INSIZE Ultrasonic Thickness Gage ISU-800D

INSIZE ULTRASONIC THICKNESS GAGE ADVANCED TYPE (CODE ISU-800D)

Real-time temperature compensation eliminates the error caused by temperature variation Support both single element transducers and dual element transducers Measure the thickness of substrate through coating Measuring mode: standard mode (dual element transducer: P-E mode, single element transducer: I-E mode), penetrate coating mode (dual element transducer: I-E mode, single element transducer: E-E mode or auto mode) Measure method: single point, scanning, deviation Set upper and lower limits for alarm when out-of-tolerance Single point and 2 points calibration Keyboard lock function avoids parameter setting change caused by unintended press during measurement Memory 1000 measurement values Data can be transferred to PC by Bluetooth connection or Mini-USB cable

Download Catalog

Specification

Measuring range	refer to the specification of transducers
Resolution	0.01mm/0.001 mm
Accuracy	refer to the specification of transducers
Data output	bluetooth and USB
Velocity	1~19999m/s
Power supply	3.7V rechargeable lithium battery
Dimension	157×78×37mm
Weight	260g

Specification of Transducers (on steel)

Code	Type	Freq	Diameter (Ød)	Measuring range	Min. Size of pipes (diameter x wall thickness)	Accuracy	Application temperature	Application
ISU-S15-P06 (included)	Single element	15MHz	8mm	I-E: 0.9~28mm E~E: 0.15~14mm	Ø10×1.5mm Ø15×0.35mm	±0.02mm/0.3%H* (take the larger one)	-10~60°C	high precision or thin workpieces
ISU-S15-P06-CB (optional)**	–	–	5mm	I-E: 0.9~10mm E~E: 0.15~5mm	Ø10×1.5mm Ø15×0.35mm			high precision or ireegular workpieces
ISU-S15-P06-CB1 (optional)**	–	–	8mm	I-E: 0.9~38mm E~E: 0.3~19mm	–			high precision or thick workpieces
ISU-S2M-P14 (optional)	Single element	2MHz	19mm	I-E: 30~2000mm E~E: 30~1000mm	–	±0.5%H*	-10~310°C	Ultra-thick workpieces
ISU-G5M-P10 (optional)	dual element	5MHz	13mm	0.8~300mm	Ø25x3mm	±0.04mm (range: <10mm) ±H/333m*(range: >10mm)	-10~60°C	Normal workpieces
ISU-G5M-P08 (optional)	dual element	5MHz	11mm	0.8~225mm	Ø20×1.2mm			Curved surface or normal workpieces
ISU-G7M-P06 (optional)	dual element	7.5MHz	9mm	0.8~50mm	Ø15×1.2mm			Curved surface or small workpieces
ISU-G2M-P12 (optional)	dual element	2MHz	17mm	3~700mm	Ø30x4mm	±0.05mm/0.5%H* (take the larger one)		Castings and thick workspieces
ISU-H3M-P12 (optional)	dual element	3MHz	15mm	2~200mm	Ø25x3mm	±0.05mm/0.5%H (take the larger one)	-10~310°C	workspieces with high temperature

**H is the measured thickness in mm

**Delay blockers, suitable for transducer ISU-S15-P06

Real-time temperature compensation eliminates the error caused by temperature variation
Support both single element transducers and dual element transducers
Measure the thickness of substrate through coating
Measuring mode: standard mode (dual element transducer:
P-E mode, single element transducer: I-E mode), penetrate coating mode (dual element transducer: I-E mode, single element transducer: E-E mode or auto mode)
Measure method: single point, scanning, deviation
Set upper and lower limits for alarm when out-of-tolerance
Single point and 2 points calibration
Keyboard lock function avoids parameter setting change caused by unintended press during measurement
Memory 1000 measurement values
Data can be transferred to PC by Bluetooth connection or Mini-USB cable