• Attachment for interrupted surface measurement
  No.178-034
  Best suited for measurement of the flat surface of a workpiece that has partial indentations and steps and that is hard to set the drive unit. Combination use with the magnet type specimen holder (Option: No.12AAA910) further improves the ease of operation.

• Attachment for measuring inside bores and holes
  No.178-035
  Greatly facilitates measurement of internal wall surfaces of, for example, cylinder-block bores.
  • Applicable diameter: ø75 to 95mm
  • Accessible depth: 30 to 135mm

Digimatic mini-processor
It is possible to process Digimatic data output from the Surftest SJ series with the DP-1VR. This compact, hand-held device can provide printouts of measurement data and various statistical analyses results such as histograms, D-charts, and X bar R control charts.

• Digimatic mini-processor DP-1VR No.264-504
• Digimatic connecting cable
  Connecting cable 1m: No.936937
  Connecting cable 2m: No.965014
  Note: The symbol ʻµmʼ is not printable, but measurement results can still be printed out without setting the measurement unit.

Introduction of the specified communication program for Surftest SJ-210/310/410 series, 500, SV-2100

System environments supporting the operation

• OS: Windows XP-SP3, Windows Vista, Windows 7 , Windows 8

• Spreadsheet software: Microsoft Excel 2000, Microsoft Excel 2007, Microsoft Excel 2002, Microsoft Excel 2010, Microsoft Excel 2003, Microsoft Excel 2013.

Optional USB cable is required.

• USB communication cable for SJ-210: No.12AAL068
• USB communication cable for SJ-310/410*: No.12AAD510
• USB communication cable for SJ-500/SV-2100*: No.12AAH490
  *Equivalent to Type AB for the communication between the device and host

Input tool for measurement data input units
Using this tool, measurement data from the Surftest SJ series can be instantly imported into commercially-available spreadsheet software through a USB or PS-2 keyboard socket on a PC. Refer to the Catalog (No.4279) for more details

• Input tool
  ・USB keyboard signal conversion model
  IT-012U: No.264-012-10
  USB-ITN-D (Direct type): No.06ADV380D
• Digimatic connecting cable
  Connecting cable 1m: No.936937
  Connecting cable 2m: No.965014

* Refer to pages A-7 to A-9 for details of U-WAVE.
* Refer to pages A-5 to A-6 for details of the input tool

Setting attachments*

Improves measurement efficiency by allowing the setup of multiple workpieces of the same type and the positioning of hard-to-access features of a workpiece.
*Not available for the transverse tracing drive unit

• Attachment for the measurement of cylinder shaft direction
  No.178-033
  The V-width is adjustable to the cylinder diameter, facilitating axial measurement of a wide range of cylinder diameters.
  • Applicable diameter: ø5 to 150mm
  

Printer for SJ-210
Assessed profiles and calculation results and curves can be printed out by connecting the SJ-210-dedicated printer, which is palm sized (W×D×H: 93×125×70mm) and can run on an internal battery.

• Power supply can be selected. (AC adapter or battery pack)
• Printable items: Measurement conditions, calculation results, assessed profile, bearing area curve (BAC), amplitude distribution curve (ADC), GO/NG judgment
• Printer for SJ-210
  (Provided with the connecting cable and printer paper (×6 packs))
  No.178-421
• Printer paper
  Standard type (x5 packs): No.270732
  High-durability type (x5 packs): No.12AAA876

Surface Roughness / Contour Analysis Software FORMTRACEPAK
Measurement data from the SJ-210/310/410 series can be imported into FORMTRACEPAK running on a desktop type surface roughness tester via an optional memory card to perform a more advanced analysis if required.

Detector

• Standard detectors

*Tip radius /Tip angles

• Small hole detectors

*Tip radius /Tip angles

• Extra small hole detectors

*Tip radius /Tip angles

• Gear-tooth surface detectors

*Tip radius /Tip angles

• Deep groove detectors

*Tip radius /Tip angles

Optional Accessories for Drive Units

• Nosepiece for flat surfaces

No.12AAA217 *Standard accessory for the standard/retractable drive unit of the SJ-310 series
*Not available for the transverse tracing drive unit

• V-type adapter

No.12AAE644 *Transverse tracing type standard accessory.
*Dedicated to the transverse tracing drive unit.

• Extension rod (50mm)

No.12AAA210 *Not available for the transverse tracing drive unit

• Adapter for flat surface No.12AAA219
  *Not available for the transverse tracing drive unit

• Magnetic stand adapter
  No.12AAA221 (Shaft diameter of the mounting section: ø8mm)
  No.12AAA220 (Shaft diameter of the mounting section: ø9.5mm)

• Nosepiece for cylindrical surfaces
  No.12AAA218
  *Standard accessory for the standard/retractable drive unit of the SJ-310 series
  *Not available for the transverse tracing drive unit

• Point-contact adapter
  No.12AAE643
  *Transverse tracing type standard accessory.
  *Dedicated to the transverse tracing drive unit

• Extension cable (1m)(Note: Only one rod can be used.)
  No.12BAA303
  *For the connection between the calculation display unit and drive unit

• Support feet set
  No.12AAA216
  *Standard accessory for the standard/retractable drive unit of the SJ-310 series
  *Not available for the transverse tracing drive unit *Adjustment range is 28mm from bottom face.
  
