AUTHOR RATE
1-2-3 BLOCKS WITH 1 HOLE

Used for accurate mounting & quick setting during Inspection, tool setting & machining. Made from alloy steel material. Hardnedd 60 ± 2 Rc. Accuracy for Parallelism & Squareness within 0.005mm, M8 tapped hole provided at centre.   Sr. No. Art No. Size (MM) 1 293.01 75 L X 50 W X 25 T  

AUTHOR RATE
ANGLE BLOCKS

Used for accurate & quick angle setting during Inspection, tool setting & machining. Made from special quality alloy steel material. Hardness 60± 2 Rc.   Sr. No. Art No. Size (MM) Angle 1 292.01 75 W X 75 H X 8T 45° & 90° 2 292.02 50 W X 85 H X 8T 30° & […]

AUTHOR RATE
PARALLEL BLOCKS (Sizes are nominal)

Used for accurate supporting of jobs Made from special quality alloy steel material. Hardness 60± 2 Rc. Accuracy for parallelism, Squreness & flatness is 0.005mm upto 200mm L& 0.010mm upto 450mm L Special sizes can also be manufactured.   Sr. No. Art No. Size (MM) 1 289.01 100 L X 10 W X 5 H […]

AUTHOR RATE
MAGNETIC BALANCING WEIGHT

Used for balancing purpose. Compact design. Strong Rare Earth magnets. One side magnetic face. Weight is engraved   Sr. No. Art No. Capacity 1 252.01 5 gms -2 kg  

AUTHOR RATE
MAGNETIC HOLDFAST

Used for lifting holding & locating of ferrous parts. The Jack- off screw also serves as a handle. Eye bolt for lifting. Special sizes can also be manufactured.   Sr. No. Art No. Size (MM) Pull 1 270.01 0 45 x 45 H 30 Kg 2 270.02 0 55 x 50 H 40 Kg 3 […]

AUTHOR RATE
BUTTON MAGNET

BUTTON MAGNET Used for lifting holding & locatig of rerrous parts. Compact design with very strong magnetic pull. Special sizes can also be manufactured. Sr. No. Art No. Size (MM) Pull 1 269.01 0 12 x 10 H 3 Kg 2 269.02 0 20 x 12 H 5 Kg 3 269.03 0 25 x 25 […]

AUTHOR RATE
POT MAGENT

POT MAGENT Used for lifting holding & locating of ferrous parts. Compact design with very strong magnetic pull. Tapped hole on rear of magnetic face for lifting arrangement. Special sizes can also be manufacturred. Sr. No. Art No. Size (MM) Tapping Pull 1 268.01 0 18 x 16 H M6 5 Kg 2 268.02 0 […]

AUTHOR RATE
DIAMOND DRESSER

DIAMOND DRESSER Small & compact size Easy holding of the diamond dresser. To be used on grinding machine with magnetic chuck. Hardened & ground. Sr. No. Art No. Size (MM) Price (Rs.) 1 2120.01 70 L X 70 W X 50 H 740 Each  

AUTHOR RATE
MAGNETIC DIAMOND DRESSER HOLDER

Small & compact size Powerful holding of the magnet on the machine table. Easy holding of the diamond dresser.   Sr. No. Art No. Size (MM) Magnetic Pull 1 2119.01 80 L X 50 W X 70 H 70 Kg

AUTHOR RATE
MAGNETIC HOLDER

Used for holding flat & round jobs during inspection, Grinding and Welding. Accuracy for Flatness, Squareness & paralleslism within 0.005mm. ON-OFF is done by rotation of handle. Provides angle reference of 45°, 90° and 120°. Strong magnetic pull on all ground portions. Hardened strips provided on all working surfaces in hard blocks for wear resistance. […]

AUTHOR RATE
MAGNETIC RECTANGULAR BLOCKS

Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs. Accuracy for Parallelism is within ±0.005mm. Provided with ON-OFF switch except for 1″ block. Supplied in perfect matched pair. Harden Strips provided in hard pair. Sr. No. Art No. Size (MM) 1 206.01 Soft 25 L X 25 W X 25 H […]

AUTHOR RATE
MAGNETIC V

Used for Grinding, Light Milling, Drilling & Inspection of Round & Sqare Jobs. Accuracy for Flatness, Squareness and Parallelism within 0.005mm. Uniform magnetic pull along with Easy On-Off facility. Supplied in perfectly matched pair. The working surface of Hand “V” block is equipped with hardened strips for wear resistance. Sr. No. Art No. Size (MM) […]

AUTHOR RATE
B (BALL) BLOCKS with clamp

B (BALL) BLOCKS with clamp Used for Checking of heavy round & cylindrical jobs. Supplied in perfectly matched pair having accuracy 0.005mm. Four hard steel balls on top face provides self-aligning, hard wearing, accurate support. Total contact area as compared to V block is more. Ball wearing is even , so accuracy doesn’t get affected. […]

AUTHOR RATE
ROLLER BEARING V

ROLLER BEARING V Used for checking heavy and odd shaped round jobs. Perfectly matched pair having accuracy 0.005mm. Included angle of rollers is 90°. Standard bearing are used which are replaceable. Jobs don’t get damaged due to bearing on top. special sizes suitable for different diameter can also be manufactured. Sr. No. Art No. Size […]

AUTHOR RATE
HARDENED & GROUND V” BLOCKS WITH CLAMP

HARDENED & GROUND V” BLOCKS WITH CLAMP Used for Grinding, Light Milling, Drilling & Inspection of Round & Square jobs. Accuracy ±0.005mm. Hardness 60±2 Rc. Supplied in perfect matched pair Top angle 120° Bottom angle 90° Suitable for checking of lobbing. Sturdy clamps clamps for better clamping of the job Sr. No. Art No. Size […]

