TAPARIA Chisels are:-
• Made from high grade steel,forged and ground.
• Differential heat treatment for cutting edge,and striking end,ensure long life.
• Bright,blue,painted finish.
• Generally Conforming to IS 5663-1970.
OCTAGONAL CHISELS
| PROD. NO. | A | B | C | D | E | WT. GMS |
| 101 | 135 | 9 | 1.50 | 40 | 9 A/F | 58 |
| 102 | 150 | 16 | 3.25 | 70 | 12 A/F | 134 |
| 104 | 200 | 22 | 3.75 | 90 | 16 A/F | 320 |
| 105 | 200 | 25 | 4.00 | 100 | 19 A/F | 365 |
| 106 | 250 | 30 | 4.50 | 120 | 22 A/F | 710 |
| 107 | 300 | 32 | 4.75 | 130 | 22 A/F | 904 |
FLAT CHISELS
Drop forged from high grade carbon steel.Hardened & tempered to ensure best combination of hardness & toughness. Hardness : 55 – 57 HRC on cutting edge. 35 – 45 HRC on striking portion. The body is rounded for comfortable grip. Cutting edges are ground accurately to appropriate angle for metal cutting. Available in 150.0 mm, 200.0 mm,235.0 mm.
| PROD. NO. | A | B | C | D | E | F | WT. GMS |
| 1046 | 150 | 20 | 3.0 | 57 | 17 | 10.00 | 171 |
| 1048 | 200 | 25 | 3.5 | 83 | 21 | 11.00 | 310 |
| 1059 | 235 | 24 | 2.5 | 90 | 24 | 6.35 | 268 |
CHISELS WITH RUBBER GRIP
| PROD. NO. | A | B | C | D | E | F | WT. GMS |
| 106 R | 250 | 30 | 4.5 | 120 | 22 | — | 820 |
| 1059 R | 235 | 24 | 2.5 | 90 | 24 | 6.35 | 350 |
PNEUMATIC CHISELS
| PROD. NO. | A | B | C | ΘD | E | F | G. A/F | H. A/F | WT. GMS |
| 1306 | 150 | 22 | 3.0 | 17.25 | 65 | 46.5 | 14.8 | 19 | 254 |
| 1307 | 175 | 22 | 3.0 | 17.25 | 65 | 46.5 | 14.8 | 19 | 302 |
| 1308 | 200 | 22 | 3.0 | 17.25 | 65 | 46.5 | 14.8 | 19 | 320 |
| 1309 | 225 | 22 | 3.0 | 17.25 | 65 | 46.5 | 14.8 | 19 | 430 |
