Universal Gauge (extension compatible version) standard features: Range 30-250mm internal / 0-215mm external 15mm anvil travel Constant measuring pressure Digital or mechanical readout 150mm and 500mm extensions available. Can be screwed together in multiples (up to maximum 3m recommended) Measuring table and supports available for conversion to bench gauge for the measurement of small components […]
Irregular Spacing Available between 16-300mm diameter to measure between odd spaced lobes. Gun Barrel Head Measurement of smooth bore and rifled bore gun barrels. Major and minor diameters measured deep in to bores. Right Angled Adaptor Blind Bore Standard between 2-6mm and 12.5-300mm. Between 6-12.5mm on request. Slot Width (Large)Slot widths from 6-100mm. Slot […]
Operated by a pneumatic actuator powered by a 3 bar compressed air supply – either from a compressor or a workshop air-line. The measurement data is collected by a capacities probe fitted just behind, and in constant contact with the measuring head. This direct contact ensures high-quality transducer-type accuracy, even at great depths. Measurements are […]
2 Point Spherical Measurement of ovality in bore. Measurement of bores with irregularities. 3 Point Spherical Gives good repeatability even when out of line with bore centre. Available from 6-300mm diameter on digital systems. Spherical Radius Can be supplied as a 2 point (for ovality) or 3 point contact. Available from 6-300mm.
2 and 3 point heads available. Anvils manufactured from tool steel. Between pin, major and minor diameter heads available. Diameters from 8-300mm diameter (5/16″-12″).
For sizes from 2-300mm diameter. Interchangeable with standard heads Suits Bowers XTD, XTH and Ultima Special forms, radius, ball contacts Depth stops available for quick location Annular grooves possible Grooves For Size from 2-300 diameter
To measure effective (functional) diameter, pitch diameter, major diameter, between M4 – 300mm. / No. 8 UN – 12″ diameter. Ball Screw Threads External Threads
The Bowers XT500 large diameter 3-point bore-gauge has been designed specifically for the measurement of internal diameters between 300 and 500mm. The newly designed constant-force digital readout ensures that the measuring pressure remains constant throughout the measurement whilst radiussed measuring anvils provide optimum centralisation in the part. Anvil sets are supplied in 25mm steps (300-325, […]
The new MicroGauge Two point bore gauge system has been designed specifically for the measurement of small bores between 1.0-10.0mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and format as a ballpoint pen […]
Bowers’ Bluetooth digital internal micrometers offer a new ergonomic design – including a larger and clearer LCD display – along with IP67 electronics protection, proximity output; allowing bi-directional communication giving greater flexibility for data acquisition and storage. The extended mechanical travel of the XT range means that special heads can also be manufactured to accommodate […]
Bowers XT Analogue three Point Mechanical Bore Gauges are an economical solution to accurate shop-floor bore measurement. The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. Their wide application range, 2-300mm, rugged construction and easy read scale, ensure both accuracy and ease of use. […]