• Dial indicators with a large-diameter dial face for easy reading.
  • Models with longer measuring ranges are also available.
  • All types are supplied with limit markers and a bezel clamp as standard.
  • Both the stem and the spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
  • The bezel clamp and lifting lever (optional)*1 can be attached to either the right or left side. These parts can be easily installed and removed without tools.
    *1: Can be attached only to Code No. 3046S, 3047S, 3050S, 3109S-10 and 4046S.

Large Diameter Dial Indicators

DIMENSIONS

Large Diameter Dial Indicators

Order No. A B C D E F G H I
3046S 61.2 75.5 78 17.7 21 15.9 20.6 71 9
3047S 61.2 75.5 78 17.7 21 15.9 20.6 71 9
3050S 52.6 94 78 17.7 21 25.9 29.1 71 9
3052S-19* 72.9 104.3 78 17.7 21 25.9 39.4 71 9
3058S-19* 81.9 142.3 78 17.7 21 43.9 59.4 71 9
3060S-19* 120.9 202.3 78 17.7 21 73.9 89.4 71 9
3062S-19* 141.9 243.3 78 17.7 21 94.9 109.4 71 9
3109S-10 61.2 79 78 17.7 21 25.9 14.1 71 9
4046S 61.2 84 92 21.5 21 18.9 19.1 71 9

Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8″ dia. and #4-48UNF thread mount for the contact point.
* The shoulder on a contact point (standard accessory) acts as a stop to prevent spindle overrun that may otherwise damage the indicator. For this reason, if you need to install an optional contact point with an outside diameter smaller than 7mm, use a washer (with outside diameter of at least 7mm, inside diameter of 3mm, and thickness of approx. 0.5mm) placed between the contact point and the spindle.

Order No. A B C D E F G H I
3414S 52.6 73.4 78 17.7 19 12.6 21.8 71 9
3415S 52.6 73.4 78 17.7 19 12.6 21.8 71 9
3416S 52.6 86.1 78 17.7 19 12.6 34.5 71 9
3417S 52.6 86.1 78 17.7 19 12.6 34.5 71 9
3424S-19* 84 149.3 78 17.7 19 50.6 59.7 71 9
3426S-19* 123 198.1 78 17.7 19 73.9 85.2 71 9
3428S-19* 144 244.5 78 17.7 19 94.9 110.6 71 9
3803S-10 61.2 59.7 78 17.7 19 12.6 8.1 71 9
3802S-10 61.2 59.7 78 17.7 19 12.6 8.1 71 9
3052S-11* 72.9 102.4 78 17.7 19 25.9 37.5 71 9
3058S-11* 81.9 147.1 78 17.7 19 50.6 57.5 71 9
4887S-19* 123 198.1 92 21.5 19 66.9 85.2 71 9

SPECIFICATIONS
Metric

Order No. Graduation Range (range/rev) Accuracy Repeat- ability Dial reading Measuring force
w/ lug Flat-back Overall Retrace 1/10 Rev 1 Rev
3046S 3046SB 0.01mm 10mm (1mm) 15µm 3µm 5µm 10µm 3µm ±0-100 1.4N or less
3047S 3047SB 0.01mm 10mm (1mm) 15µm 3µm 5µm 10µm 3µm 0-50-0 1.4N or less
3050S 3050SB 0.01mm 20mm (1mm) 20µm 5µm 8µm 15µm 4µm ±0-100 2.0N or less
3052S-19 3052SB-19 0.01mm 30mm (1mm) 25µm 7µm 10µm 15µm 5µm ±0-100 2.5N or less
3058S-19 3058SB-19 0.01mm 50mm (1mm) 30µm 8µm 10µm 15µm 5µm ±0-100 3.0N or less
3060S-19* 3060SB-19* 0.01mm 80mm (1mm) 45µm 9µm 12µm 20µm 5µm ±0-100 3.0N or less
3062S-19* 3062SB-19* 0.01mm 100mm (1mm) 50µm 9µm 12µm 20µm 5µm ±0-100 3.2N or less
3109S-10 3109SB-10 0.001mm 1mm (0.2mm) 5µm 2µm 2µm 4µm 0.5µm 0-100-0 1.5N or less
4046S 4046SB 0.01mm 10mm (1mm) 15µm 3µm 5µm 10µm 3µm ±0-100 1.4N or less

*1 Use in a vertical position (contact point downward) for the long stroke model.
*2 Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

Inch

Order No. Graduation Range (range/rev) Accuracy Repeat- ability Dial reading Measuring force
w/ lug Flat-back First 1 Rev / 2.5 Rev / 10 Rev Retrace
3414S 3414SB .001” .5” (.1”) ±.001” / ±.001” / ±.001” .0002” ±.0002” ±0-100 1.8N or less
3415S 3415SB .001” .5” (.1”) ±.001” / ±.001” / ±.001” .0002” ±.0002” 0-50-0 1.8N or less
3416S 3416SB .001” 1” (.1”) ±.001” / ±.001” / ±.002” .0002” ±.0002” ±0-100 1.8N or less
3417S 3417SB .001” 1” (.1”) ±.001” / ±.001” / ±.002” .0002” ±.0002” 0-50-0 1.8N or less
3424S-19 3424SB-19 .001” 2” (.1”) ±.001” / ±.001” / ±.002” / ±.003” (20Rev) .00033” ±.0002” ±0-100 3.0N or less
3426S-19* 3426SB-19* .001” 3” (.1”)

±.001” / ±.001” / ±.002” / ±.003”

(20Rev) / ±.005” (Over 20Rev)

.00033” ±.0002” ±0-100 3.0N or less
3428S-19* 3428SB-19* .001” 4” (.1”)

±.001” / ±.001” / ±.002” / ±.003”

(20Rev) / ±.005” (Over 20Rev)

.00033” ±.0002” ±0-100 3.2N or less
3802S-10 3802SB-10 .0001” .025” (.01”) ±.0001” / ±.0001” / — .0001” ±.00003” 0-10 2.0N or less
3803S-10 3803SB-10 .0001” .025” (.01”) ±.0001” / ±.0001” / — .0001” ±.00003” 0-5-0 2.0N or less
4887S-19* 4887SB-19* .001” 3” (.1”)

±.001” / ±.001” / ±.002” / ±.003”

(20Rev) / ±.005” (Over 20Rev)

.00033” ±.0002 ±0-100 3.0N or less

*1 Use in a vertical position (contact point downward) for the long stroke model.
*2 Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed

FEATURES
Metric

Large Diameter Dial Indicators

Inch

Large Diameter Dial Indicators