AUTHOR RATE
Mitutoyo-Optional Accessories for Dial Test Indicators-Styli, Stems and Holders

Styli (for Metric Models Only*) * Except for universal type dial test indicator (513-304G). Stylus length affects the scale factor of an indicator. The styli provided as standard give a scale factor of unity. ø0.5mm ball-point 190547 (L=14.7mm) 190549 (L=20.9mm) 190654 (L=22.3mm) 190656 (L=44.5mm) ø0.7mm ball-point 190548 (L=14.7mm) 190550 (L=20.9mm) 190653 (L=22.3mm) 190655 (L=44.5mm) ø1mm […]

AUTHOR RATE
Mitutoyo-SERIES 513-Pocket Type Dial Test Indicator

Jeweled bearings assure higher sensitivity and accuracy. Pocket Type Dial Test Indicator can be mounted by clamping the stem or the body (except for 513-517WE and 513-517WT). Reversible measuring direction (Clutch type). Two holding bars are supplied. (Full sets only.) Fully adjustable bezel/dial face. Stylus is adjustable within 220°. Bezel is sealed with on O-ring […]

AUTHOR RATE
Mitutoyo-SERIES 513 – Universal Type-Dial Test Indicator

Universal application to all directions. (Not only the direction of the measuring point, but also the direction of measurement itself can be adjusted 360 degrees without moving the indicator.) SPECIFICATIONS DIMENSIONS Set Configuration: Metric Set Configuration: Inch Optional Accessories ––––––: Swivel clamps (See page F-63.) ––––––: Holding bars (See page F-63.) ––––––: Stems (See page F-63.) 102824: Stylus, […]

AUTHOR RATE
Mitutoyo-SERIES 513 – Horizontal (20° Tilted Face), Vertical, and Parallel Types-Dial Test Indicator

Specially designed for easy viewing of dial. The dial face obliquely faces upward, allowing users to read the graduations from the user’s side. It is convenient when probing on the side of a large workpiece and the workbench is high. Using the universal holder allows easy hole centering. The dial face always faces upward when […]

AUTHOR RATE
Mitutoyo-SERIES 513 – Lever-Type Dial Indicators-Dial Test Indicators

Designed to probe surfaces that cannot be reached with a normal dial gauge. Useful both for alignment and for measurement purposes. Mitutoyo’s proprietary new design permits smooth pointer operation. Strong frame provides excellent rigidity and durability. Non-magnetic pointer and contact point permit reliable operation even in magnetic environments. Clear and concise wide dial face allows […]

AUTHOR RATE
Mitutoyo-SERIES 1-Back Plunger Type Dial Indicator

Back plunger type dial gauges are suitable for mounting onto leveling machine tool tables or inspection jigs, and for use in situations where standard dial gauges are difficult to read. Model 1960T and 1961T, which uses Mitutoyo’s proprietary shock-proofing mechanism, has excellent durability and shock resistance. DIMENSIONS Order No. A B C E F G […]

AUTHOR RATE
Mitutoyo-SERIES 2-Back Plunger Type Dial Indicator

Back plunger type dial gauges are suitable for mounting onto leveling machine tool tables or inspection jigs, and for use in small spaces where the graduations of standard dial gauges are difficult to see. Models 2960T, 2961T, 2990T-10 and 2991T-10, which use Mitutoyo’s proprietary shock-proofing mechanism, have excellent durability and shock resistance. Model 2990T-10 provides […]

AUTHOR RATE
Mitutoyo-SERIES 2-Special Dial Indicators

Peak hold type Special dial Indicator gauge A mechanism holds the pointer and the spindle at the position of maximum depression and hence displays the maximum value. * Clearance of peak hold: push the nut in the direction of the arrow indicated in the dimensional drawing below. DIMENSIONS SPECIFICATIONS Metric Order No. Graduation Range (range/rev) […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Special Dial Indicators-Dial Indicators

Adjustable hand dial indicators The hand position can be adjusted independently of the position of the spindle by rotating the top knob. DIMENSIONS * Contact points, other than dedicated types, cannot be installed. * The shoulder on a contact point (standard accessory) acts as a stop to prevent spindle overrun that may otherwise damage the indicator. […]

