INSIZE DIGITAL SURFACE PROFILE GAGE (CODE – 2843-10)

Code:

▪Measure peak-to-valley height of blast cleaned surface.
▪If the profile is too low, the adhesion of the coating to the surface will be reduced.
▪If the profile is too high, there is the danger that the profile peaks will remain uncoated, allowing rust spots to occur.
▪Meet ASTM D 4417-B
▪Zero set block is included, set zero before measurement
▪Button function: on/off, zero, mm/inch, absolute/incremental measurement
▪CR2032 battery, automatic power off (time is adjustable)
▪Data output
▪Stainless steel base
▪Optional accessory: data output cable (code 7315-50M)

Click to Expand

INSIZE DIGITAL SURFACE PROFILE GAGE (CODE – 2843-10)

Product Overview

The INSIZE Digital Surface Profile Gage (Code 2843-10) is a precision instrument designed to measure the peak-to-valley height of blast-cleaned surfaces. It ensures surface profile compliance with ASTM D 4417-B standards, which is critical for maintaining proper coating adhesion and preventing premature rust formation caused by uncoated surface peaks.

Key Features & Capabilities

Measurement Standard: Conforms to ASTM D 4417-B.
Zero Calibration: Includes a dedicated zero set block for calibration prior to measurement.
Digital Interface: Features on/off, zero, mm/inch conversion, and absolute/incremental measurement modes.
Power Management: Powered by a CR2032 battery with an adjustable automatic power-off function.
Data Connectivity: Equipped with data output capabilities.
Construction: Features a durable stainless steel base.
Optional Accessories: Compatible with data output cable (Code 7315-50M).

Technical Specifications

Parameter	Specification
Code	2843-10
Range	0-12.7mm / 0-0.5"
Digital Indicator Stroke	12.7mm / 0.5"
Digital Indicator Resolution	0.001mm / 0.00005"
Accuracy	±0.005mm