Mitutoyo SERIES 192 – Multi-function Type with SPC Data Output – Digimatic Height Gage

• Double-column structure ensures high measuring accuracy.
• Ergonomic base fits comfortably in the hand.
• Bidirectional touch-trigger probe is available as an optional accessory.
• Character height of the LCD display has been increased (10mm to 11mm) and a high- contrast LCD display unit adopted, so that the readability is improved.
• Inclined handle improves slider ergonomics.
• Allows integration into statistical process control and measurement systems. Refer to page A-3.
• Battery: SR44 (1 pc), 938882. For initial  Battery: SR44 (1 pc), 938882. For initial operational checks (standard accessory)
• Battery life is 3,500 hours in continuous use.
• Carbide-tipped long scriber (No. 905200 with overall length of 150mm) is provided as a standard accessory. (Standard accessory: scriber cramp No. 05GZA033)
• For precision Black Granite Surface Plates, refer to page E-51.

SPECIFICATIONS

Metric

* Excluding quantizing error
Inch/Metric

* Excluding quantizing error

Functions
Origin-setting (ABS measurement mode):   Any arbitrary value can be stored as the origin point.

Zero-setting (INC measurement mode):  Displayed value can be set to zero at any arbitrary position of the slider.

Origin restoration:  Previously set origin is restored when switching back to ABS mode.

Presetting (ABS INC measurement mode):  Displayed value can be set to any arbitrary value, including negative values.

Measuring direction

Measuring direction can be switched at the press of a button.Data hold  Display value can be held. Reverts to ABS or INC mode when cancelled.

Alarm: Error message is displayed when overflow or overspeed of displayed value arises and measurement is stopped.

Data output:   Allows integration into statistical process control and measurement systems. (Refer to page A-3.)

Fine and coarse height adjustment through knob and wheel combination.

Slider height adjustment wheel allows fine and coarse height adjustment.

Coarse adjustment Fine adjustment

Push the small fine-adjustment knob in to disengage gearing and then turn the large wheel.

Pull the fine-adjustment knob out to engage gearing and then turn this knob, which then slowly turns the wheel.

Low-voltage alert:  When battery voltage becomes low, a warning appears in the display.

* Probe-tip-diameter compensation mode is a function provided for Order No. 192-663-10/192-664-10/192-665-10/192-670-10/ 192-671-10/192-672-10/192-673-10.

Probe-tip diameter compensation:  An adjustment is applied to the raw measurement data to compensate for the effect of the size of the spherical contact point used by the bidirectional touch-trigger probe.

Presetting (2 positions)

With two preset functions,  two reference heights can be used relative to a surface plate.

• Example of preset 1
  To measure  a height of 70mm, with a reference plane height of 50mm
• Example of preset 2
  To measure  a height of 130mm, with a reference plane height of 150mm

DIMENSIONS

Order No. 192-663-10, 192-664-10 ( ): No. 192-664-10

Order No. 192-665-20

Optional Accessory

Bidirectional touch-trigger probe
Improves accuracy in step, internal thickness, and outside width measurement by minimizing reproducibility error.

SPECIFICATIONS
Metric

Inch

For details of the connecting cable, refer to page D-39.

Connecting cables for IT/DP/MUX
905338: SPC cable (1m)
905409: SPC cable (2m)
USB Input Tool Direct
06ADV380F: SPC cable for USB-ITN-F (2m)
Connecting cables for U-WAVE-T
02AZD790F: SPC cable for U-WAVE (160mm)
02AZE140F: SPC cable for footswitch