AUTHOR RATE
Mitutoyo-SERIES 3, 4 – Long StrokeType, Large Diameter-Dial Indicators

Dial indicators with a large-diameter dial face for easy reading. Models with longer measuring ranges are also available. All types are supplied with limit markers and a bezel clamp as standard. Both the stem and the spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use. The bezel clamp and lifting lever (optional)*1 […]

AUTHOR RATE
Mitutoyo-SERIES 1 – Compact One Revolution Type for Error-free Reading-Dial Indicators

Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shock due to sudden spindle retraction caused by impact. This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions. The dead zone in red indicates “accuracy not guaranteed” . One revolution type Back plunger dial gages are also […]

AUTHOR RATE
Mitutoyo-SERIES 1 – Compact Type, Small Diameter-Dial Indicators

Compact dial indicators with bezel diameters of ø40mm for restricted-space applications in gaging jigs. SPECIFICATIONS Metric * Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed. Inch * Completed products inspection is performed in the vertical position (contact point downward) and the stated accuracy is guaranteed. […]

AUTHOR RATE
Mitutoyo-SERIES 1 – Compact Type, Small Diameter-Dial Indicators

Compact dial indicators with bezel diameters of ø31 or ø36mm for restricted-space applications in gaging jigs. DIMENSIONS Order No. A B C D E F G H I 1911T-10 15.5 42 31 12.9 19.2 15 11.5 30 5.9 1913T-10 15.5 39.5 31 12.9 19.2 15 9 30 5.9 1003T 18 40.3 36 13 15 9.5 […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Long Stroke Type-Dial Indicators

Long stroke dial indicators with a ø57mm outer frame. All the models are equipped with limit markers and a bezel clamp as standard. An O-ring is employed to ensure air-tightness between the outer frame and the crystal case to prevent water or oil penetration. Both the stem and the spindle are made of high-strength quench-hardened […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Standard One Revolution Type for Error-free Reading, Lightweight Type-Dial Indicators

Excellent water- and drip-proof characteristics (IP43). Smooth movement thanks to the improved design of bush and stem. Application of a hard coating on the surface of the crystal makes the gage scratch- and oil-resistant. Lightweight type (70g). DIMENSIONS * When installing an optional back (refer to page F-55 for details) please separately prepare 4 fixing […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Standard One Revolution Type for Error-free Reading, Waterproof Type-Dial Indicators

Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shock due to sudden spindle retraction caused by impact. This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions. The dead zone in red indicates “accuracy not guaranteed”. One revolution type Back plunger dial gages are also available. […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Standard One Revolution Type for Error-free Reading-Dial Indicators

Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shock due to sudden spindle retraction caused by impact. This series has been developed to eliminate the possibility of reading errors due to miscounting multiple revolutions. The dead zone in red indicates “accuracy not guaranteed”. DIMENSIONS Note 1: Dimensions of the inch (ANSI/AGD Type) dial […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Waterproof Type, 0.01mm & 0.001mm Graduation-Dial Indicators

Waterproof type dial gages having a bezel with an outside diameter of 57mm. All types come with limit markers and a bezel clamp as standard. The bezel clamp can be attached to either the right or left side. These parts can be easily installed and removed without tools. The stem and spindle are made of […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Standard Type, 0.001mm & 0.005mm Graduation-Dial Indicators

Standard 0.001mm and 0.005mm graduation dial indicators having a bezel with an outside diameter of ø57mm. All types come with limit markers and a bezel clamp. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools. Secure adhesion […]

AUTHOR RATE
Mitutoyo-SERIES 2 – Standard Type, 0.01mm Graduation-Dial Indicators

Standard 0.01mm graduation dial gages having a bezel with an outside diameter of 57mm. All types come with limit markers and a bezel clamp as standard. The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools. Secure adhesion […]

AUTHOR RATE
Mitutoyo-SERIES 543 – with Back-light LCD Screen-ABSOLUTE Digimatic Indicator ID-F

GO/±NG judgment function: If a judgment result shows an out of tolerance condition, the display backlighting changes from green to red. An analog bar indicator has been integrated to make upper/lower limit and turnover point reading more comfortable. With Mitutoyo’s ABSOLUTE Linear Encoder technology, once the measurement reference point has been set it will not […]

