE

PROD. NO	A	B	ΘC	WT. GMS
CH 340	350	120	28	510
CLH 450	310	127	27	620
*Only Available in Ball Pein

MACHINIST HAMMER WITH HANDLE

PROD. NO	A	B	ΘC	WT. GMS
MH 100	260	85	15	160
MH 200	280	95	19	270
MH 300	300	105	22	430
MH 400	310	115	25	510
MH 500	320	120	27	600

CLUB HAMMER WITH HANDLE

PROD. NO	A	B	C	WT .GMS
GH 800	250	92	36	950
GH 1000	260	96	38	1150
GH 1250	260	102	42	1400
GH 1500	260	110	44	1650

CLUB HAMMER WITHOUT HANDLE

PROD. NO	B	C	WT. GMS
GHH 1250	102	42	1 250

SLEDGE HAMMER -HEAD ONLY

PROD. NO	B	C	WT. GMS
SHH 900	105	36	900
SHH 1350	120	42	1350
SHH 1800	133	46	1800
SHH 2700	155	54	2700
SHH 3600	168	58	3600

ELECTRICIAN  HAMMER

PROD. NO	A	B	C	WT. GMS
SQ 15	280	140	15	250

SOFT FACED  HAMMER WITH HANDLE

PROD. NO	A	B	C	D	WT.GMS
SFH 20	272	54	—	20	240
SFH 25	272	90	—	25	320
SFH 30	272	90	—	30	425
SFH 40	330	122	—	40	800
SFH 50	330	124	—	50	1120

SOFT FACED  HAMMER SPARES

PROD. NO	A	B	C	D	WT.GMS
SFH 20 S	272	54	—	20	240
SFH 25 S	272	90	—	25	320
SFH 30 S	272	90	—	30	425
SFH 40 S	330	122	—	40	800
SFH 50 S	330	124	—	50	1120

Check the PDF

TAPARIA Pipe Wrenches Vice :-
• Having precision machined integral teeth with included angle of 76 Deg. of the teeth of Jaws provides best matching, strength and firm gripping without biting on the job as happen in other makes.
• Differential hardness pattern of the handle and jaw permits wear resistance teeth and tough body.
• The jaws are drop forged from high grade carbon steel.

PIPE WRENCHES VICE (STILLSON TYPE)

PROD. NO.	D	T	L	WT. GMS
1272	33	15	250	500
1273	42	19	300	750
1274	48	21	350	1000
1275	60	24	450	1540
1276	73	28	600	2920
1277	90	34	900	5880

UNIVERSAL PIPE WRENCH

PROD. NO.	A	B	C	D	WT. GMS
1510	38	17	275	310	690
2014	52	21	360	420	1244

HEAVY DUTY PIPE WRENCH

Drop forged from Chrome Molybdenum (Cr Mo) Steel. Precision machined jaw teeth with appropriate teeth angle enables positive grip on the job.Differential hardening of teth and body of the jaw enables high torque and wear resistance of the jaw teeth.Handle made from ductile cast iron which enables higher torque values for heavy duty pipe wrenches.

PROD. NO.	NOM. PIPE	T	L	WT. GMS
HPW 08	35	15	200	4200
HPW 18	76	26	450	2400
HPW 10	49	17	250	850
HPW 24	33	26	600	4100
HPW 12	60	23	300	1100
HPW 36	140	37	900	8800
HPW 14	60	23	350	1650
HPW 48	166	37	1200	13800

ALUMINIUM HANDLE  PIPE WRENCH

Drop forged jaws and differential hardened teeth and body of the jaw enables high torque and high wear resistance of the jaw teeth. Precision machined jaw teeth with appropriate teeth angle enables positive grip on the job.Handle made from special grade Aluminium Alloy which reduces the weight of the AL.PIPE WRENCH by upto 40% as compared to respective sizes of heavy duty pipe wrenches.

PROD. NO.	NOM. PIPE	T	L	WT. GMS
APW 10	49	17	250	600
APW 24	90	33	600	2500
APW 14	60	23	350	1000
APW 36	140	37	900	4750
APW 18	76	26	450	1500
APW 48	166	37	1200	7700

CHAIN  PIPE WRENCH

Drop forged jaws with high – grade steel.An accurately machined jaw teeth on both sides of the jaw provides firm gripping and are easy for reverse operation. Scientifically heat – treated to give maximum strength and wear resistance.

