Asker Durometers Dealer
AUTHOR RATE
DUROMETERS

Asker hand held durometers measure hardness from sponge to hard rubber and plastics, covering the range of Shore D, Shore A, Asker C and Asker F hardness scales. They are easy-to-use, portable and very accurate with a high degree of repeatability. Measurements are non-destructive. Asker durometers offer optional peak indicators to more closely monitor the […]

Imada Data Acquisition Dealer
AUTHOR RATE
DATA ACQUISITION

Collect force, force and displacement or torque data from force gauges, torque gauges and testers with RS-232 or USB ports. Force Data Acquisition Software SW-1X Force Data Acquisition Software Optional – DB-1 – Data Input Button DB-1 is a simple, compact, one channel interface that enables the user to send measurement data to a PC […]

Imada Breakaway Torque Tester Dealer
AUTHOR RATE
BREAKAWAY TORQUE TESTER

DI-12 Breakaway Torque Tester Model: DI-12-SL Automatic Breakaway Torque Tester   Ranges DI-12-SL Ranges (Resolution) Accuracy: ±1% F.S., 1LSD Model Capacity Approx. RPM Recommended Thread Sizes lbf-in kgf-cm N-m DI-12-SL4 0.30 – 35.00 0.30 – 40.00 0.030 – 4.000 N-m 0.7 #6~#10 (M3~M5) DI-12-SL15 3.0 – 130.0 3.0 – 150.0 0.30 – 15.00 N-m 0.7 […]

Imada Rotational Friction Torque Dealer
AUTHOR RATE
ROTATIONAL FRICTION TORQUE

NTS-6 Motorized Rotating Friction Torque Tester Motorized Rotating Friction Torque Tester Series: NTS-6 Ranges NTS-6 Ranges Accuracy: ±1% F.S., ±1LSD Note: oz models do not have selectable units Model Capacity Max Speed (no-load) Bit Size ozf-in lbf-in Kgf-cm mN-m N-m rpm NTS-6-S1oz 0.30 ~14.00 — — — — 85 4mm NTS-6-S2oz 0.30 ~ 28.00 — […]

Imada Torque Calibrators Dealer
AUTHOR RATE
TORQUE CALIBRATORS

Torque calibrators offer the ability to check torque on a manual torque wrenches, electric and impact driven torque tools. Manual Torque Wrench Calibrator Manual torque wrench calibrators allows users to check torque on click type wrenches. Select remote or integrated sensor models. DIS-IP Digital Torque Tester for Manual Wrenches Model: DIS-IP with Remote Sensor Model: […]

Imada Digital Torque Screwdrivers Dealer
AUTHOR RATE
DIGITAL TORQUE SCREWDRIVERS

Digital torque screwdriver/testers capture peak torque or display torque measurement in real time mode. High and low setpoints with LED indicator and audible alarm facilitate Go/No Go testing. Perform breakaway tests. GLK series torque screwdrivers are accurate to 1.5% F.S., ±1 LSD and are powered by a coin battery. DID torque screwdriver/testers are accurate to […]

Imada Digital Torque Wrenches Dealer
AUTHOR RATE
DIGITAL TORQUE WRENCHES

Digital torque wrenches capture peak torque or display torque measurement in real time mode. High and low setpoints with LED indicator and audible alarm facilitate Go/No Go testing. GEK series torque wrenches are accurate to 1.5% F.S., ±1 LSD and are powered by a coin battery. DIW torque wrench/testers are accurate to 0.5% F.S., ±1 […]

Imada Torque Gauges Dealer
AUTHOR RATE
TORQUE GAUGES

Digital torque gauges are designed for clockwise and counter-clockwise torque testing. The Jacob’s chuck is a versatile attachment and can be used for a variety of applications. HTGS Digital Torque Gauge Ranges Accuracy: ±0.5% F.S. ±1 LSD Model Capacity (Resolution) lbf-in kgf-cm N-cm HTGS-4 70.00 ozf-in (0.01 ozf-in) 5.000 (0.001 kgf-cm) 50.00 (0.01 N-cm) HTGS-15 […]

Imada CAP Torque Testers Dealer
AUTHOR RATE
CAP TORQUE TESTERS

Imada cap torque testers measure cap tightening or loosening. The DTXS series cap torque tester can be used for rapid cap testing. The MTG allows for more accurate and repeatable results by maintaining a constant capping speed. Both testers have several ranges up to 85 lbf-in. DTXS Cap Torque Tester Series DTXS RANGES DTXS Cap […]

Imada Mini Material Tester Dealer
AUTHOR RATE
DESKTOP MATERIAL TESTERS

FSA-K2 Material Tester Integrated Force & Displacement Testers Ranges Model FSA-0.5K2-xx FSA-1K2-xx FSA-2.5K2-xx 18 ozf FSA-0.5K2-1 FSA-1K2-1 FSA-2.5K2-1 4.4 lbf FSA-0.5K2-4 FSA-1K2-4 FSA-2.5K2-4 11 lbf FSA-0.5K2-11 FSA-1K2-11 FSA-2.5K2-11 44 lbf FSA-0.5K2-44 FSA-1K2-44 FSA-2.5K2-44 110 lbf FSA-0.5K2-110 FSA-1K2-110 FSA-2.5K2-110 –220 lbf FSA-1K2-220 FSA-2.5K2-220 –550 lbf – FSA-2.5K2-550 Standard Features FSA-K2 Standard Features Ultra rigid, 0.5 mm […]

Imada Mini Material Tester Dealer
AUTHOR RATE
MINI MATERIAL TESTERS

Mini material testers are portable, check both force and displacement and can record data to USB flash drives.

