Setting Rings for Air Plug Gauge Range 1.5 – 315 mm
FEATURES:
  • Used for setting of pneumatic length measuring instruments
  • Made from oil hardening non shrinking gauge steel, hardened and tempered to 60-62 HRC
  • Subzero treated at -80°C for long term dimensional stability
  • Actual dimensions duly etched
  • Calibrated at 20°C under Standards Room conditions against National/International traceable standards
  • Certificate of calibration is provided along with each master traceable to National/International standards. Certificate under NABL (as per ISO 17025) as per request
  • Manufactured as per DIN2250-1 Type B

setting-rings-for-air-plug-gauge-range-1-5-315-mm_01

setting-rings-for-air-plug-gauge-range-1-5-315-mm_02

ØD1 ØD2 L
ABOVE UPTO & INC.
1.5 2.5 22 6
2.5 5.0 22 10
5.0 10.0 32 12
10.0 15.0 38 14
15.0 20.0 45 16
20.0 25.0 53 18
25.0 32.0 63 20
32.0 40.0 71 24
40.0 50.0 82 32
50.0 60.0 100 32
60.0 70.0 112 32
70.0 80.0 125 32
80.0 90.0 140 32
90.0 100.0 160 32

setting-rings-for-air-plug-gauge-range-1-5-315-mm_03

ØD1 ØD2 ØD3 THICKNESS L3
ABOVE UPTO & INC. L1 L2
100.0 110.0 170 132 36 14 8
110.0 120.0 180 140 36 16 10
120.0 130.0 190 150 36 16 10
130.0 140.0 200 160 36 18 12
140.0 150.0 212 170 36 18 12
150.0 160.0 224 180 36 20 14
160.0 170.0 236 190 40 20 14
170.0 180.0 250 200 40 20 14
180.0 190.0 265 212 40 22 16
190.0 200.0 280 224 45 22 16
200.0 212.0 300 236 45 22 16
212.0 224.0 315 250 45 25 18
224.0 236.0 335 265 50 25 18
236.0 250.0 355 280 50 28 20
250.0 265.0 375 300 50 28 20
265.0 280.0 400 315 56 28 20
280.0 300.0 425 335 56 32 22
300.0 315.0 450 355 56 32 22

 

Check the PDF