Micrometers Archives - Page 13 of 21 - Gokul Traders

High contrast analog display
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
IP 40
instruction manual
battery
case

Height of Digits

10 mm

Technical Data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit µm	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4157010	0 – 25	0 – 1″	0.001 / .00005″	2 µm	6.5 mm	0.5 mm	5 – 10

Functions

RESET (set display to zero)
mm/inch
HOLD (storage of measured values)
LOCK function (key lock)

Sliding spindle
High contrast analog display
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
Lacquered steel frame, heat insulated
Digimatic
Opto RS232C
USB
IP 52
battery
instruction manual
case

Height of Digit

8.5mm

Technical Data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit µm	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4151724	0 – 25	0 – 1″	0.001 / .00005″	4 µm	6.5 mm	0.635 mm	5 – 10

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to preset)
mm/inch
PRESET (for entering a numerical value)
DATA (data transmission via connection cable)
LOCK function (key lock)

MICROMAR 40 EWR DIGITAL OUTSIDE MICROMETER

High contrast analog display
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
Lacquered steel frame, heat insulated
Digimatic
Opto RS232C
USB
Battery life approx. 2 years
IP 65
instruction manual
battery
setting standard (measuring range of 25-50 mm)
case

Height of digits

8.5 mm

Technical data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Error limit µm	Notes error limit	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
<4151705	0 – 25	0 – 1″	0.001 / .00005″	2 µm	at fixed zero point	6.5 mm	0.635 mm	5 – 10
4151706	25 – 50	1 – 2″	0.001 / .00005″	2 µm	at fixed zero point	6.5 mm	0.635 mm	5 – 10
4151707	50 – 75	2 – 3″	0.001 / .00005″	3 µm	at fixed zero point	6.5 mm	0.635 mm	5 – 10
4151708	75 – 100	3 – 4″	0.001 / .00005″	3 µm	at fixed zero point	6.5 mm	0.635 mm	5 – 10
4151740	100 – 125	4 – 5″	0.001 / .00005″	6 µm		6.5 mm	0.635 mm	5 – 10
4151741	125 – 150	5 – 6″	0.001 / .00005″	6 µm		6.5 mm	0.635 mm	5 – 10
4151742	150 – 175	6 – 7″	0.001 / .00005″	7 µm		6.5 mm	0.635 mm	5 – 10
4151743	175 – 200	7 – 8″	0.001 / .00005″	7 µm		6.5 mm	0.635 mm	5 – 10

Functions

RESET (set display to zero)
ABS (display can be set to zero without losing reference to preset)
mm/inch
PRESET (for entering a numerical value)
LOCK function (key lock)
DATA (data transmission via connection cable)

MICROMAR 40 EWR DIGITAL OUTSIDE MICROMETER SET

High contrast analog display
Stainless spindle is hardened throughout and ground
Spindle and anvil are carbide tipped
Rapid drive
Ratchet is integrated in the thimble
Lacquered steel frame, heat insulated
Digimati
Opto RS232C
USB
Battery life approx. 2 years
IP 65
instruction manual
battery
setting values
case

Height of digits

8.5mm

Technical data

Order no.	Measuring range mm	Measuring range inches	Resolution mm/inch	Spindle diameter	Spindle thread pitch_mm	Measuring force (N)
4151709	0 – 100	0 – 4″	0.001 / .00005″	6.5 mm	0.635 mm	5 – 10

Functions

AUTO-ON / OFF
RESET (set display to zero)
ABS (display can be set to zero without losing reference to preset)
mm/inch
Lock/Unlock
PRESET (for entering a numerical value)
DATA (data transmission via connection cable)

Optional accessory: setting ring (code 6312)

Check the PDF

Graduation: 0.01mm
Optional accessory:
ball tips (code 7391)
V-shaped and cone-shaped anvils(code 7321),
zero block for V-shaped and cone-shaped
anvils(code 3226-SP)

Check the PDF

Graduation 0.01mm
Carbide measuring faces

Check the PDF

Graduation 0.01mm
Accuracy:(3+n+L/50)μm
n=number of rods
L=maximum measuring length(mm)
Travel of micrometer head 50mm
Carbide measuring faces

tubular inside micrometer-3224_2000_01

Check the PDF

Graduation 0.01mm
Accuracy:(3+n+L/50)μm
n=number of rods
L=maximum measuring length(mm)
Travel of micrometer head 25mm
Supplied with setting standards
Carbide measuring faces

tubular inside micrometer-3225-500

tubular inside micrometer-3225-500_01

Check The PDF