- High contrast LCD
- Operating and display unit (bezel) can be rotated through 280°
- Immediate measurements due to the Reference System
- Mounting shank and measuring spindle are both made of hardened stainless steel
- Protection cap on the end of measuring spindle
 |
 |
 |
 |
 |
 |
 |
Technical data
| Order no. | Product type | Measuring span in mm | Measuring span (inches) | Resolution | Resolution inches | Graduation value mm | Graduation value inch | Range of analog display mm | Range of analog display inches | Error limit (mm) | Repeatability mm | Standard | Measuring force (N) | IP protection category | Height of digits |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4337662 |
1087 BR
|
12.5 mm
|
.5″
|
0.001 mm / 0.001 mm / 0.002 mm / 0.005 mm / 0.01 mm
|
.00002″ / .00005″ / .0001″ / .0002″ / .0005″
|
0,001 / 0,002 / 0,005 / 0,01 / 0,02 / 0,05
|
.00005″ / .0001” / .0002” / .0005″ / .001″ / .002″
|
± 0,01 / ± 0,02 / ± 0,04 / ± 0,1 / ± 0,2
|
± .0004″ / ± .001” / ± .002″ / ± .004″ / ± .01”
|
0.004 mm
|
0.001 mm
|
Factory standard
|
0.65 – 0.9
|
IP 42
|
8.5 mm
|
Functions
- ON/OFF
- RESET (set display to zero)
- mm/inch
- PRESET (for entering a numerical value)
- Reversal of counting direction
- TOL (enter tolerance limit values)
- START/STOP search for reversal point
- MAX/MIN memory for searching the reversal point
- ABS (display can be set to zero without losing reference to preset)
- 0 (set the analog display to zero)
- DATA (data transmission via connection cable)
- Factor (adjustable)
