- Easy and error-free reading with both up and down digital counters as well as a dial.
- Can be zero-set at any arbitrary position.
- Provided with a large adjustment wheel for easy height adjustment.
- Clamp can be operated easily and securely.
- Fits comfortably in the hand and moves easily on the surface plate.
- Carbide tipped scriber (No. 07GZA000) is attached as standard. (Standard accessory: Scriber clamp No.05GZA033)
- For precision Black Granite Surface Plates, refer to page E-51.
SPECIFICATIONS
Metric
| Order No. | Range | Accuracy | Graduation | Height | Mass |
|---|---|---|---|---|---|
| 192-130 | 0 – 300mm | ±0.03mm |
0.01mm |
470mm | 4.2kg |
| 192-131 | 0 – 450mm | ±0.05mm | 648mm | 9.2kg | |
| 192-132 | 0 – 600mm | 798mm | 9.8kg | ||
| 192-133 | 0 – 1000mm | ±0.07mm | 1220mm | 17.0kg |
Inch
| Order No. | Range | Accuracy | Graduation | Height | Mass |
|---|---|---|---|---|---|
| 192-150 | 0 – 12″ | ±.0015″ |
.001″ |
470mm | 4.2kg |
| 192-151 | 0 – 18″ | ±.002″ | 648mm | 9.2kg | |
| 192-152 | 0 – 24″ | 798mm | 9.8kg | ||
| 192-153 | 0 – 40″ | ±.003″ | 1220mm | 17.0kg |
DIMENSIONS
Optional accessories
07GZA000: Scriber
953638: Holding bar for test indicator (length: 50mm)
900209: Holding bar for test indicator (length: 100mm)
953639: Holding bar for test indicator (length: 2”)
900306: Holding bar for test indicator (length: 4”)
900321: Swivel clamp used with holding bar (metric)
900322: Swivel clamp used with holding bar (inch)
902053: Clamp (with dovetail groove, ø6 and ø8 holes)
Note: A test indicator can be mounted on a height gage using a holding bar and clamp.