AUTHOR RATEUSERS RATE (0)
TOTEM TUNGSTEN CARBIDE / HSS ROTARY BURRS

TUNGSTEN CARBIDE / HSS ROTARY BURRS Standard Cut (Single Cut): This flute structure is designed for superior material removal and general purpose application. These can be used on Steel, Steel alloys, Cast Iron, Stainless Steel, Hard Bronze and Copper. Produces longer chips. Supreme Cut (Double Cut/Cross Cut) : This Burr allows for efficient stock removal […]

AUTHOR RATEUSERS RATE (0)
CARBON STEEL HAND TAPS

CARBON STEEL HAND TAPS General Purpose Application ‘Totem’ range of Carbon Alloy Steel taps are known worldwide for their excellent quality. We are one of the largest producer of Carbon Taps around the world. We export more than 50% of our total production. We also do contract manufacturing for some of the very well known […]

AUTHOR RATEUSERS RATE (0)
HEXAGONAL DIE NUTS

HEXAGONAL DIE NUTS HSS & Carbon Steel Hexagonal Dies External Threading Application The Dies are offered in Carbon Alloy and High Speed Steel. We have large manufacturing facility to produce both round as well as hexagonal Dies. We offer very versatile range staring from 13/16” to 4” OD. Available in HSS / Carbon Steel Range: […]

AUTHOR RATEUSERS RATE (0)
ROUND SPLIT DIES

ROUND SPLIT DIES HSS & Carbon Steel Round Dies External Threading Application The Dies are offered in Carbon Alloy and High Speed Steel. We have large manufacturing facility to produce both round as well as hexagonal Dies. We offer very versatile range staring from 13/16” to 4” OD. ROUND DIES Available in HSS / Carbon […]

AUTHOR RATEUSERS RATE (0)
HSS HAND TAPS

HSS HAND TAPS     These are straight flute general purpose taps which can be used for both machine or hand tapping. They are generally the most economical tool for use on production runs, but are best on materials that produce chips, or where the swarf breaks readily. Where deep holes are to be tapped, […]

AUTHOR RATEUSERS RATE (0)
FORMING TAPS – SD SERIES

FORMING TAPS – SD SERIES   Forming Otherwise known as ‘Roll’, ‘Fluteless’ or Polygon taps. Used for the chipless production of threads in ductile materials such as copper, aluminium, soft brass or steel. Threads produced by fluteless taps are formed by plastic deformation, they are not cut. These taps do not have flute or cutting […]

AUTHOR RATEUSERS RATE (0)
STRAIGHT FLUTE TAPS – SC SERIES

STRAIGHT FLUTE TAPS – SC SERIES   Straight flute taps dimensionally same as hand taps & with a lead chamfer of 1.1/2 threads. The flute & rake angle are designed as per application. These Taps are recommended for tapping on grey cast iron, S G iron & steel. The chips produced are short or powder […]

AUTHOR RATEUSERS RATE (0)
SPIRAL FLUTE TAPS – SB

SPIRAL FLUTE TAPS – SB SPIRAL FLUTE – These taps are used to produce a thread close to the bottom of a blind hole and therefore have a very short lead. The right hand spiral cut of the flutes acts to force the swarf away from the cutting teeth to the rear of the flutes […]

AUTHOR RATEUSERS RATE (0)
SPIRAL POINTED TAP – SA

SPIRAL POINTED TAP – SA SPIRAL POINT is also known as ‘gun nose’ or ‘bull nose’ or chipdriver. These taps are dimensionally the same as a hand tap, second lead, but have the cutting face ground back relative to the axis of the tap, for the lead portion. This gives the flute a better cutting […]

Gokul Traders Copyright © 2010-18 Developed by Shades Of Web. All rights reserved.