AUTHOR RATE
Mitutoyo-SERIES 543 – High Accuracy and High Functionality Type-Digimatic Indicator ID-H

This new-generation digital indicator offers the excellent accuracy and functionality expected from the top class of indicator. Take advantage of its high accuracy backed up by 0.5μm/.00002” resolution, remote control functionality via a handheld controller (or an RS-232C interface) and easy runout measurements with the well-established analog bar display. Functionality meets the needs of diverse […]

AUTHOR RATE
Mitutoyo-SERIES 575 – Slim and Economical Design-ABSOLUTE Digimatic Indicator ID-U

General purpose indicator with the measuring range of 25.4mm/ 1”. Cost-effective and user-friendly type which is equipped with the basic functions necessary. The ABS (absolute) sensor restores the last origin position automatically when the indicator is turned on, and realizes high reliability by eliminating over-speed errors.  Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-18. […]

AUTHOR RATE
Mitutoyo-SERIES 543 – Signal Output Function Type-ABSOLUTE Digimatic Indicator ID-C

Enables a tolerance judgment to be output to external equipment for a measurement result against user-defined limits. Solid-state switching provides high reliability by avoiding metallic switch contacts. Output is enabled by directly connecting to external devices (sequencers, etc., for which a logical invert is available if required). The measurement and judgment results are displayed on the LCD. The […]

AUTHOR RATE
Mitutoyo-SERIES 543 – Calculation Type-ABSOLUTE Digimatic Indicator ID-C

Calculation function operates on spindle displacement. Entering the appropriate formula factors for a fixture dedicated to the application enables direct measurement readout, thereby eliminating any need for the conversion tables previously needed for those applications where fixtures are typically used. Peak-Value Run-out/MAX/MIN Hold enables GO/±NG judgement for peak value. Simple operation of many functions with five buttons and […]

AUTHOR RATE
Mitutoyo-SERIES 543 – Bore Gage Type-ABSOLUTE Digimatic Indicator ID-C

Dedicated to inside measurement with minimum-value Hold and tolerance judgement functions. Measurement data memory function (9 measurement results can be stored) Simple operation of many functions with five buttons and status icons. Wide LCD and new analog bar graph are now standard on all models. Sampling is performed fifty times per second for accurate detection of maximum and […]

AUTHOR RATE
Mitutoyo-SERIES 543 – Peak-Value Hold Type-ABSOLUTE Digimatic Indicator ID-C

Run-out/MAX/MIN Hold function enables GO/±NG judgement for peak or difference values. Simple operation of many functions with five buttons and status icons. Wide LCD and new analog bar graph are now standard on all models. Sampling is performed fifty times per second for accurate detection of maximum and minimum values. SPECIFICATIONS Metric Order No.(w/lug, flat-back) Range Resolution Accuracy*1 Hysteresis*1 […]

AUTHOR RATE
Mitutoyo-SERIES 543 – with Dust/ Water Protection Conforming to IP66-ABSOLUTE Digimatic Indicator ID-N/B

Our unique ABS sensor restores the last origin position automatically when the indicator is turned on. The chance of overspeed errors has been eliminated thanks to the ABS sensor. Rated to IP66: can be used satisfactorily even in adverse environments where the indicator is subject to splashing by cutting fluid or coolant. Slim body design […]

AUTHOR RATE
Mitutoyo-SERIES 543 — Standard Type-ABLOLUTE Digimatic Indicator ID-CX

The ABS (absolute) sensor restores the last origin position automatically when the indicator is turned on. Note: Regarding origin setting, refer to “Origin Setting of Digimatic Indicators” on page F-18. Thanks to Mitutoyo’s ABSOLUTE Linear Encoder, reliability has been increased due to elimination of over-speed errors. Tolerance-judging measurement is available by setting upper and lower […]

AUTHOR RATE
Mitutoyo-SERIES 543-ABSOLUTE Solar-Powered Digimatic Indicator ID-SS

Solar powered An environmentally friendly measuring instrument that does not require batteries, eliminating the hassle and cost of battery replacement. Can operate under minimum light conditions of 40 lux—lower than the level in a warehouse. Built-in recharger The large-capacity built-in reservoir capacitor allows you to use the indicator for long periods of time under light conditions below the […]

AUTHOR RATEUSERS RATE (0)
BACK CODE – 7330

Here is the review of insize back code. It contains Lug Back,Flat Back with specification in pdf. To Know more about dealer In Pune.

