• Magnetic v blocks used for Grinding, light Milling, Drilling & Inspection of
    Round & Square Jobs.
  • Accuracy for Flatness, Squareness and Parallelism within 0.005mm upto 150mml & 0.010 mm for 200 mm L of 11V 11 block
  • The Bigger V angle & bottom holding surface are equipped with hardened strips for wear resistance.
  • Uniform and strong magnetic pull to all three magnetic surfaces Top, Bottom & Vface
  • Hardness of Vface is 60±2 Re.
  • Magnetic v blocks with easy ON- OFF facility.
  • 1200 11 V II angle also available.

 

MAGNETIC V BLOCKS

 

Cat No. Size Range (mm) Pull
UL-10101 Soft 40L X 40W X 50H [2″] ¢ 3 -¢ 25 25 Kg
UL-10101 Hard 40L X 40W X 50H [2″] ¢ 3 -¢ 25 25 Kg
UL-10102 Soft 75L X 56W X 75H [3″] ¢5-¢40 75 Kg
UL-10102 Hard 75L X 56W X 75H [3″] ¢5-¢40 75 Kg
UL-10103 Soft lOOL X 70W X 95H [4″] ¢ 5 -¢ 65 100 Kg
UL-10103 Hard lOOL X 70W X 95H [4″] ¢ 5 -¢ 65 125 Kg
UL-10104 Soft 150L X 75W X 100H [6″] ¢ 5-¢ 70 125 Kg
UL-10104 Hard 150L X 75W X 100H [6″] ¢ 5-¢ 70 150 Kg
UL-10105 Soft 200L X 125W X 150H [8″] ¢ 10-¢ 140 175 Kg
UL-10105 Hard 200L X 125W X 150H [8″] ¢ 10-¢ 140 175 Kg