TOTEM TUNGSTEN CARBIDE / HSS ROTARY BURRS

TUNGSTEN CARBIDE / HSS ROTARY BURRS

	Standard Cut (Single Cut): This flute structure is designed for superior material removal and general purpose application. These can be used on Steel, Steel alloys, Cast Iron, Stainless Steel, Hard Bronze and Copper. Produces longer chips.
	Supreme Cut (Double Cut/Cross Cut) : This Burr allows for efficient stock removal in the harder materials.Its design reduces tool chatter and breakes the chips into granual shapes.This smaller chips also helps to eliminate loading on the flutes.This design helps to have better control on the burr and grinder.
	Deluxe Cut (Diamond Cut) : This design of tool is like triangular style of point,which produces extremely small chips(powder like chips). This cut eliminates the pulling action of the main cut,and offers the operator good control over the tool and produces excellent finish. Effective in heat treated steels and Tough alloy steels.
	Chip Breaker : In this style there is addition of chip breaker on single spiral flute patterns.There will be a better control on the tool and chips will be broken down. Surface finish may be slightly reduced due to the chip breaker design. Used on all Steel , Cast-Iron , Brass , Bronze and Copper.
	Aluma Cut : Designed for rapid stock removal on non ferrous materials.Recommended to work on Aluminium , Zinc Alloy , Magnesium , Plastic , Hard Rubber and Wood.

                                              Speed Recommendation Chart – Approx. R.P.M. in 1000’s.

Typical shape within each section	Included Angle	Head Dia	Head Length	Overall Length	Shank Dia.	No. of Teeth	Ref. No.
	–	3.80 mm	14.00	50.00	6.00	14.00	C1
	–	5.80 mm	20.00	50.00	6.00	16.00	C2
	–	8 mm	19.00	69.00	6.00	18.00	C3
	–	9.50 mm	19.00	69.00	6.00	20.00	C4
	–	12.70 mm	19.00	69.00	6.00	24.00	C5
	–	16 mm	25.00	75.00	8.00	28.00	C6
	–	12.70 mm	14.00	64.00	6.00	24.00	C7
	–	12.70 mm	25.00	75.00	6.00	24.00	C8
	–	6 mm	20.00	50.00	6.00	16.00	B1
	–	8 mm	19.00	69.00	6.00	18.00	B2
	–	9.50 mm	19.00	69.00	6.00	18.00	B3
	–	12.70 mm	19.00	69.00	6.00	24.00	B4
	–	16 mm	25.00	75.00	8.00	28.00	B5
	–	12.70 mm	25.00	75.00	6.00	24.00	B6
	–	4 mm	19.00	55.00	6.00	12.00	B7
	–	5 mm	19.00	70.00	6.00	14.00	B8
	–	6 mm	19.00	50.00	6.00	14.00	T1
	–	9.50 mm	19.00	69.00	6.00	18.00	T2
	–	12.70 mm	25.00	75.00	6.00	24.00	T3
	–	16 mm	32.00	82.00	8.00	28.00	T4
	–	8 mm	19.00	69.00	6.00	18.00	T5
	–	16 mm	25.00	82.00	8.00	28.00	T6
	–	6 mm	19.00	69.00	6.00	16.00	TB1
	–	9.50 mm	19.00	69.00	6.00	18.00	TB2
	–	12.70 mm	25.00	75.00	6.00	24.00	TB3
	–	16 mm	32.00	82.00	8.00	28.00	TB4
	–	8 mm	19.00	69.00	6.00	16.00	TB5
	17 Deg.	6 mm	19.00	50.00	6.00	14.00	A1
	24 Deg	9.50 mm	20.00	70.00	6.00	18.00	A2
	28 Deg	12.70 mm	25.00	75.00	6.00	20.00	A3
	90 Deg	9.50 mm	9.50	60.00	6.00	20.00	A4
	90 Deg	16 mm	13.00	63.00	6.00	28.00	A5
	60 Deg	16 mm	16.00	66.00	6.00	28.00	A6
	28 Deg	10 mm	18.00	68.00	6.00	20.00	A7
	24 Deg	8 mm	18.00	68.00	6.00	18.00	A8
	31 Deg	16 mm	25.00	75.00	8.00	28.00	A9
	10 Deg	6.20 mm	25.00	75.00	6.00	14.00	A10
	28 Deg	9.50 mm	15.00	65.00	6.00	20.00	A11
	28 Deg	12.70 mm	21.75	71.00	6.00	20.00	A12
	16 Deg	9.50 mm	19.00	69.00	6.00	20.00	K1
	24 Deg	12.70 mm	19.00	69.00	6.00	24.00	K2
	17 Deg	16 mm	33.00	83.00	8.00	24.00	K3
	17 Deg	12.50 mm	30.00	80.00	6.00	20.00	K4
	14 Deg	19 mm	40.00	90.00	8.00	32.00	K5
	14 Deg	9.50 mm	26.00	76.00	6.00	20.00	K6
	14 Deg	12.70 mm	28.00	78.00	6.00	24.00	K7
	14 Deg	16 mm	33.00	83.00	8.00	28.00	K8
	–	8 mm	12.00	62.00	6.00	18.00	O1
	–	12.70 mm	19.00	69.00	6.00	24.00	O2
	–	16 mm	25.00	75.00	8.00	28.00	O3
	–	6.35 mm	10.00	60.00	6.00	14.00	O4
	–	9.50 mm	15.75	65.00	6.00	20.00	O5
	–	12.70 mm	21.75	71.00	6.00	24.00	O6
	–	9.50 mm	2.00	52.00	6.00	20.00	R1
	–	19.10 mm	6.00	56.00	6.00	36.00	R2
	–	12.70 mm	10.00	60.00	6.00	24.00	R3
	–	15 mm	4.00	54.00	6.00	24.00	R4
	–	6.35 mm	—	50.00	6.00	14.00	S1
	–	8 mm	—	50.00	6.00	18.00	S2
	–	9.50 mm	—	60.00	6.00	20.00	S3
	–	12.70 mm	—	62.00	6.00	24.00	S4
	–	16 mm	—	65.00	6.00	28.00	S5
	–	8 mm	—	100.00	6.00	18.00	S6
	–	9.50 mm	25.00	65.00	6.00	18.00	F3
	–	12.70 mm	32.00	80.00	6.00	24.00	F4