PROD. NO.	NOM. PIPE SIZE MAX ΘD	L	L1	E	T	WT. GMS
CPW04	CPW04	900	165	80	12	1100
CPW06	CPW06	1000	180	90	13	9500
CPW08	CPW08	1200	190	90	14	11800
CPW10	CPW10	1300	215	95	15	13500
CPW12	CPW12	1400	215	95	15	14500
CPW16	CPW16	1585	215	95	15	16500

SPARES  FOR CHAIN  PIPE WRENCH

PROD. NO.	NOM. PIPE ΘD	T	L	WT. GMS
CPW 04 C	–	–	675	–
CPW 06 C	–	–	825	–
CPW 08 C	–	–	975	–
CPW 10 C	–	–	1125	–
CPW 12 C	–	–	1275	–

PIPE VICES

Body made from malleable cast iron.Jaws are drop forged and differentially Hardened.Hardness on the body of the jaw : 40 to 45 HRC & Teeth of the Jaw is Above 50 HRC.Vertical upright section of the base is provided with holes for mounting of the frame.Accurately machined jaws provide firm grip on the pipe. Body of the pipe vice painted and jaw blackodised to guard against rusitng.

PROD. NO.	NOM. PIPE SIZE ΘA	ΘD	T	L	WT. GMS
PV 00	10-40	16	95	60	1100
PV 01	10-60	24	145	105	4250
PV 02	10-90	24	190	105	5600
PV 03	15-115	24	215	120	7800
PV 04	15-165	30	260	160	10000

Check the PDF

TAPARIA Socket sets :-
• Consists of selected sockets and accesories.
• Neatly packed in attractive powder coated carrying case.

SOCKET SETS 1/4″SQUARE DRIVE

PROD. NO.	CONTENTS
S 1/4 H (17 Sockets + 6 Accesories)	Sockets-4,4.5,5,5.5,6,7,8,10,11,12,13,14
	Adapter-Hex 1/4 x SQ, 1/4
	Adapter Torx-T20,T25,T30,T40
	Accesories-A733 – T-HANDLE, A 743- EXTN. BAR, A 753- EXTN. BAR,A 773- UNIVERSAL JOINT, A 703- NUT SPINNER FLEXIBLE,A 715- RATCHET HANDLE

SOCKET SET 3/8″SQUARE DRIVE

PROD. NO.	CONTENTS
S 3/8 H (14 Sockets + 6 Accesories)	Sockets-6,7,8,9.10,11,12,13,14,17,19,21,22
	Spark Plug Socket- BSP21
	Accesories-B733 – T-HANDLE, B 743- EXTN. BAR, B 753- EXTN. BAR,B 773- UNIVERSAL JOINT, B 703- NUT SPINNER FLEXIBLE,B 715- RATCHET HANDLE

SOCKET SET 12.7 MM ( 1/2″) SQUARE DRIVE

PROD. NO.		CONTENTS
Bihexagonal Sockets Set	Hexagonal Sockets Set
S-11M (22 Sockets + 5 Accesories)	S-11H (22 Sockets + 5 Accesories)	10,11,12,13,14,15,16,17,18,19,21,22 23,24,26,27,28,29,30,32,33,34, Accesories 1753,1763,1773,1733,1715
S-14M (22 Sockets + 5 Accesories)	S-14H (22 Sockets + 5 Accesories)	8,9,10,11,12,13,14,15,16,17,18,19,21,22 23,24,26,27,28,29,30,32 Accesories 1753,1763,1773,1733,1715
S-15M (19 Sockets + 5 Accesories)	S-15H (19 Sockets + 5 Accesories)	11,12,13,14,15,16,17,18,19,21,22 23,24,26,27,28,29,30,32 Accesories 1753,1763,1773,1733,1715,1783
S-16M (19 Sockets + 6 Accesories)	S-16H (19 Sockets + 6 Accesories)	11,12,13,14,15,16,17,18,19,21,22 23,24,26,27,28,29,30,32 Accesories 1753,1763,1773,1733,1715,1783
S-22M (11 Sockets + 4 Accesories)	S-22H (11 Sockets + 4 Accesories)	10,11,13,14,17,19,22,24,27,30,32 Accesories 1753,1763,1703,1715
S-23M (14 Sockets + 4 Accesories)	S-23H (14 Sockets + 4 Accesories)	8,9,10,11,12,13,14,15,16,17,18,19,21,22 Accesories 1753,1734,1763,1633

