DT-3 (New) (33066)

• Classical Design Poly Acetal ‘D’ Handle with Ball catch lock for blade holding & Space for Blade Storage.
• Includes ‘D’ Handle with 3 Nos. 3.2mm Ø Blades:- C-10, C-20 & C-15.
• C-10 blade is suitable for Steel, Aluminum and Copper. C-20 blade is suited for Cast Iron, Brass whereas C-15 blade works best on Stainless Steel. These blades can also be used on all other metals (hardness<35 HRC) and plastics.
• Laser marked for easy identification purpose.

DT-2 (5) Set (86059)

• 5 Nos. of Aluminum 3/8″ Hex Powder coated handle with interchangeable C-10(12100) blade.
• Works best on metals forming spiral chips such as Steel, Aluminum and Copper. Can also be used on all other metals (hardness<35 HRC) and plastics.
• Laser marked for easy identification purpose.
• For right hand users only.

DT-2 (5) Set (31014)

• 10 Nos. of Aluminum 8mm Hex Powder coated handle with Pocket Clip and C-10 (12100) blade.
• Works best on metals forming spiral chips such as Steel, Aluminum and Copper. Can also be used on all other metals (hardness<35 HRC) and plastics.
• Laser marked for easy identification purpose.
• For right hand users

DT-2 (M)-SD (34034)

• Poly Acetal Body D-SD (Yellow/Black) Handle with Ball End Cap and Metallic Blade holder.
• Includes Handle ‘D-SD’ with 3 nos. 3.2mm Ø Blades – C-10, C-20 & C-15.
• C-10 blade is suitable for Steel, Aluminum and Copper. C-20 blade is suited for Cast Iron, Brass whereas C-15 blade works best on Stainless Steel. These blades can also be used on all other metals (hardness<35 HRC) and plastics.
• Laser marked for easy identification purpose.

DT-5-SD (34054)

• Poly Acetal Body T-SD (Yellow/Black) Handle with Telescopic Holder DT(C) & Ball End Cap.
• Holds the Ø3.2mm C-10, C-20, C-15, C-30 and C-10(C) blades. Ideal to use on metals such as Steel, Aluminum, Copper, C.I, Brass and Stainless Steel and hardened metals. Both the blades can also be used on other metals (hardness<35 HRC) and plastics.
• Collet Action ensures firm grip of Plain Surface holder which can be telescoped to reach at depth.
• Laser marked for easy identification purpose.

ET-2 (38040)

• Metallic handle with soft grip and Ball end cap.
• Holds the Ø3.2mm C-10 blade.
• Works best on metals forming spiral chips such as Steel, Aluminum and Copper. Can also be used on all other metals (hardness<35 HRC) and plastics.
• Laser marked for easy identification purpose.
• For right hand users only.

CG-2 (38124)

• Poly Acetal Body Handle with Soft Grip & Ball End Cap.
• Holds the Ø3.2mm C-10 blade. Spring loaded collet action for Blade holding.
• Works best on metals forming spiral chips such as Steel, Aluminum and Copper. Can also be used on all other metals (hardness<35 HRC) and plastics.
• Laser marked for easy identification purpose.
• For right hand users only.

DT-SD (3-in-1) Set (86319)

• Included contents:- Handle – R-SD (Yellow/Black); Holders – SD-C, SD-P; Deburring Blades – R-15(S), C-10, C-20, C-15, P-1, P-2 & P-3
• Suitable for deburring on Steel, Aluminum and Copper, Cast Iron, Brass, Stainless Steel etc. Can also be used on all other metals (hardness<35 HRC) and plastics.
•  All inclusive ‘Deburring Tool with Blade’ Set to fulfill all your Deburring needs.

Promo Set 1 (84050)

Promo Set 2 (84060)

• Included contents:- Handle ‘D-SD’ handle (1 Nos.); Deburring Blades : C-10 (2 Nos.), C-20 (2 Nos.), C-101 (2 Nos.), C-30(1 Nos.), C-15(1 Nos.), C-101(1 Nos.) & C-10(C) (1 Nos.)
• Suitable for deburring on Steel, Aluminum and Copper, Cast Iron & Brass, Stainless Steel etc. Can also be used on all other metals (hardness<35 HRC) and plastics.
• Deburring Set with Polyacetal handle and 10 Universal Deburring Blades