- Resolution: 0.01mm/0.0005″
- Digital depth gauge supplied with three interchangeable points (flat, spherical, disk)
- Buttons: on/off, set, mm/inch, preset (+, -)
- Digital depth gauge with automatic power off, move the digital unit to turn on power
- Battery CR2032
- Data output
- Made of stainless steel
- Optional accessory: data output cable (code 7306-20, 7302-SPC5A/SPC5B, 7305-SPC2A), disk points (see below table), extension base (code 6141, for 1148-120 and 1148-200)
| Code | Range* | Accuracy | L | d | Remark |
| 1148-110S | 0-100mm/0-4″ | 0.02mm | 200 | 45 | |
| 1148-100 | 0-100mm/0-4″ | 0.02mm | 200 | 85 | |
| 1148-120 | 0-120mm/0-4.7″ | 0.03mm | 300 | 101 | one-hand use, with clamp holes for extension base |
| 1148-200 | 0-200mm/0-8″ | 0.03mm | 300 | 101 | with clamp holes for extension base |
* When disk points are used, the range is reduced by 10mm
Optional Disk Point
| Code | Description | H | Remark |
| 1148-P101 | 0.5mm disk point | 0.5±0.005mm | for narrow grooves |
| 1148-P102 | 0.7mm disk point | 0.7±0.005mm | for narrow grooves |
| 1148-P103 | 1mm disk point | 1±0.005mm | for grooves inside blind hole |
| 1148-P104 | 0.5mm disk point | 0.5±0.005mm | for grooves inside blind hole |