EXEL SOCKET SET 12.7 MM ( 1/2″) SQUARE DRIVE

PROD. NO.		CONTENTS
Bihexagonal Sockets Set	Hexagonal Sockets Set
S-11M X L (22 Sockets + 5 Accesories)	S-11H X L (22 Sockets + 5 Accesories)	10,11,12,13,14,15,16,17,18,19,21,22 23,24,26,27,28,29,30,32,33,34 Accesories 1753,1763,1773,1733,1715
S-14M X L (22 Sockets + 5 Accesories)	S-14H X L (22 Sockets + 5 Accesories)	8,9,10,11,12,13,14,15,16,17,18,19,21,22 23,24,26,27,28,29,30,32 Accesories 1753,1763,1773,1733,1715
S-15M X L (19 Sockets + 5 Accesories)	S-15H X L (19 Sockets + 5 Accesories)	11,12,13,14,15,16,17,18,19,21,22 23,24,26,27,28,29,30,32 Accesories 1753,1763,1773,1733,1715,1783
S-16M X L (19 Sockets + 6 Accesories)	S-16H X L (19 Sockets + 6 Accesories)	11,12,13,14,15,16,17,18,19,21,22 23,24,26,27,28,29,30,32 Accesories 1753,1763,1773,1733,1715,1783
S-22M X L (11 Sockets + 4 Accesories)	S-22H X L (11 Sockets + 4 Accesories)	10,11,13,14,17,19,22,24,27,30,32 Accesories 1753,1763,1703,1715
S-23M X L (14 Sockets + 4 Accesories)	S-23H X L (14 Sockets + 4 Accesories)	8,9,10,11,12,13,14,15,16,17,18,19,21,22 Accesories 1753,1734,1763,1633
S-31M X L (11 Sockets + 4 Accesories)	S-31H X L (11 Sockets + 4 Accesories)	11,14,17,19,22,24 Accesories 1734

 SOCKET SET 19 MM ( 3/4″) SQUARE DRIVE

PROD. NO.		CONTENTS
Bihexagonal Sockets Set	Hexagonal Sockets Set
S 3/4 BH (10 Sockets + 4 Accesories)	S 3/4 H (10 Sockets + 4 Accesories)	Sockets-22mm,24mm,27mm,30mm,32mm, 36mm,38mm,41mm,46mm,50mm Accesories 2715,2753,2763,2733

BI-HEXAGONAL SOCKET SET

PROD. NO.		CONTENTS
S 3/4 BH (10 Sockets + 4 Accesories)	S 3/4 H (10 Sockets + 4 Accesories)	Sockets-36mm,41mm,46mm,50mm,55mm, 60mm,65mm,70mm,75mm & 80mm Accesories 3715,3733,3753,3763

Check the PDF

T-HANDLE

SIZE	PROD. NO	A/F	L	ΘD	ΘE	ΘF	WT. GMS
1/4″ Drive	A 733	6.30	115	14	8.0	6	45
3/8″ Drive	B 733	9.50	200	19	12.6	10.5	75
1/2″ Drive	1733-S	12.7	250	27	16.6	13	345
	1733	12.7	300	27	16.6	13	400
3/4″ Drive	2733	19.0	500	38	24.5	18	1220
1″ Drive	3733	25.2	630	49	33.8	25	2970

EXTENSION BAR

SIZE	PROD. NO	L	ΘA	ΘB	ΘD	SQ.(1)	SQ.(2)	WT. GMS
1/4″ Drive	A 743	50	12	–	8.0	6.40	6.30	25
	A 753	100	12	–	8.0	6.40	6.30	45
3/8″ Drive	B 743	76	18	–	12.0	9.60	9.50	75
	B 753	152	18	–	12.0	9.60	9.50	140
1/2″ Drive	1713	50	22	–	12.8	12.8	12.8	85
	1743	75	22	–	12.8	12.8	12.8	110
	1753	125	22	–	12.8	12.8	12.8	150
	1763	255	22	–	12.8	12.8	12.8	290
3/4″ Drive	2753	255	35	–	19.1	19.1	19.1	700
	2763	385	35	–	19.1	19.1	19.1	980
1″ Drive	3753	200	48	–	29.0	25.2	25.8	1320
	3763	400	48	–	29.0	25.2	25.8	2410

