The METRIX+ BIT 01P is a digital Barcol Impressor designed for quick, on-site hardness measurements of pure aluminium, soft and thick aluminum alloys, aluminum strips, section bars, castings, forgings, soft metals, copper, brass, rigid plastics, fiber-reinforced plastics (glass steel), and non-reinforced hard plastics. It operates via a needle of specific size that is hard-pressed onto the test sample, measuring the penetration depth to estimate material hardness according to the formula: $\text{HBa} = 100 - h / 0.0076$ (where $h$ is indentation depth, $0.0076$ is a constant, and $\text{HBa}$ is Barcol hardness).
- Ergonomic Design: Easy one-hand operation for rapid on-site testing.
- Balance Positioning: Does not require any external support stands for measurement.
- Statistical Functions: Built-in calculation for Average and Maximum values.
- Scale Conversion: Direct conversion capability to HW, HB, HRF, HV, HRH, HRB, and HRE scales.
- Data Logging: Optional PC interface (USB and software) and Bluetooth connectivity.
- Surface Condition: The sample surface must be smooth, clean, and free from mechanical damage. Light polishing is permissible to eliminate scratches or coatings.
- Thickness: Specimen thickness must be at least 1.5 mm, with no obvious deformation trace on the supporting surface after testing.
- Sample Dimensions: Ensure a minimum distance of at least 3 mm from the pin tip to any edge of the sample.
- Test Spacing: Ensure no previous test indentations are present within 3 mm of the current test point.
- Orientation: The pin must be strictly perpendicular to the sample surface during testing.
- Stability: Test samples must be placed stably on a solid backing (e.g., steel, glass) without tilting, sliding, or undergoing elastic deformation during testing.