AUTHOR RATE
HARDENED & GROUND V” BLOCKS

HARDENED & GROUND V” BLOCKS Used for Grinding. Light Milling, Drilling & Ispection of Round & Square Jobs. Accuracy for Flatness, Squareness and Parallelism within±0.005mm. Tenon slot(16×3) at bottom can be used for clamping on machine bed. Hardness 60±2 Rc. Entire top of V is accessible due to unique design. Supplied in perfect matched pair. […]

AUTHOR RATE
HARDENED & GROUND TOOL-ROOM V” BLOCK

HARDENED & GROUND TOOL-ROOM V” BLOCK Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs. Accuracy for Flatness, Squareness and Parallelism within ± 0.003mm. it can be used on the base, ends & sides. Hardness 60±2 Rc & supplied in perfect matched pair. Sturdy clamps for better clamping fo jobs. End […]

AUTHOR RATE
HARDENED & GROUND “V” BLOCKS 2

HARDENED & GROUND “V” BLOCKS 2 Used for Grinding, Light Milling, Drilling & Inspection of Round & Sqare Jobs. Accuracy for Flatness, Sqareness and Parallesim within 0.005mm. it can be used on the base, ends & sides. Hardness 60±2 Rc & supply in pefect matched pair. Clamps has tapping holes at 45° & 90° for […]

AUTHOR RATE
HARDENED & GROUND TOOL-ROOM V” BLOCK

Used for Grinding. Light Milling, Drilling & Inspection of Round & Sqare Jobs. Accuracy for Flatness, Squareness and Parallesim within ±0.005mm. Can be used on its base, the ends & on either side. Hardness 60±2 Rc. M 10 tapping at base M8 tapping on side for clamping on angle plate or face plate or on […]

AUTHOR RATE
ELONGATED V” BLOCKS

Used by Griding, Light Milling, Drilling & Inspection of Round & Square Jobs. Hardness 60±2 Rc. Supplied with clamps Supplied in perfect matched pair.   Sr. No. Art No. Size (MM) 1 213.01 160 L X 50 W X 35 H 2 213.02 200 L X 63 W X 50 H 3 213.03 300 L […]

AUTHOR RATE
UNIVERSAL V” BLOCK

UNIVERSAL V” BLOCK Used for Grinding. Light Milling, Drilling & Inspection of Round & Square Jobs. Grade A – made from alloy steel material & Hardness is 60±2 Rc. Grade B – made from hard cast iron & scrapped. Four different 90° V opening to suit various sizes. Supplied in perfect matched pair. Also available […]

AUTHOR RATE
HARDENED & GROUND “V” BLOCK WITH CLAMP

HARDENED & GROUND “V” BLOCK WITH CLAMP Used for Grinding, Light Milling, Drilling & Inspection of Round & Square jobs. Hardness 60±2 Rc. Supplied in perfect mathced pair. End face grinding, square with sides can be possible. Two 90° “v” angle for differnt capacities. Special sizes can also be manufactured. Supplied with Clamp. 300 x 300 x […]

AUTHOR RATE
HARDENED & GROUND V” BLOCKS

HARDENED & GROUND V BLOCKS Used for Grinding. Light Milling, Drilling & Inspection of Round & Square Jobs. Accuracy for Flatness, Squareness and Parallelism within ±0.005mm. Hardness 60 ±2 Rc. Supplied in perfect matched pair. Supplied with clamp which can be used from both sides to suit job dimensions. Holds & Clamps the heavy jobs […]

AUTHOR RATE
HARDENED & GROUND V BLOCKS

Used for supporting of round and square jobs during Light machining. Grinding, Drilling & Inspection. Accuracy for Flatness, Squareness and parallelism within ±0.003mm. Hardness 60±2 Rc. Supplied in perfect matched pair. Supplied with clamp. Can also be used for end face. side face and right angle Grinding   Sr. No. Art No. Size (MM) Range (MM) […]

AUTHOR RATE
LEAKPROOF MAGNETIC “V” BLOCKS

Used for clamping of round and flat jobs during EDM operations. Light maching, Grinding or Drilling & inspection. Accuracy for Flatness, Squareness & Parallelism within 0.005mm. upto 120L & 0.010mm. upto 170L of ‘V’ Block Uniform magnetc pull Three magnetic surfaces Top, Bottom & V faces. Hardness of V face is 60 ± 2 Rc. […]

AUTHOR RATE
HARDENED & GROUND MAGNETIC V BLOCK

All Sides are hardened & ground. Used for grinding, light Milling, Drillling & inspection of round & square jobs. Accuracy for Flatness, squareness & paralleslism within 0.005mm upto 159L & 0.010mm for 200L Hardness above 60 Rc. Suppilied in matched Pair. Uniform and Strong magnetic pull to all three magnetic surfaces, Top, Bottom and V […]

AUTHOR RATE
MAGNETIC ‘V’ BLOCK

Used for Grinding, Light Milling, Drilling & Inspection of Round & Square jobs. Accuracy for Flatness, Squareness and Parallelism within 0.005mm upto 150 mm Length & 0.010 mm for 200 mm Length of “V”block The bigger V angle & bottom holding surface are equipped with hardened strips for wear resistance. Uniform and strong magnetic pull to […]

Gokul Traders Copyright © 2010-18 Developed by Shades Of Web. All rights reserved.