Mitutoyo-SERIES 568 - ABSOLUTE Digimatic Snap-Open Bore Gages-ABSOLUTE Borematic

MITUTOYO-SERIES 568 – ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES-ABSOLUTE BOREMATIC

A snap-type digital display, inside-diameter measuring instrument allows quick and easy measurement with lever operation. Titanium-coated measuring pins provide excellent durability and impact resistance and allow the instrument to measure right to the bottom of a blind hole. Three-Point contact measuring head enables highly repeatable measurement data to be obtained. The ABSOLUTE linear encoder eliminates overspeed errors. GO/NO-GO

SPECIFICATIONS

Metric individual

Order No.	Range*2	Accuracy*1	Mass	Accessories (optional)*2
Order No.	Range*2	Accuracy*1	Mass	Extension Rod	SPC cable
568-361	6 – 8mm	±5µm (within 5µm)	480g	952322 (100mm)	905338 (1mm) 905409 (2mm)
568-362	8 – 10mm		485g
568-363	10 – 12mm		485g
568-364	12 – 16mm		475g	952621 (150mm)
568-365	16 – 20mm		480g	952621 (150mm)
568-366	20 – 25mm	±6µm (within 6µm)	540g	952622 (150mm)
568-367	25 – 30mm		555g
568-368	30 – 40mm		565g
568-369	40 – 50mm		610g
568-370	50 – 63mm		730g	952623 (150mm)
568-371	62 – 75mm		740g
568-372	75 – 88mm		790g
568-373	87 – 100mm		800g
568-374	100 – 113mm		900g
568-375	112 – 125mm		910g

Inch/Metric individual

Order No.	Range*2	Accuracy*1	Mass	Extension Rod (optional)*2
Order No.	Range*2	Accuracy*1	Mass	Extension Rod	SPC cable
568-461	.275″- .35″	±.00025″ (within .00025”)	480g	952322 (100mm)	905338 (1mm) 905409 (2mm)
568-462	.35″- .425″		485g
568-463	.425″- .5″		485g
568-464	.5″- .65″		475g	952621 (150mm)
568-465	.65″- .8″		480g	952621 (150mm)
568-466	.8″- 1″	±.0003″ (within .0003”)	540g	952622 (150mm)
568-467	1″- 1.2″		555g
568-468	1.2″- 1.6″		565g
568-469	1.6″- 2″		610g
568-470	2″- 2.5″		730g	952623 (150mm)
568-471	2.5″- 3″		740g
568-472	3″- 3.5″		790g
568-473	3.5″- 4″		800g
568-474	4″- 4.5″		900g
568-475	4.5″- 5″		910g

* 1 Excluding quantizing error
Instrumental error excluding quantizing error (maximum error)
*2 The measurement range cannot be enlarged by measuring heads that are not standard-supplied (the accuracy is not guaranteed).
Note: Setting rings are optional.

DIMENSIONS

Borematic

Range	L₂	L₁
6 – 8, 8 – 10, 10 – 12 mm	83	284
12 – 16, 16 – 20 mm	53	255
20 – 25, 25 – 30mm	59	261
30 – 40, 40 – 50mm	67	269
50 – 63, 62 – 75, 75 – 88, 87 – 100, 100 – 113, 112 – 125mm	75	277

External appearance differs depending on the measuring range.

Technical Data
Resolution: 0.001mm or .00005″/0.001mm Display: LCD
Response speed: Infinite Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory) Battery life: Approx. 5,000 hours in continuous use
Scale type: Electrostatic capacitance type absolute encoder

Functions
GO/NO-GO judgment GO/NO-GO judgment zoom 2-Point Preset
Zero-setting
Data hold, Error alarm
Low battery voltage alert
Data output
Function Lock
330° rotary display
inch/mm conversion (inch/mm models)

For details of Custom-ordered Products, refer to page C-49.

Optional accessories
Refer to page A-21 for details
USB Input Tool Direct (2m): 06ADV380F Connecting cables for U-WAVE-T For standard (160mm): 02AZD790F For foot switch: 02AZE140F

A snap-type digital display, inside-diameter measuring instrument allows quick and easy measurement with lever operation.
Titanium-coated measuring pins provide excellent durability and impact resistance and allow the instrument to measure right to the bottom of a blind hole.
Three-Point contact measuring head enables highly repeatable measurement data to be obtained.
The ABSOLUTE linear encoder eliminates overspeed errors.
GO/NO-GO judgment function.
Dual HOLD function buttons, optimally located, enable high operability.
330-degree rotatable display unit for easy reading at any angle.
Measurement can be made close to the bottom of a blind hole.

Range (mm) L₃ (mm) L₄ (mm) L₅ (mm)

6 – 12 2 or below — 2.5

12 – 20

0.3 or below
5.6 3.5

20 – 30 8.3 5.2

30 – 50 13.0 10

50 – 125 17.0 14
Can measure deep holes by attaching an optional extension rod.
Digimatic output port enables inclusion in a statistical process control or networked measurement (Refer to page A-3 for details.)
Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as (Refer to page A-5 for details.)
Interchangeable-Head Bore Gages are available in part sets and full
For details of Setting rings, refer to page C-47.

Range (mm)	L₃ (mm)	L₄ (mm)	L₅ (mm)
6 – 12	2 or below	—	2.5
12 – 20	0.3 or below	5.6	3.5
20 – 30	8.3	5.2
30 – 50	13.0	10
50 – 125	17.0	14

Borematic

Large LCD
Character height of 11mm (1.5 times the character area of conventional 8.5mm products)

Borematic

Three large buttons
The three large-button design employed by ID-N/ID-B, the ABSOLUTE coolant proof Digimatic indicators, enables easier and simpler operation.