AUTHOR RATEUSERS RATE (0)
BAKER UNIVERSAL TEST SET

Here is the review of Gauge Baker Gauge Universal test set with Unique Features and Technical Specification.know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
BAKER DIAL GAUGE ACCESSORIES

Here is the review of dial gauge accessories. It Contains Dial Gauge Accessories,Contact Point,Back with Technical Specifications.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
BAKER BACK PLUNGER DIAL GAUGE

Here is the reviews of back plunger. It contains Mode 38 Back Plunger dial gauge with Features & Technical specification. Know more about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
BAKER LEVER DIALS

The review of Lever dials. It contains Lever dials model 29/38 lever dial & long stylus dial gauges with Features & specification.

AUTHOR RATEUSERS RATE (0)
BAKER DIGITAL PLUNGER DIAL GAUGE

Here is the review of Digital Dial Plunger. It Contains Digital Plunger Dial Gauge with Features & Technical Specifications.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
Baker Mechanical Plunger Dial Gauges

Here is the review of Dial Gauge.It contains Mechanical dial gauges with Advance Features & Technical Specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
DIAL TEST INDICATOR CENTERING HOLDER CODE – 6291

Here is the review of Dial Indicator. It Contains Dial Test Indicator Universal holder code 6297 – 2 with Technical specification.

AUTHOR RATEUSERS RATE (0)
DIAL TEST INDICATOR UNIVERSAL HOLDER CODE – 6297

Here is the review of Dial Indicator.It Contains Dial test indicator universal holder code 6297 with Features & Specification. Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
DIAL TEST INDICATOR HOLDER CODE – 6296

Here is the review of Dial Indicator.It Contains Dial test Indicator holder code 6296 with Features & Technical specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
STYLI FOR DIAL TEST INDICATORS CODE -6284

Here is the review of Test Indicators.It Contains styli for dial test indicators code 6284 with Features & Specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
DIAL TEST INDICATOR HOLDER CODE – 6293

The review of Dial Indicator.It Contains Dial Test Indicator holder code 6293-,6293-2 with Features & Technical Specifications. Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
EXTENSION ROD

Here is the review of Extension rod. It Contains Extension rod 6282-2010 with Technical Specifications. Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
ROLLER POINT

Here is the review of Roller Point.It Contains Roller Point 6282-1901 with Features & Technical Specification.Know about dealer in pune.

AUTHOR RATEUSERS RATE (0)
BLADE POINT

Here is the review blade point.It contains Blade Point 6282 – 1801 with Features & Technical Specifications.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
KNIFE EDGE POINT

Here is the review of Knife edge point.It contains Knife edge point code 6282-1001 with features & specification. Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
NEEDLE POINT

Here is the review of Needle Point.It Contains Needle Point code 6282-1711,6282-1601 with Features & Specifications.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
CONICAL POINT

Here is the review of conical point. It contain different type i.e 6282-0601,6282-0801,6282-0701,6282-0901, with specification. Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
BALL POINT

Here is the reviews of Ball Point. It Contain two type points 6282-0101,6282-0303 with features and specification. Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
SHELL TYPE POINT

Here is the review of shell type point with shell type point code 6282-0202 with Technical Specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
FLAT POINT

Here is the review of Flat Point.It Contains Flat Point 6282-1101,6282-1201,6282-1301 with Technical Specification. Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
SPHERICAL POINT

Here is the review of Spherical Point . It contains Spherical Point code 6282-0401 with Features & Specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
ROUND BODY DIAL TEST INDICATOR CODE – 2391

Here is the review of Round Body dial indicator.It Contains round body dial test indicator code 2391 with features & Specification.

