Imada offers manual or motorized push/pull testers in vertical or horizontal configurations. Lever-operated manual systems enable rapid push/pull testing up to 220 lbf. Wheel-operated manual systems enable slower, more precise movement with the hand wheel up to 750 lbf.
Motorized push/pull testers offer the most control and highest degree of repeatability with the ability to set a constant test speed and range of movement up to 1100 lbf. All push/pull testers can be configured with a digital force gauge with data output for analysis by data acquisition software. An optional digital distance meter to measure displacement is available.

Wine Cork Pull Tester

with Digital Force Gauge

Standard Features

WCP Standard Features

• Heavy-duty metal construction
• Maximum load 110 lbf (50 kgf)
• Stroke: 2.3″ (60mm) per 170°
• Selectable lbf, kgf, and N units
• RS-232C, Digimatic and analog outputs
• Overload capacity 200% F.S.
• Overload alarm, display flashes at overload limit
• Runs on internal NI-MH batteries or AC adapter
• Push-button tare function

WCP-2 Additional Features

• EL electro luminescent display is highly visible in dark locations
• Programmable High/Low setpoints with color coded LED indicators
• Multi-language program menus: English, Spanish, French, Chinese, German, Italian, Korean, Japanese
• 1,000 data memory for recall or download

WCP Ranges (Resolution)

Accuracy: ±0.2% F.S. ±1 LSD

Lever-Operated Vertical Pull Tester

NLV-220 Lever-Operated Vertical Test Stand

DS2 Force Gauge

• NLV-220-T vertical test stand
• DS2 Digital Force gauge (choice of range)
• GT-30 Vise Chuck or WG-300 Cam Grip (your choice)
• WG-1 or WG-2 Grip (your choice)
• Max Load: 220 lbf
• DS2 has an outstanding accuracy of ±0.2%
• Real time and peak mode (selectable)
• Newton, lbf and kgf units are selectable
• RS-232C, Digimatic and analog outputs

This digital pull tester is for checking the pull-off force values of electrical leads, crimped terminals, connectors, and soldered parts. System consists of test stand and DS2 force gauge of your choice. Choose optional pull test attachments wedge grip, cam grip, vise chuck, WG-1 or WG-2 wire grip to suit your application (other attachments available).

Lever-Operated Horizontal Pull Tester

NLH-220 Lever-Operated Horizontal Test Stand

DS2 Force Gauge

• Horizontal test stand
• DS2 Digital Force Gauge (specify range)
• Crimp Test Attachments:
  Stand side: specify GT-30 Vise Chuck or WG-300 Cam Grip
  Gauge side: specify WG-1, WG-2, WG-3 or KC-100 Grip
• Max Load: 220 lbf
• Outstanding accuracy of ±0.2%
• Real time and peak mode (selectable)
• Newton, lb and kg units are selectable
• RS-232C, Digimatic and analog outputs

The Lever-Operated Horizontal Pull Tester is designed to check the pull-off force values of electrical leads, crimped terminals, connectors, and all other pull tests. Each system comes with test stand and DS2 force gauge of your choice. Choose optional pull test attachments wedge grip, cam grip, vise chuck, WG-1 or WG-2 wire grip to suit your application (attachments for other applications are available).

Motorized Pull Tester

Pull Tester – Motorized with Output

• Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
• Wide speed range: 0.4 – 11.5 in/min (optional speed ranges available)
• Max clearance 9″ (with extender 14″)
• No programming required
• Newton, lbf and kgf units are selectable
• Accuracy: ±0.2% F.S. ±1 LSD
• RS-232C, Digimatic and analog outputs

Motorized pull testers are designed to check the pull-off force values of electrical leads, crimped terminals and connectors and ensure consistent results by controlling force and speed. The system is configured with a motorized test stand and Imada DS2 or ZT force gauge in the range of your choice and attachments; cam grip, vise chuck, WG-1, WG-2, WG-3 or KC-100 grip to suit your application. Data acquisition software is available as well as attachments for other applications. WG-1 is perfect for pull testing crimp on terminals. Set the opening size by turning the wingnut until jaws contact sample, then back off a little until the sample slides into the jaws from the side. Then you can simply slide the next sample into the jaws when you are ready to test. WG-2 grips the actual wire or sample tested with serrated jaws. Ideal for a variety of shapes. WG-3 multi terminal grip has 12 wire gauge apertures on the turret. Locate the appropriate size, lock in position and you’re ready to test. The KC-100 spring- loaded wedge grip is ideal for tensile measurements of thick materials (up to 10mm thick). The serrated jaw is 15mm wide.

MH-220AC-S-TL Optical Fiber Pull Tester

Optical Fiber Pull Tester

Specification