Air Gauge Unit – PFL
FEATURES:
    • Every gauge carries a calibration certificate giving actual values
    • Module 1A, Module 2A giving the most economical solution to your inspection needs on shop floor
    • High pressure system: high speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time
    • Non-contact gauging: long life due to minimal frictional wear
    • Two setting Masters: ensures correct magnification of reading at all times
    • System pressure check gauge: provides a constant check on the system pressure i.e. 3 bars (45 psi) regulated by a high precision regulator built into the unit
    • Minimum line pressure required 4.5 bars (67 psi)
    • Air consumption 46 LPM
    • For diameter 6 mm and above Module-1A air gauge unit is to be used
    • For diameter below 6 mm Module-2A air gauge unit is to be used

 

air-gauge-unit-pfl_01 air-gauge-unit-pfl_02

 

Reading Range Graduation Modul
0.0005 mm ±0.020 mm 20-0-20 Mod 1 A
0.001 mm ±0.040 mm 40-0-40 Mod 1 A
0.002 mm ±0.080 mm 80-0-80 Mod 1 A
0.001 mm ±0.020 mm 20-0-20 Mod 2 A
0.00005″ ±0.002″ 2-0-2 Mod 1 A
0.0001″ ±0.004″ 4-0-4 Mod 1 A
0.000025″ ±0.001″ 1-0-1 Mod 1 A

 

Check the PDF