DI-12 Breakaway Torque Tester

Model: DI-12-SL
Automatic Breakaway Torque Tester
breakaway torque tester-di-12 breakaway torque tester-di-12-application


DI-12-SL Ranges (Resolution)
Accuracy: ±1% F.S., 1LSD
Model   Capacity   Approx. RPM Recommended Thread Sizes
  lbf-in kgf-cm N-m    
DI-12-SL4 0.30 – 35.00 0.30 – 40.00 0.030 – 4.000 N-m 0.7 #6~#10 (M3~M5)
DI-12-SL15 3.0 – 130.0 3.0 – 150.0 0.30 – 15.00 N-m 0.7 #10~5/16″ (M5~M8)
Standard Features
DI-12 Standard Features
  • Selectable units: lbf-in, kgf-cm, N-m units available
  • Breakaway, Peak and Real Time measuring modes (selectable)
  • USB virtual COM port sends 80 data/second or peak data
  • Both CW and CCW operation
DI-12-SL Specifications
Display 4 digit LCD display
Operation Both CW and CCW motorized rotation
Measurement Modes PP: Displays PEAK Torque value that will not change until a higher value is measured.
TR: Displays TRANSIENT torque values.
PD: Determines breakaway and yield torque (CW only) If a breakaway torque value is detected, the green indicator will light, and tester rotation will stop automatically.
Output Virtual RS-232 (9600 bps): PP 1 peak data, PD 80 data/sec.
Auto-power-off After 5 minutes of non-use.
Dimensions Detector: 44mm diameter × 190mm length, 1/4″ hex drive Indicator: 87mm W × 108mm D × 33mm H