We are offering a qualitative range of Cast Iron Bench Center that are accurate, precise and offer quick method for inspecting radial run out of camshafts, crankshafts and cylindrical shafts etc. Manufactured as per IS: 5980-1978, these cast iron bench center are utilized in machine shops, tool rooms and standard rooms for checking various parameters such as concentricity, Straightness and True rotation of components. Bench centers manufactured at our works are made up of close grained cast iron and finished to higher degree of accuracy by hand scrapping.

cast iron bench center

 

Sizes mm
(L x B)
Centre
Distance
mm
Centre
Height
mm
Co-axiality
of centres micron (um)
Parallellism of the
axis of the centre
with respect to guide ways.
300 X 125 300 125 10 lOum/300 mm
300 X 160 300 160 10 lOum/300 mm
500 X 160 500 160 15 lOum/300 mm
500 X 200 500 200 15 15 um/300 mm
750 X 160 750 160 20 lOum/300 mm
750 X 200 750 200 40 15 um/300 mm
1000 X 160 1000 160 20 lOum/300 mm
1000 X 200 1000 200 40 15 um/300 mm
1250 X 160 1250 160 20 lOum/300 mm
1250 X 200 1250 200 40 15 um/300 mm
1500 X 160 1500 160 20 lOum/300 mm
1500 X 200 1500 200 40 15 um/300 mm
2000 X 200 2000 200 40 15 um/300 mm
2000 X 250 2000 250 40 15 um/300 mm
2500 X 250 2500 250 40 15 um/300 mm
2500 X 300 2500 300 40 15 um/300 mm
2500 X 500 2500 500 60 20um/300 mm
  • Centers are made from high carbon steel hardened and ground finish, having morse taper MT-3 and are replaceable.
  • Can provide fabricated stand with levelling screws on request. The overall working height of surface plate with stand and levelling screw will be 900 mm (approx), from floor level

 

Some of the salient features of our Bench Centers are:

  • The base of bench centers and its heads are artificially stress relieved as precaution against distortion.
  • One of the center is spring loaded to ensure uniform pressure while holding and easy loading and unloading of work piece without disturbing the accuracy.
  • Centers are made from high carbon steel hardened and ground finish, having morse taper MT-3 and are replaceable.
  • Both heads are adjustable for easy and quick setting of the required distance between the centers.
  • The heavy duty bed is provided with two T-Slots, parallel to each other.
  • Bench centers are supplied with computerized calibration certificate traceable to National Physical Laboratory (NPL, Govt of India) New Delhi.