Imada Strength Testers Dealer
AUTHOR RATE
STRENGTH TESTERS

Digital Tensiometers High Capacity Digital Tensiometers Standard Features ZTS/ZTA Tensiometer Standard Features Best value high capacity tensiometers with capacity up to 1100 lbf (push/pull) USB (virtual COM port), RS-232C Tensiometers, Digimatic and analog outputs Tensiometers have heavy-duty metal construction lbf, kgf, and Newton units are push-button selectable Overload alarm, low battery display indicator Outstanding display […]

Imada Spring Testers Dealer
AUTHOR RATE
SPRING TESTERS

Imada offers manual or motorized spring testers in vertical or horizontal configurations. Lever-operated manual systems enable rapid compression and tension spring testing. Wheel-operated manual systems enable slower, more precise movement with the hand wheel. Motorized compression testers offer the most control and highest degree of repeatability with the ability to set a constant test speed […]

AUTHOR RATE
PUSH PULL TESTERS

Imada offers manual or motorized push/pull testers in vertical or horizontal configurations. Lever-operated manual systems enable rapid push/pull testing up to 220 lbf. Wheel-operated manual systems enable slower, more precise movement with the hand wheel up to 750 lbf. Motorized push/pull testers offer the most control and highest degree of repeatability with the ability to […]

Imada Puncture Testers Dealer
AUTHOR RATE
PUNCTURE TESTERS

Mechanical puncture testers check the puncture resistance or hardness of materials like dry wall, foam boards, cardboard, etc. They are ideal for handheld penetration tests or mounting to a test stand and intrinsically safe in hazardous environments. An optional handle is available. Imada offers puncture fixtures for mounting on lever-operated, wheel-operated and motorized test stands […]

Imada Peel Testers Dealer
AUTHOR RATE
PEEL TESTERS

Imada offers motorized peel testers in vertical or horizontal configurations. The motorized test stand, digital force gauge and peel fixture apply tension to a safety seals, tapes and laminates. Special attachments and fixtures facilitate 45°, 90°, 180°, ‘T’ and rotary peel tests. Motorized peel testers offer speed control and highest degree of repeat ability with […]

Imada Food Testers Dealer
AUTHOR RATE
FOOD TESTERS

These automated food testers are designed for clean, smooth trouble-free operation. Food Rheology testers automatically test firmness, elasticity or viscosity using a load cell combined with programmable movement control. The easy-to-use program dial and menu screens control probe positioning and speed. Select from three movement patterns. The USB port streams 1,000 force data/second to the […]

Imada Wire Crimp Testers Dealer
AUTHOR RATE
WIRE CRIMP TESTERS

Imada offers manual and motorized wire crimp test systems in either vertical or horizontal configurations. Lever-operated systems offer basic functionality and rapid destructive testing up to 220 lbf. Motorized systems have speed control and are capable of destructive or force-controlled non-destructive testing up to 1100 lbf. Choose from manual or automatic wire-gripping fixtures Digital gauges […]

Imada Compression Tester Dealer
AUTHOR RATE
COMPRESSION TESTER

Dedicated compression testers offer low footprint test systems. Lever operated systems allows for quick and repeatable compression testing. The wheel operated system allows for more precision with hand wheel operation. The motorized compression tester allows for the most control and the highest degree of repeatability with the ability to set a constant test speed. Lever […]

Imada Screw Cap Torque Dealer
AUTHOR RATE
SCREW CAP TORQUE TESTER

DTXS/DTXA series  Model  Capacity  Display  DTXS-2N  2 N-m (200N-cm)  2.000N-m (200.0N-cm)  DTXS-5N  5 N-m (500N-cm)  5.000N-m (500.0N-cm)  DTXS-10N  10N-m (1000N-cm)  10.00N-m (1000N-cm)  DTXA-2N  2 N-m (200N-cm)  2.000N-m (200.0N-cm)  DTXA-5N  5 N-m (500N-cm)  5.000N-m (500.0N-cm)  DTXA-10N  10N-m (1000N-cm)  10.00N-m (1000N-cm)    Accuracy  ±0.5%F.S.±1digit  Unit of measurement  N-m, N-cm, kgf-m, kgf-cm, lbf-in, ozf-in(※1)  Display  4-digit Organic EL […]