Miniature Rotary Burrs
Typical shape within each section	Included Angle	Head Dia	Head Length	Overall Length	Shank Dia.	No. of Teeth	Ref. No.
	–	3 mm	15.90	38.00	3.00	12.00	MC1
	–	6.35 mm	6.35	38.00	3.00	14.00	MC2
	–	6.35 mm	12.70	38.00	3.00	14.00	MC3
	–	3 mm	16.00	38.00	3.00	12.00	MB1
	–	6.35 mm	12.70	38.00	3.00	14.00	MB2
	20 Deg	3 mm	8.00	38.00	3.00	12.00	MA1
	30 Deg	6.35 mm	10.50	38.00	3.00	14.00	MA2
	10 Deg	3 mm	8.50	38.00	3.00	12.00	MA3
	15 Deg	6.35 mm	8.00	38.00	3.00	14.00	MA4
	10 Deg	3 mm	8.00	38.00	3.00	12.00	MK1
	10 Deg	6.35 mm	12.70	38.00	3.00	14.00	MK2
	–	3 mm	16.00	38.00	3.00	12.00	MT
	–	3 mm	16.00	38.00	3.00	12.00	MT2
	–	6.35 mm	10.00	38.00	3.00	14.00	MT3
	–	3 mm	12.70	38.00	3.00	10.00	MT4
	–	4 mm	–	38.00	3.00	12.00	MS1
	–	3 mm	8.00	38.00	3.00	12.00	MO1
	–	6.35 mm	9.50	38.00	3.00	14.00	MO2

HSS Rotary Cutters

Totem HSS rotary cutters are manufactured from 6:5:2 High Speed Steel (M2 Steel) hardened and tempered to RC 60/62 hardness and are extremely useful to Debur soft machine components,Dress and carved out wooden and non ferrous patterns; Fettle aluminium alloys smoothen out ridges of aluminium and die castings remove any material from inaccessible places on soft metals.

Shapes: Cylindrical – for deburring of straight edges and plain surfaces;Ball nose Cylindrical – for non -ferrous gears and wooden/araldite patterns for foundries;Spherical &Countersinking holes respectively;Tree and inverted tree – for spot reomval and general purpose dressing on inside of holes.

Operating Speed : 1100-6000 RPM depending on head diameter of cutter.Shank dia: 6 mm.

Prime Mover : Flexible Grinder.

Special Shapes

Shape	Ref No	Head Dia	Head Length	OAL	No of Teeth
	H 11	15	30	70	20
	H 21	8	29	66	24
	H 22	12	30	70	20
	H 33	12	35	70	24
	H 27	15	7	52	20
	H 43	14	12	70	12

Threaded Ends	Ref No	Head Dia	Head Length	OAL	No of Teeth
	H 51	25	30	M 12	24
	H 52	20	34	M 8	20
	H 53	30	30	M 12	20
	H 54	20	30	M 8	24
	H 55	30	30	M 12	24
	H 56	30	26	M 12	24
	H 57	25	30	M 12	38
	H 58	14	12.7	M 12	24

Check the PDF