Mitutoyo-SERIES 2 - Standard Type, 0.01mm Graduation-Dial Indicators

MITUTOYO-SERIES 2 – STANDARD TYPE, 0.01MM GRADUATION-DIAL INDICATORS

Standard 0.01mm graduation dial gages having a bezel with an outside diameter of 57mm. All types come with limit markers and a bezel clamp as standard. The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools. Secure adhesion

SPECIFICATIONS

Metric

Order No.		Graduation	Range (range/rev)	Accuracy				Repeat- ability	Dial reading	Measuring force
w/ lug	Flat-back	Graduation	Range (range/rev)	Overall	Retrace	1/10 Rev	1 Rev	Repeat- ability	Dial reading	Measuring force
2046S	2046SB	0.01mm	10mm (1mm)	13µm	3µm	5µm	10µm	3µm	±0-100	1.4N or less
2046S-09	2046SB-09	0.01mm	10mm (1mm)	15µm	3µm	5µm	10µm	3µm	±0-100	1.4N or less
2047S	2047SB	0.01mm	10mm (1mm)	13µm	3µm	5µm	10µm	3µm	0-50-0	1.4N or less
2902S	2902SB	0.01mm	10mm (1mm)	13µm	3µm	5µm	10µm	3µm	100-0	1.4N or less
2310S-10	2310SB-10	0.01mm	10mm (1mm)	15µm	3µm	5µm	10µm	3µm	±0-100	1.4N or less
2044S	2044SB	0.01mm	5mm (1mm)	12µm	3µm	5µm	10µm	3µm	±0-100	1.4N or less
2044S-09	2044SB-09	0.01mm	5mm (1mm)	12µm	3µm	5µm	10µm	3µm	±0-100	1.4N or less
2045S	2045SB	0.01mm	5mm (1mm)	12µm	3µm	5µm	10µm	3µm	0-50-0	1.4N or less

* Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed.

Standard Type Dial Indicators

DIMENSIONS

Standard Type Dial Indicators

Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/ JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8″ dia. and #4-48UNF thread mount for the contact point.

Order No.	A	B	C	D	E	F	G	H	I
2046S	48.8	65.2	57	17.7	20	16.9	19.8	52	7.6
2046S-09	48.8	65.2	57	17.7	20	16.9	19.8	52	7.6
2047S	48.8	65.2	57	17.7	20	16.9	19.8	52	7.6
2902S	48.8	65.2	57	17.7	20	16.9	19.8	52	7.6
2310S-10	48.8	65.2	57	17.7	20	16.9	19.8	52	7.6
2044S	48.8	65.2	57	17.7	20	16.9	19.8	52	7.6
2044S-09	48.8	65.2	57	17.7	20	16.9	19.8	52	7.6
2045S	48.8	65.2	57	17.7	20	16.9	19.8	52	7.6

Standard 0.01mm graduation dial gages having a bezel with an outside diameter of 57mm. All types come with limit markers and a bezel clamp as standard.
The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
Secure adhesion between the bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
The spindle is made of high-strength quenchhardened stainless steel suitable for heavyduty use.
A carbide contact point is used.
The grand gear is made of stainless steel with high resistance to wear and deformation.
Application of a hard coating on the surface of the crystal makes the gage highly scratchand chemical-resistant.

Standard Type Dial Indicators