RATCHET HANDLE

SIZE	PROD. NO	FIG. NO	A	B	L	WT. GMS
1/4″ Drive	A 715	1	12	27	160	135
3/8″ Drive	B 715	1	13	27	215	340
1/2″ Drive	1715	2	18	35	255	480
3/4″ Drive	2715 with Sq. Coupler	–	30	65	500	2040
1″ Drive	3715 R-H	1	32	69	–	–
	T-BAR	2	Θ28	–	562	2680

FLEXIBLE  HANDLE

SIZE	PROD. NO	FIG. NO	A	B	L	WT. GMS
1/4″ Drive	A 703	2	11	16.5	145	115
3/8″ Drive	B 703	2	15	22	225	215
1/2″ Drive	1703	1	20	25	250	390

UNIVERSAL JOINT

SIZE	PROD. NO	FIG. NO	A	B	L	WT. GMS
1/4″ Drive	A 773	3	14	14	39	25
3/8″ Drive	B 773	3	19	19	55	65
1/2″ Drive	1773	3	25	22	74	160

ANGLE HANDLE

PROD. NO	L1	L2	ΘA	ΘB	SQ	WT. GMS
1734	189	56	16.6	13	12.7	235

SPEEDER BRACE

PROD. NO	ΘD1	ΘD2	L	L1	SQ	WT. GMS
1783	13	22	397	146	12.7	760

3/4 SQUARE DRIVE

PROD. NO	SQ	L	WT. GMS
2716	19.5	52	150

Check the PDF

TAPARIA Sockets are:-
• Forged from high grade Chrome Vanadium steel.
• Scientifically heat treated to give maximum strength and wer resistance.
• Nickel Chrome plating finish to enable rust prevention and good looks.

SOCKETS 1/4″ SQUARE DRIVE

PROD. NO.	FIG. NO.	A	B	C	ΘD	ΘE	A/F	WT. GMS
A 4 H	1	25	13	12	6.8	12	4	10
A 4.5 H	1	25	13	12	7.3	12	4.5	10
A 5 H	1	25	13	12	8	12	5	10
A 5.5 H	1	25	13	12	8.5	12	5.5	10
A 6 H	1	25	13	12	9	12	6	10
A 7 H	1	25	13	12	10.5	12	7	10
A 8 H	1	25	13	12	11.7	11	8	10
A 10 H	3	25	11	14	14	12	10	10
A 11 H	3	25	11	14	16	14	11	20
A 12 H	3	25	11	14	17	15	12	20
A 13 H	3	25	11	14	18	16	13	25
A 14 H	3	25	11	14	19	17	14	30

SOCKETS 3/8″ SQUARE DRIVE

PROD. NO.	FIG. NO.	A	B	C	ΘD	ΘE	A/F	WT. GMS
B 6 H	1	28	16	12	10.3	17	6	25
B 7 H	1	28	16	12	11	17	7	25
B 8 H	1	28	16	12	12	17	8	25
B 9 H	1	28	16	12	13.3	17	9	25
B 10 H	1	28	16	12	14.5	17	10	25
B 11 H	3	28	16	12	16	17	11	25
B 12 H	3	28	12	16	17	15.5	12	25
B 13 H	3	28	12	16	17.8	16.5	13	25
B 14 H	3	28	12	16	19.7	17	14	25
B 17 H	3	30	12	18	23.7	20	17	45
B 19 H	3	30	12	18	26	23	19	60
B 21 H	3	30	12	18	28	25	21	70
B 22 H	3	30	12	18	29.7	26	22	80

SOCKETS 12.7 MM 1/2″ SQUARE DRIVE(FLANK DRIVE)