AUTHOR RATEUSERS RATE (0)
SIDE TYPE DIAL TEST INDICATOR CODE – 2898

Here is the review of Indicator.It Contains side type dial test indicator code 2898 with Features & Technical Specification.know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
LONG STYLI DIAL TEST INDICATOR CODE – 2896

Here is the review of Dial Indicator. It contains long styli dial test indicator code 2896 with Features & Specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
BACK PLUNGER TYPE DIAL TEST INDICATOR CODE – 2398

Here is the review of Back plunger. It contains back plunger type dial test indicator code 2398 with Features & technical specification. know about dealer.

AUTHOR RATEUSERS RATE (0)
BACK PLUNGER LONG STYLI DIAL TEST INDICATOR CODE – 2899

Here is the reviews of back plunger.It contains back plunger dial indicator code 2899 with feature & Specification.know about dealer in pune.

AUTHOR RATEUSERS RATE (0)
DIAL TEST INDICATOR CODE – 2380

Here is the review of Dial Indicator. It contains Dial Test Indicator code 2380 with Features & Technical Specifications. Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
PRECISION DIAL TEST INDICATOR CODE – 2897

Here is the review of Dial Indicator.It contains Precision dial test indicator code 2897 with advance features & Specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
PRECISION DIAL TEST INDICATOR CODE – 2880

Here is the review of Dial Indicator.It Contains Precision dial test indicator code 2880 with advance features & Specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
ONE REVOLUTION COMPACT DIAL INDICATOR CODE – 2884

Here is the review of Dial Indicator.It Contains One revolution compact dial indicator code 2884 with Features & Specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
COMPACT DIAL INDICATOR CODE – 2311

Here is the review of Dial Indicator. It contains Compact Dial Indicator code 2311 with unique Features . Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
ONE REVOLUTION DIAL INDICATOR CODE – 2882

Here is the Dial Indicator.It Contains one revolution dial indicator code 2882 with Advance Features & Specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
ONE REVOLUTION PRECISION DIAL INDICATOR CODE – 2885

Here is the review of Dial Indicator.It Contains One revolution precision dial indicator code 2885 with Features & Specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
DIAL INDICATOR CODE – 2309

Here is the review of Dial Indicator. It Contains Dial Indicator code 2309 with Features & Technical Specification. Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
WATER INDICATOR CODE – 2324

Here is the review of Insize Water Indicator Code 2324-10*,2324-10F* with Unique Features and Technical Specifications. Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
SHOCKPROOF DIAL INDICATOR CODE – 2314

Here is the review of Indicator.It Contains Shockproof dial indicator code 2314 with Features & Technical Specification.Know abut dealer in Pune.

AUTHOR RATEUSERS RATE (0)
DIAL INDICATOR CODE – 2308

Here is the review of Dial Indicator. It contains Dial Indicator code 2308 with Feature & Technical Specification. Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
PRECISION DIAL INDICATOR CODE – 2313

Here is the review of Dial Indicator.It contains Precision dial indicator code 2313 with advance features & Specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
PRECISION DIAL INDICATOR CODE – 2830

Here is the review of Dial Indicator.It contains precision dial indicator code 2830 with advance features & Specification.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
DIGITAL INDICATOR FOR BORE GAGES CODE – 2108

The review of Digital Indicator Gauge.It Contains Digital Indicator For Bore gauges code 2108 with features & Specifications.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
DIGITAL INDICATOR WITH LIFTING LEVER CODE – 2109

Here is the review of Digital Indicator.It Contains Digital Indicator with Lifting lever code 2109 with Feature & Specifications. Know about dealer in pune.

AUTHOR RATEUSERS RATE (0)
WATERPROOF DIGITAL INDICATOR CODE : 2115

Here is the review Insize Waterproof Digital Indicator Code 2115,2115-101*,251*101F* etc. with Unique Features & Specifications.know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
DIGITAL INDICATOR CODE : 2104

Here is the review of Digital Indicator.It Contains Digital Indicator code 2104 with Features & Technical specifications.Know about dealer in Pune.

AUTHOR RATEUSERS RATE (0)
DIGITAL INDICATOR CODE 2103

Here is the review of Digital Indicator. It Contains Digital Indicator Code 2103 with Features & Technical specifications . Know about dealer in Pune.

Gokul Traders Copyright © 2010-19 Developed by Shades Of Web. All rights reserved.