Call Us: +91-7410524141
Call Us: +91-7410524141
Metric
| Code No. | Range (mm) | Resolution (mm) | Maximum permissible error JMPE (μm) | Anvil | Remarks |
|---|---|---|---|---|---|
| Digimatic | |||||
| 314-251-30 | 1 – 15 | 0.001 | ±4 | 60° | w/groove |
| 314-252-30 | 10 – 25 | – | |||
| 314-253-30 | 25 – 40 | ±5 | – | ||
| 314-261-30 | 1 – 15 | ±4 | – | ||
| 314-262-30 | 10 – 25 | – | |||
Inch/ Metric
| Code No. | Range (mm) | Resolution (mm) | Maximum permissible error JMPE (μm) | Anvil | Remarks |
|---|---|---|---|---|---|
| Digimatic | |||||
| 314-351-30 | 0.05 – 0.6 | 0.00005 in/ 0.001 mm | ±0.0002 | 60° | w/groove |
| 314-352-30 | 0.4 – 1 | – | |||
| 314-353-30 | 1 – 1.6 | ±0.00025 | |||
| 314-361-30 | 0.05 – 0.6 | ±0.0002 | – | ||
| 314-362-30 | 0.4 -1 | – | |||
