• High contrast LCD
  • Analog display with 4 mm pointer ensures better visual recognition, ideal when checking concentricity or flatness as well as searching for the reversal point when measuring bores
  • Operating and display unit (bezel) can be rotated through 280°
  • Mounting shank and measuring spindle are both made of hardened stainless steel
  • Measuring spindle is mounted in a high precision ball guide for minimal hysteresis
  • Linearized inductive absolute measuring system
  • Measuring force spring is interchangeable
  • Lower stop is adjustable
 
         

Technical data

Order no. Product type Measuring range mm Measuring range inch Measuring range 1 _beginning_ mm Measuring range 1 _end mm Measuring range 1 _beginning_inch Measuring range 1 _end inch Resolution Resolution Standard Minimum measuring force Maximum measuring force Height of digits Range of analog display mm Range of analog display inches IP protection category
4346000
2000
± 0.9
± .035″
-0.4 mm
0.4 mm
-0.015 inch
0.015 inch
0.001 mm / 0.001 mm / 0 mm
0 inch / 0 inch / 0 inch
Factory standard
0.7 N
0.9 N
6.5 mm
± 0,030 / ± 0,015 / ± 0,006
± .0015″ / ± .0006″ / ± .0003”
IP 54
4346900
2000
± 0.9
± .035″
-0.4 mm
0.4 mm
-0.015 inch
0.015 inch
0.001 mm / 0.001 mm / 0 mm
0 inch / 0 inch / 0 inch
Factory standard
0.7 N
0.9 N
6.5 mm
± 0,030 / ± 0,015 / ± 0,006
± .0015″ / ± .0006″ / ± .0003”
IP 54

Functions

  • ON/OFF
  • RESET (set display to zero)
  • 0 (set the analog display to zero)
  • PRESET (for entering a numerical value)
  • mm/inch
  • Reversal of counting direction
  • RANGE (switch the measuring range and resolution)
  • ABS (display can be set to zero without losing reference to preset)