GO/±NG judgment function: If a judgment result shows an out of tolerance condition, the display backlighting changes from green to red. An analog bar indicator has been integrated to make upper/lower limit and turnover point reading more comfortable. With Mitutoyo’s ABSOLUTE Linear Encoder technology, once the measurement reference point has been set it will not […]
This new-generation digital indicator offers the excellent accuracy and functionality expected from the top class of indicator. Take advantage of its high accuracy backed up by 0.5μm/.00002” resolution, remote control functionality via a handheld controller (or an RS-232C interface) and easy runout measurements with the well-established analog bar display. Functionality meets the needs of diverse […]
General purpose indicator with the measuring range of 25.4mm/ 1”. Cost-effective and user-friendly type which is equipped with the basic functions necessary. The ABS (absolute) sensor restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors. Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-18. […]
Enables a tolerance judgment to be output to external equipment for a measurement result against user-defined limits. Solid-state switching provides high reliability by avoiding metallic switch contacts. Output is enabled by directly connecting to external devices (sequencers, etc., for which a logical invert is available if required). The measurement and judgment results are displayed on the LCD. The […]
Calculation function operates on spindle displacement. Entering the appropriate formula factors for a fixture dedicated to the application enables direct measurement readout, thereby eliminating any need for the conversion tables previously needed for those applications where fixtures are typically used. Peak-Value Run-out/MAX/MIN Hold enables GO/±NG judgement for peak value. Simple operation of many functions with five buttons and […]
Dedicated to inside measurement with minimum-value Hold and tolerance judgement functions. Measurement data memory function (9 measurement results can be stored) Simple operation of many functions with five buttons and status icons. Wide LCD and new analog bar graph are now standard on all models. Sampling is performed fifty times per second for accurate detection of maximum and […]
Run-out/MAX/MIN Hold function enables GO/±NG judgement for peak or difference values. Simple operation of many functions with five buttons and status icons. Wide LCD and new analog bar graph are now standard on all models. Sampling is performed fifty times per second for accurate detection of maximum and minimum values. SPECIFICATIONS Metric Order No.(w/lug, flat-back) Range Resolution Accuracy*1 Hysteresis*1 […]
Our unique ABS sensor restores the last origin position automatically when the indicator is turned on. The chance of overspeed errors has been eliminated thanks to the ABS sensor. Rated to IP66: can be used satisfactorily even in adverse environments where the indicator is subject to splashing by cutting fluid or coolant. Slim body design […]
The ABS (absolute) sensor restores the last origin position automatically when the indicator is turned on. Note: Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-18. Thanks to Mitutoyo’s ABSOLUTE Linear Encoder, reliability has been increased due to elimination of over-speed errors. Tolerance-judging measurement is available by setting upper and lower […]
Solar powered An environmentally friendly measuring instrument that does not require batteries, eliminating the hassle and cost of battery replacement. Can operate under minimum light conditions of 40 lux—lower than the level in a warehouse. Built-in recharger The large-capacity built-in reservoir capacitor allows you to use the indicator for long periods of time under light conditions below the […]
MARCATOR 1087 BRI DIGITAL INDICATOR Integrated wireless transmitter High-contrast LCD display Operating and display unit (bezel) can be rotated through 280° Lifter protection cap on the measuring spindle Clamping shaft and measuring pin made of hardened stainless steel Immediate measurements due to the Reference System Technical data Order no. […]
High contrast LCD Operating and display unit (bezel) can be rotated through 280° Immediate measurements due to the Reference System Mounting shank and measuring spindle are both made of hardened stainless steel Protection cap on the end of measuring spindle Technical data Order no. Product type Measuring span in mm […]
Technical data Order no. Product type Measuring span in mm Measuring span (inches) Resolution Resolution inches Graduation value mm Graduation value inch Range of analog display mm Range of analog display inches Error limit (mm) Repeatability mm Standard Measuring force (N) IP protection category Height of digits 4337663 1087 […]
High contrast LCD Operating and display unit (bezel) can be rotated through 280° Immediate measurements due to the Reference System Lifter protection cap on the measuring spindle Mounting shank and measuring spindle are both made of hardened stainless steel Technical data Order no. Product type Measuring span in […]
MARCATOR 1086 RI DIGITAL INDICATOR Integrated wireless transmitter High contrast LCD Operating and display unit (bezel) can be rotated through 280° Mounting shank and measuring spindle are both made of hardened stainless steel Immediate measurements due to the Reference System Technical data Order no. Product type Measuring span in […]
MARCATOR 1086 ZR DIGITAL INDICATOR High contrast LCD Operating and display unit (bezel) can be rotated through 280° Lifter protection cap on the measuring spindle Mounting shank and measuring spindle are both made of hardened stainless steel Immediate measurements due to the Reference System Technical Data Order no. Product type […]
High contrast LCD Hermetically sealed protective measuring spindle cap Mounting shank and measuring spindle are both made of hardened stainless steel Technical Data Order no. Product type Measuring span in mm Measuring span (inches) Resolution Resolution inches Error limit (mm) Standard Measuring force (N) IP protection category Height of […]
VALUE LINE SERIES FEATURES: Strong construction Large Digits for better viewing Display Resolution 0.01 mm & 0.0005 Inch Zero setting With Calibration certificate Useful functions : mm / Inch Preset Reference Manual / Auto power off CODE V1 V2 V3 Reading 0.001 mm 0.001 mm 0.001 mm Reading 0.0005 Inch 0.0005 Inch 0.0005 […]