Imada Hand Use Digital Torque Gauge Dealer
AUTHOR RATE
HAND USE DIGITAL TORQUE GAUGE

HTGS/HTGA series  Model  Capacity  Display  HTGS-2N  2N-m(200N-cm)  2.000N-m(200.0N-cm)  HTGS-5N  5N-m(500N-cm)  5.000N-m(500.0N-cm)  HTGS-10N  10N-m(1000N-cm)  10.00N-m(1000N-cm)  HTGA-2N  2N-m(200N-cm)  2.000N-m(200.0N-cm)  HTGA-5N  5N-m(500N-cm)  5.000N-m(500.0N-cm)  HTGA-10N  10N-m(1000N-cm)  10.00N-m(1000N-cm)    Accuracy  ±0.5%F.S.±1digit  Unit of measurement  N-m, N-cm, kgf-m, kgf-cm, lbf-in, ozf-in(※1)  Display  4-digit Organic EL  Sampling rate  2000 data / sec at maximum  Function  Customized display (header and footer), Peak hold […]

Imada Compression Test
AUTHOR RATE
FORCE GAUGE ATTACHMENTS

ATTACHMENTS FOR COMPRESSION TEST Fixtures for varieties of compression test such as durability tests, bending tests, sticking tests. PG-2/3/4/5 Compression Test for Small Spots Ideal for small sample compressions and intrusion tests.    Models  PG-2  PG-3  PG-4  PG-5  Capacity(N)  100  100  200  200  External diameter(mm)  Approx.φ2  Approx.φ3  Approx.φ4  Approx.φ5  Weight(g)  Approx.2  Approx.3  Approx.4  Approx.5  Mounting […]

Imada Manual Test Stand Series
AUTHOR RATE
TEST STAND

MANUAL TEST STAND KV-50N Low Capacity or Small Type Ideal for 50N or less measurements. Small travelling is possible with screw feed. Desktop type. The handle supports small travellings. Option Length Scale Specification  Lists  KV-50N  Capacity  50N  Maximum Sample Height(※1)  Approx.63mm  Feed Amount  1.0mm/1turn  Weight   Approx.2kg  Size  Approx.W140xD180xH220mm   MSF-50N Various measurements are possible by […]

Mitutoyo Digimatic Mini Processor dealer
AUTHOR RATEUSERS RATE (0)
PRINTER DP-1VR (Mitutoyo Digimatic Mini Processor)

It enables to print measuring Maximum/Minimum/Average standard deviation values. To print, a digimatic cable is required. Compatible models ZTA/ZTS/DS2/HTGS/HTGA/DTXS/DTXA The Cables for Past Models Please refer to the list if you are necessary to know the cable for the past models.  ZP,Z2 series  HTG2,DTX2 series Analog cable  CB-104  CB-104  RS-232C cable  CB-204  CB-204  Digimatic cable […]

Imada Amplifier dealer
AUTHOR RATE
AMPLIFIER

ZTA/ZTS Sensor Separate Type Measured value by high speed sampling (Maximum 2000Hz) is displayed. The value is clear to see by an organic EL display. ※It is not possible to connect an amplifier to plural load cells. FA Plus Desktop Type Load Cell Amplifier Size:W210×D160×H99mm Weight:Approx.1.5kg ※It is not possible to connect an amplifier to plural load […]

Imada Standard Type DPU Dealer
AUTHOR RATEUSERS RATE (0)
LOAD CELL AND AMPLIFIER

Load Cell for Compression and Tension Standard Type DPU Easy built-in shape to external equipment. Measure force by mounting an attachment on the thread (the male screw part) Capacity 2N~500N  Accuracy  ±0.2%F.S. or less  Size  Approx.W58×D21×H71~W72×D21×H73mm  Cable Length  Approx.2m   Model Capacity Thread DPU-2N 2N Male Screw M6P1.0  DPU-5N  5N  DPU-10N  10N  DPU-20N  20N  DPU-50N […]

Imada Mechanical Force Gauge Series
AUTHOR RATEUSERS RATE (0)
MECHANICAL FORCE GAUGE

Strong Points Possible to use without battery charge Durable body Easy to read for force changing Weak Points Not suitable for shock tests and breaking tests. It may cause human reading error. FB Series Economical Type Capacity: 10N~500N Accuracy:±0.3%F.S or less The most economical model Specifications  Accuracy ±0.3%F.S. or less  Division 100lines(※1)  Reading method Real […]

Imada Mechanical Force Gauge DS2 Dealer
AUTHOR RATE
DIGITAL FORCE GAUGE

Strong Points Easy to read force values Detailed  analysis is possible by connecting PC. It helps easy data managements Digital  functions are available such as OK/NG judgment Suitable for shock tests and breaking tests. Weak Points Battery charging time is necessary It is difficult to read force changing without the graphing software.   DS2 Capacity […]

Gokul Traders Copyright © 2010-18 Developed by Shades Of Web. All rights reserved.