Thickness Gauges Archives - Page 5 of 6

Rugged, forged steel frame with heat insulators
Measuring spindle is mounted in long guideway with lever controlled retraction
Measuring spindle and anvil are made of hardened stainless steel with carbide tipped measuring faces
Adjustable centering stop for surface centering
Anvil spindle can easily be fine adjusted
Constant measuring force as a result of built-in spring, eliminating user influence
Maximum wear resistance due to non-contact positioning in conjunction with carbide tipped measuring faces

Order no.	Product type	Application range mm	Measuring span in mm	Parallel error in µm	Flatness in µm	Repeatability fw (µm)	Measuring force
4450000	840 F	0 – 25	2 mm	1 µm	0.2 µm	0.5 µm	7.5 N
4450001	840 F	25 – 60	2 mm	2 µm	0.2 µm	0.5 µm	7.5 N
4450002	840 F	50 – 100	2.5 mm	2 µm	0.2 µm	1 µm	7.5 N
4450003	840 F	100 – 150	2.5 mm	2 µm	0.2 µm	1 µm	9 N
4450004	840 F	150 – 200	2.5 mm	2 µm	0.2 µm	1 µm	9 N

Code	range	Accuracy
2168-12	0-12.7mm/0-0.5″	±0.03mm

DIGITAL SNAP GAUGE CODE – 2163

Code	Thickness range	Tube all thickness range
2163-25	0-25mm/0-1″	0-2mm/0.08″

DIGITAL SNAP GAUGE CODE – 2166

Code	Range	Resolution	Accuracy
2166-12	0-12mm/0-0.5″	0.01mm/0.0005″	±0.03mm

DIGITAL SNAP GAGE CODE – 2167

Code	Range	Resolution	Accuracy
2167-25	0-25mm/0-1″	0.01mm/0.0005″	±0.03mm

DIGITAL SNAP GAGE CODE – 1163

Buttons: on/off, zero, mm/inch
Automatic power off, move the digital unit to turn on power
Battery CR2032
Data output
Made of stainless steel
Optional accessory: data output system(code7306-20/20B, 7302-SPC1A/SPC1B,7305-SPC2)

Code	range	Resolution	Accuracy
1163-50A	0-50mm/0-2″	0.01mm/0.0005″	±0.03mm

DIGITAL 3-PURPOSE SNAP GAGE CODE – 2164

Code	range	Resolution	Accuracy
2164-25	0-25mm/0-1″	0.01mm/0.0005″	±0.03mm

For quick Go/No-Go judgment of diameter of cylinders and shafts
Anvil retracting stroke: 3mm
Measuring force: 6-9N
Carbide measuring faces
Optional accessory: dial indicators (graduation 0.01mm), digital indicators (resolution 0.01mm/0.0005″)

For quick Go/No-Go judgment of diameter of cylinders and shafts
Anvil retracting stroke: 3mm
Measuring force: 6-9N
Carbide measuring faces
Front edges of anvils are chamfered for easy workpiece insertion
Optional accessory: dial indicators (graduation 0.01mm), digital indicators (resolution 0.01mm/0.0005″)