• Height gage adapter
  Note:Dedicated to the height gage whose scriber mounting dimensions are 9 ×9 mm
  

SPECIFICATIONS

*1: Calculation is available only when selecting the VDA, ANSI, or JIS 1982 standard.
*2: Calculation is available only when selecting the ISO 1997 standard.
*3: Calculation is available only when selecting the JIS 2001 standard.
*4: Calculation is available only when selecting the ANSI standard.
*5: Not available when selecting the JIS 1982 standard.
*6: Only the mean value rule is available for the ANSI standard. 16% rule is not available when selecting the VDA standard.
*7: Not available when using the AC adapter. Auto sleep can be set to OFF.
*8: For the connection between the calculation display unit and drive unit
To denote your AC line voltage add the following suffixes (e.g. 178-570-01A).
A for 120V, C for 100V, D for 230V, E for 230V (for UK), DC for 220V (for China), K for 220V (for Korea)

Advanced handheld tester that is easy to operate and meets a variety of needs

• Equipped with a large, touch-screen color graphic LCD to achieve intuitive operation and excellent ease of use.
• Features new measurement assistance and analysis functions to improve ease of operation while maintaining the operability of previous models.
• The detector can be oriented to any position according to the workpiece: a horizontal, inclined, overhead or perpendicular surface can be tested. Many optional accessories are available to support this feature. (Common between SJ-310/210)
• The optional memory card can save a large amount of measurement data. In addition, Trace 10 is a convenient function to save 10 sets of recent measurement data.
• The statistical processing and GO/NG judgment functions facilitates data management.
• High-speed thermal printer (whose printing speed is approx. 1.5 times that of conventional models) is provided as standard. Printing of measurement results (including judgment results) and assessed profiles are available as well as BAC and ADC profiles. Allows landscape mode printing to match the display on the LCD.

Optional Accessories for SJ-310 Consumables

• Printer paper: Standard type (x5 packs): No.270732
• Printer paper: High-durability type (x5 packs): No.12AAA876
• Protective sheet for the touch panel (x10 sheets): No.12AAN040
• Memory card (4GB): No.12AAL069

*1: Calculation is available only when selecting the VDA, ANSI, or JIS 1982 standard.
*2: Calculation is available only when selecting the ISO 1997 standard.
*3: Calculation is available only when selecting the JIS 2001 standard.
*4: Calculation is available only when selecting the ANSI standard.
*5: Not available when selecting the JIS1982 standard
*6: Please procure the printer for SJ-210 (Code No.: 178-421, Option) separately. Refer to page L-6 for details.
*7: Only the mean value rule is available for the ANSI standard. Only the maximum value and the mean value rules are available for the VDA standard.
*8: Not available when using the AC adapter. Auto sleep can be set to OFF.
*9: For the connection between the calculation display unit and drive unit
To denote your AC line voltage add the following suffixes (e.g. 178-560-01A).
A for 120V, C for 100V, D for 230V, E for 230V (for UK), DC for 220V (for China), K for 220V (for Korea)

Compact type all-in-one surface roughness tester has evolved by meeting customer demands

• Color LCD can display not only calculation results and measurement conditions, but also surface roughness waveforms. In addition, bigger character size contributes to visibility.
  
• Supports a variety of roughness standards. Equipped with a variety of parameters and functions such as arbitrary length measurement. Facilitates the operation and settings using the buttons on the top and inside the openable cover of the main unit. Displays the result after a measurement when the measurement start button is pressed.

• Built-in rechargeable battery allows measurement without the power supply.
• Optional printer for SJ-210 allows the printing of calculation results and measured profiles.
• Outputs the alarm display when the accumulated measurement distance exceeds the threshold level that is set. (Useful for maintaining a stylus-tip replacement policy.)
• Three types of drive unit are available: Standard, Transverse tracing, and Retractable. Selectable depending on the workpiece.

Refer to the Surftest SJ-210 series (Catalog No.E4388) for more details.

• To check the roughness of steel surfaces which have been blast cleaned before painting
• Meets ISO 8503/1
• Rust-proof, made of pure Nickel

Check the PDF

• To check the roughness of steel surfaces which have been blast cleaned before painting
• Meets ISO 8503/1
• Rust-proof, made of pure Nickel

Check the PDF

• To calibrate roughness testers
• Meets ISO 5436-1: 2000
• Rust proof, made of pure Nickel

Check the PDF

• For checking, identifying and specifying the roughness by symbol
• Accuracy: +20% ~ -25%, Ra<0.1µm Accuracy: +12% ~ -17%, Ra>0.1µm
• Meets ISO 2632 (ISR-CS329 meets ISO 8503/1)
• Rust-proof, made of pure Nickel

Check the PDF

• For checking, identifying and specifying the roughness by symbol
• Accuracy: +20% ~ -25%, Ra<0.1µm Accuracy: +12% ~ -17%, Ra>0.1µm
• Meets ISO 2632
• Rust-proof, made of pure Nickel

Check the PDF

• Automatic probe leveling
• Language: English, French, German, Italian, Spanish, Portuguese
• 12 roughness parameters
• Can set tolerance
• Measuring range up to 400µm, can measure grit and shot blasting
• Traverse length up to 16mm
• The probe can be set at 90°or 270°, for transverse measurement
• Memory of maximum 100 results

Check the PDF