HEXAGONAL & BIHEXAGONAL
PROD. NO.	FIG. NO.	A	B	C	ΘD	ΘE	A/F	WT. GMS
8	1	36	20	16	12.0	22	8	45
9	1	36	20	16	13.0	22	9	45
10	1	36	20	16	16.0	22	10	45
11	1	36	20	16	17.5	22	11	48
12	1	36	20	16	18.7	22	12	50
13	1	36	20	16	20.0	22	13	52
14	1	36	20	16	21.3	22	14	52
15	2	36	–	–	22.5	–	15	52
16	2	38	–	–	23.5	–	16	52
17	2	38	–	–	25.0	–	17	75
18	2	38	–	–	25.5	–	18	70
19	2	38	–	–	27.5	–	19	90
21	2	40	–	–	28.9	–	21	104
22	2	40	–	–	31.0	–	22	125
23	2	40	–	–	31.3	–	23	120
24	3	43	18	25	32.5	30	24	130
26	3	43	18	25	35.2	30	26	140
27	3	43	18	25	36.4	30	27	150
28	3	43	18	28	37.7	30	28	165
29	3	46	18	28	38.9	30	29	165
30	3	46	18	28	40.4	30	30	185
32	3	46	17	29	42.7	30	32	195
33	3	46	17	29	43.9	30	33	195
34	3	46	17	29	45.2	30	34	190

EXEL SOCKETS 12.7 MM 1/2″ SQUARE DRIVE

HEXAGONAL & BIHEXAGONAL
PROD. NO.	FIG. NO.	A	B	C	ΘD	ΘE	A/F	WT. GMS
8	1	36	20	16.5	13.5	22	8	50
9	1	36	20	16.5	14.5	22	9	50
10	1	36	20	15.7	14.5	22	10	50
11	1	38	21.5	16.5	16.7	22	11	50
12	1	38	21.5	16.5	17.8	22	12	50
13	1	38	21.5	16.5	19.0	22	13	50
14	1	38	21.5	16.5	20.2	22	14	50
15	1	38	21.5	16.5	21.0	22	15	50
16	3	38	16	22	21.8	20.5	16	50
17	3	38	16	22	23.8	22	17	60
18	3	38	16	22	25.8	22	18	80
19	3	38	16	22	25.8	22	19	70
20	3	38	16	22	27.8	25	20	80
21	3	38	16	22	28.0	25	21	70
22	3	38	16	22	29.8	26	22	90
23	3	38	16	22	31.8	28	23	115
24	3	38	16	22	31.8	28	24	105
25	3	40	17	23	33.7	30	25	125
26	3	42	17	25	35.5	31	26	158
27	3	42	17	25	35.8	32	27	158
28	3	44	17	27	37.6	33	28	188
29	3	44	17	27	38.0	33	29	180
30	3	44	16	28	39.5	34	30	200
32	3	44	16	28	41.5	36	32	225

DEEP  SOCKETS 12.7 MM 1/2″ SQUARE DRIVE

PROD. NO.	FIG. NO.	A	B	C	ΘD	ΘE	A/F	WT. GMS
L8H	1	76	42	34	14	22	8	110
L10H	1	76	42	34	16	22	10	110
L11H	1	76	42	34	17	22	11	110
L12H	1	76	42	34	18	22	12	110
L13H	1	76	42	34	19	22	13	115
L14H	1	76	42	34	20.5	22	14	120
L15H	3	76	30	46	22	22	15	120
L16H	3	76	30	46	22	22	16	110
L17H	3	76	30	46	24	22	17	130
L18H	3	76	30	46	26	24	18	160
L19H	3	76	30	46	26	24	19	150
L20H	3	76	30	46	28	25	20	175
L21H	3	76	30	46	28	25	21	165
L22H	3	76	30	46	30	26	22	195
L24H	3	76	30	46	32	28	24	215
L27H	3	76	30	46	36	32	27	280
L30H	3	76	30	46	40	28	34	350

