• High contrast LCD
  • Operating and display unit (bezel) can be rotated through 280°
  • Immediate measurements due to the Reference System
  • Lifter protection cap on the measuring spindle
  • Mounting shank and measuring spindle are both made of hardened stainless steel
             

Technical data

Order no. Product type Measuring span in mm Measuring span (inches) Resolution Resolution inches Graduation value mm Graduation value inch Range of analog display mm Range of analog display inches Error limit (mm) Repeatability mm Standard Measuring force (N) IP protection category Height of digits
4337660
1087 R
12.5 mm
.5″
0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
.00002″ / .00005″ / .0001″ / .0002″ / .0005″
0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05
.00005″ / .0001” / .0002” / .0005″ / .001″ / .002″
± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2
± .0004″ / ± .001” / ± .002″ / ± .004″ / ± .01”
0.004 mm
0.001 mm
Factory standard
0.65 – 0.9
IP 42
8.5 mm
4337661
1087 R
25 mm
1″
0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
.00002″ / .00005″ / .0001″ / .0002″ / .0005″
0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05
.00005″ / .0001” / .0002” / .0005″ / .001″ / .002″
± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2
± .0004″ / ± .001” / ± .002″ / ± .004″ / ± .01”
0.004 mm
0.001 mm
Factory standard
0.65 – 1.15
IP 42
8.5 mm
4337666
1087 R
50 mm
2″
0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
.00002″ / .00005″ / .0001″ / .0002″ / .0005″
0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05
.00005″ / .0001” / .0002” / .0005″ / .001″ / .002″
± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2
± .0004″ / ± .001” / ± .002″ / ± .004″ / ± .01”
0.007 mm
0.001 mm
Factory standard
1.25 – 2.7
IP 42
8.5 mm
4337670
1087 ZR
12.5 mm
.5″
0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
.00002″ / .00005″ / .0001″ / .0002″ / .0005″
0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05
.00005″ / .0001” / .0002” / .0005″ / .001″ / .002″
± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2
± .0004″ / ± .001” / ± .002″ / ± .004″ / ± .01”
0.004 mm
0.001 mm
Factory standard
0.65 – 0.9
IP 42
8.5 mm
4337671
1087 ZR
25 mm
1″
0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
.00002″ / .00005″ / .0001″ / .0002″ / .0005″
0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05
.00005″ / .0001” / .0002” / .0005″ / .001″ / .002″
± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2
± .0004″ / ± .001” / ± .002″ / ± .004″ / ± .01”
0.004 mm
0.001 mm
Factory standard
0.65 – 1.15
IP 42
8.5 mm

Functions

  • ON/OFF
  • RESET (set display to zero)
  • mm/inch
  • Reversal of counting direction
  • PRESET (for entering a numerical value)
  • TOL (enter tolerance limit values)
  • MAX/MIN memory for searching the reversal point
  • TIR (MAX-MIN) for testing flatness and concentricity
  • ABS (display can be set to zero without losing reference to preset)
  • DATA (data transmission via connection cable)
  • Factor (adjustable)
  • LOCK (individual button lock)