CP Light Duty Tools with Multi Cutting Edge Blades

CP LIGHT DUTY TOOLS WITH MULTI-CUTTING EDGE BLADES

CP Light Duty Tools with Multi-Cutting Edge Blades are precision deburring tools designed for smooth finishing of metal and plastic components. Equipped with multiple cutting edges, they ensure longer tool life and consistent performance by allowing use of alternate edges when one wears out. Ideal for light-duty applications, these tools provide efficient burr removal, chamfering, and edge finishing with minimal effort. CP LIGHT DUTY TOOLS WITH STD. BLADES

ET-1 (38030)
CG-1 (38114)
DT-52-SD (34522)

Download Catalog

ET-1 (38030)

Material	Material: Handle – Metal Body with Soft Sleeve; Blade – HSS (M2 Grade)
Blade Hardness	62-64 HRC
Dimension in mm	L = 177, Handle Ø = 12, End Cap Ø = 18
Packaging	Card Box
Pack Qty.	1
Packing Wt. in gms	53

CG-1 (38114)

Material	Material: Handle – Polyacetal Handle with Rubber Grip; Blade – HSS (M2 Grade)
Blade Hardness	62-64 HRC
Dimension in mm	L = 114, Handle Ø = 19.8, End Cap Ø = 21.7
Packaging	Card Box
Pack Qty.	1
Packing Wt. in gms	37

DT-5(2)-SD (34522)

Material	Material: Handle – Polyacetal; Holder – Steel; Blade – HSS (M2 Grade)
Blade Hardness	62-64 HRC
Dimension in mm	L = 148 min, 213 max; Handle Ø = 23.7, End Cap Ø = 24
Packaging	Card Box
Pack Qty.	1
Packing Wt. in gms	94

ET-1 (38030)

Metallic handle with soft grip and Ball end cap.
Holds the Ø2.6mm P-1 blade.
Works best on metals forming spiral chips such as Steel, Aluminum and Copper. Can also be used on all other metals (hardness<35 HRC) and plastics.
Laser marked for easy identification purpose.
For right hand users only.

CG-1 (38114)

Poly Acetal Body Handle with Soft Grip & Ball End Cap.
Holds the Ø2.6mm P-1 blade.
Works best on metals forming spiral chips such as Steel, Aluminum and Copper. Can also be used on all other metals (hardness<35 HRC) and plastics.
Laser marked for easy identification purpose.
For right hand users only.

DT-5(2)-SD (34522)

Poly Acetal Body T-SD (Yellow/Black) Handle with Telescopic Holder DT(P) & Ball End Cap.
Holds the Ø2.6mm P-1 & P-2 Blades.
P-1 blade works best on metals forming spiral chips such as Steel, Aluminum and Copper whereas P-2 blade is suitable for metals forming brittle burr such as Cast Iron, Brass. Both the blades can also be used on other metals (hardness<35 HRC) and plastics.
Collet Action ensures firm locking of Plain Surface Holders.
For right and left hand users only.

CP LIGHT DUTY TOOLS WITH MULTI-CUTTING EDGE BLADES

SCREW JACK WITH STEEL BODY

Mitutoyo-Series 317, 117 — Interchangeable Anvil Type-”Uni-Mike”

Mitutoyo-SERIES 568 – ABSOLUTE Digimatic Snap-Open Bore Gages-ABSOLUTE Borematic

MITUTOYO SERIES 324 DIGITAL GEAR TOOTH MICROMETER WITH INTERCHANGEABLE BALL ANVIL/ SPINDLE TIP TYPE

Mitutoyo-SERIES 573-Absolute Snap Caliper

NITYO NI – 6611 | STRAIGHT SCREWDRIVER RPM 2000 TORQUE 3 NM

INSIZE INTERNAL DIAL CALIPER GAGE (CODE – 2321)

MILLIMESS 1002 MECHANICAL DIAL COMPARATOR

MITUTOYO SERIES 314-3 FLUTES V-ANVIL MICROMETERS

ADJUSTABLE HEIGHT PLATE

CP LIGHT DUTY TOOLS WITH MULTI-CUTTING EDGE BLADES

Related Products

Other Products