HEAVY DUTY HEXAGONAL SOCKETS 12.7 MM-EXTRA LONG SOCKET 1/2″ SQUARE DRIVE

PROD. NO.	FIG. NO.	A	B	C	ΘD	ΘE	A/F	WT. GMS
HD 10	1	36	20	16	17.0	22.5	10	55
HD 11	1	36	20	16	18.5	22.5	11	60
HD 13	1	38	21	17	21.2	24.0	13	80
HD 14	1	38	21	17	22.5	24.0	14	80
HD 17	2	38	–	–	26.5	–	17	85
HD 19	2	38	–	–	29.3	–	19	120
HD 22	2	38	–	–	33.3	–	22	170
EL 10	–	150	18	15	16.0	23.0	10	174
LD 18	2	80	–	–	26.5	–	18	165
LD 24	4	80	25	55	34.3	31.5	24	280

IMPACT SOCKETS HEXAGONAL 12.7 MM-1/2″ SQUARE DRIVE

HEXAGONAL & BIHEXAGONAL
PROD. NO.	FIG. NO.	A	B	C	ΘD	ΘE	A/F	WT. GMS
IM8	1	36	21	15	13.5	25	8	60
IM9	1	36	21	15	14.5	25	9	65
IM10	1	36	21	15	17.0	25	10	65
IM11	1	36	21	15	18.5	25	11	65
IM12	1	36	21	15	20.0	25	12	65
IM13	1	36	21	15	21.5	25	13	75
IM14	1	36	21	15	22.5	25	14	70
IM15	1	36	21	15	24.0	25	15	80
IM16	2	38	–	–	25.0	25	16	80
IM17	2	38	–	–	26.5	26.5	17	95
IM18	2	38	–	–	28.0	28	18	105
IM19	2	38	–	–	30.0	30	19	120
IM20	3	40	17	23	31.0	30	20	125
IM21	3	40	17	23	32.0	30	21	130
IM22	3	40	17	23	33.5	30	22	140
IM23	3	43	18	25	35.0	30	23	165
IM24	3	43	18	25	36.0	30	24	170
IM26	3	43	18	25	38.9	30	26	175
IM27	3	43	18	25	40.0	30	27	180
IM28	3	46	19	27	42.5	30	28	200
IM29	3	46	19	27	42.5	30	29	215
IM30	3	46	19	27	44.0	30	30	220
IM31	3	46	19	27	44.5	30	31	225
IM32	3	46	19	27	46.5	30	32	245

SOCKETS 12.7MM-1/2″ SQUARE DRIVE SPARK PLUG (C.R.V)

PROD. NO.	FIG. NO.	A	B	C	ΘD	ΘE	A/F	WT. GMS
SP 16	1	36	20	16	14.0	22.5	8	50
SP 21	1	36	20	16	15.0	22.5	9	50

SOCKETS 19MM (3 /4″) SQUARE DRIVE

C22	1	50	30	20	33.0	36	22	215
C24	1	50	30	20	35.0	36	24	210
C27	2	51.5	–	–	38.0	–	27	220
C28	3	52	21	31	40.0	36	28	235
C29	3	52	21	31	40.0	38	29	240
C30	3	54	21	33	42.0	38	30	265
C32	3	56	21	35	44.0	38	32	300
C34	3	58	22	36	46.0	38	34	320
C36	3	58	20	38	50.0	42	36	395
C38	3	60	20	40	56.0	45	38	450
C41	3	64	24	40	56.0	45	42	535
C42	3	64	22	42	58.0	45	42	590
C46	3	68	21	47	62.0	48	46	685
C50	3	72	24	48	68.0	48	50	800
C55	3	76	26	48	74.0	48	55	955
C60	3	78	30	48	78.0	48	60	910
C65	3	85	30	55	86.0	48	65	1570
C70	3	85	30	55	91.5	48	70	1680

SOCKETS 1″ SQUARE DRIVE

PROD. NO.	FIG. NO.	A	B	C	ΘD	ΘE	A/F	WT. GMS
D36	3	60	20	40	50	46	36	400
D38	3	65	22	43	54	46	38	520
D41	3	65	25	40	54	46	46	520
D46	3	75	26	49	65	50	46	830
D50	3	75	26	49	69	56	50	1050
D55	3	80	28	52	75	56	55	1200
D60	3	84	30	54	81	56	60	1350
D65	3	88	30	58	87	56	65	1550
D70	3	94	30	64	93	68	75	2500
D75	3	98	34	64	93	68	70	2100
D80	3	103	34	69	105	68	80	2600

Check the PDF