Designed to allow benchtop use of hand micrometers or other gages which have frames suitable for gripping by the clamp. SPECIFICATIONS Order No. Micrometer ranges Remarks 156-101-10 Up to 100mm (4″)* Adjustable angle type 156-105-10 0-25mm (0-1″), 25-50mm (1″-2″) Fixed angle type 156-102 125-300mm (5″-12″) Vertical type 156-103 300-1000mm (12″-40″) Vertical type * Items that cannot […]

Designed to inspect parallelism and flatness of measuring faces of micrometers. For details, refer to “Quick Guide to Precision Measuring Instruments”. Each set consists of 4 sizes to aid in testing parallelism at various angular positions of the micrometer spindle.   SPECIFICATIONS Metric Order No. Range of micrometer to be checked Sizes of parallels included in set Diameter […]

Used for accurately setting screw thread micrometers at the start or end of the measuring range. Metric Order No. Length Accuracy Metric (unified) 8 = 60° 167-261 25mm ±4µm 167-262 50mm ±5µm 167-263 75mm ±6µm 167-264 100mm ±7µm 167-265 125mm ±8µm 167-266 150mm ±9µm 167-267 175mm ±10µm 167-268 200mm ±11µm 167-269 225mm ±12µm 167-270 250mm […]

Used for adjusting the reference point of the outside micrometer. SPECIFICATIONS and DIMENSIONS Metric Order No. Length  (L) Tolerance   Diameter  (D) 167-101 25mm ±1.5µm 18   6.35mm 167-102 50mm ±2.0µm 40 167-103 75mm ±2.5µm Inch Order No. Length  (L) Tolerance   Diameter  (D) 167-141 1″ ±.00005″ 18   .25″ 167-142 2″ ±.0001″ 40 167-143 […]

Flanged spindle and anvil for measuring width and location of grooves inside bores and tubes. Two-directional ratchet stop. For ID and OD (except for 0 – 25mm) measurement, a master gage is required for adjusting the reference point. SPECIFICATIONS Metric Order No. Range Outside Range Inside Graduation Accuracy Flange Rotating spindle 146-121 0 – 25mm […]

Suited to the measurement of massproduced parts. Various types of indicator can be selected according to the measurement application. Measuring faces: Carbide SPECIFICATIONS Metric Order No. Range Anvil movement Measuring force* Mass 523-141 0 – 25mm   2mm   5 – 10N 710g 523-142 25 – 50mm 810g 523-143 50 – 75mm 920g 523-144 75 – […]

Suited to the measurement of massproduced parts. Designed for measurement using a stand: realizes stable measurement. Greatly improved accuracy: indication error and graduation of 1μm. Water-proof to protection level IP54. Hard-coated crystal: enhanced oil and scratch resistance. Indicator scale is large and easy-to-read. Easily settable adjustable limit markers for GO/±NG testing. Equipped with an elevating workpiece […]

Suited to the measurement of low-volume manufactured parts. Easy to use when operating one-handed due to retractable anvil. In the 25mm measuring range, the model lineup offers a choice of left or right positioning of the anvil-retraction button. Greatly improved accuracy: indication error and graduation of 1μm. Water-proof to protection level IP54. Hard-coated crystal: enhanced oil and […]

Dual-spindle design enables use as a GO/±NG gage by setting upper and lower limits. Measuring faces: Carbide SPECIFICATIONS Metric Order No. Range Graduation Accuracy Flatness Parallelism 113-102 0 – 25mm 0.01mm ±3µm 0.6µm 3µm 113-103 25 – 50mm Technical Data Standard accessories: Reference bar, 1 pc (except for measuring range 0-25mm (0-1″) models) Spanner (200877), 1 […]

Measures tubing thickness, shoulder edge distance, rivet head height, etc., with interchangeable anvils (flat anvil, rod anvil, V-anvil). IP65 water/dust protection (series 317). Equipped with Ratchet Stop for constant  measuring force. SPECIFICATIONS Metric Order No. Range Resolution Accuracy* Digimatic  (LCD) 317-251-30 0 – 25mm 0.001mm ±4µm 317-252-30 25 – 50mm * Excluding quantizing error Inch/Metric Order […]

Measures the height of crimp contacts. Equipped with Ratchet Stop for constant measuring force. IP65 water/dust protection (digital model). Model 342-451 is the Quickmike type, which provides a speedy spindle feed of 10mm per thimble rotation, which enables widely differently sized features to be measured quickly. SPECIFICATIONS Metric Order No. Range Resolution Accuracy* Digimatic  (LCD) 342-271-30 0 […]

Designed for measuring wire thickness. Measurable wire dia.: 10mm or less Measuring faces: Carbide Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric Order No. Range Graduation Accuracy 147-401 0 – 10mm 0.01mm ±3µm Inch Order No. Range Graduation Accuracy 147-402 0 – .4″ .0001″ ±.00015″ DIMENSIONS Technical Data Flatness: 0.6μm/.000024” Parallelism: 1.3μm/.00005” Standard […]

Measures hub thickness and shoulders inside a bore. Measuring faces: Carbide Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric Order No. Range Graduation Accuracy 147-301 0 – 25mm   0.01mm   ±2µm 147-302 25 – 50mm 147-303 50 – 75mm 147-304 75 – 100mm ±3µm Inch Order No. Range Graduation Accuracy 147-351 0 – […]

 Measures the width, height, and depth of can seams. SPECIFICATIONS Metric Order No. Range Graduation Accuracy Remarks 147-103   0 – 13mm   0.01mm   ±3µm for steel cans 147-105 for aluminum cans 147-202 for spray cans Inch Order No. Range Graduation Accuracy Remarks 147-104   0 – .5″   .001″   ±.00015″ for steel […]

The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features. Carbide-tipped measuring faces are also available Non-rotating spindle type. Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric Order No. Range Resolution Accuracy* Remark Digimatic  (LCD) 422-230-30 0 – 25mm       0.001mm   ±3µm   […]

Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. Measures pitch diameter: refer to “Quick Guide to Precision Measuring Instruments” on page B-73. Measuring faces: Carbide Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric For 3-flute cutting tools Order No. Range Resolution Accuracy* […]

Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach features. The measuring points (carbide tipped) have approximately 0.3mm radius. series 342: IP65 Digimatic micrometers Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric Order No. Range Resolution Accuracy* Point Digimatic (LCD) (With carbide tip) 342-251-30 0 […]

The anvil and spindle are of small diameter for measuring splined shafts, slots, and keyways. IP65 water/dust protection (series 331). Measuring faces: Carbide. Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric Order No. Range Resolution Accuracy* Remarks Digimatic  (LCD) 331-251-30 0 – 25mm       0.001mm   ±2µm   Type A 331-252-30 25 […]

Spindle face: Carbide series 395: IP65 spherical and cylindrical anvil type digital micrometers Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric Order No. Range Resolution Accuracy* Remarks Digimatic  (LCD) 395-261-30   0 – 25mm   0.001mm   ±3µm Type A 395-262-30 Type B 395-263-30 Type C 395-264-30 Type D * Excluding quantizing error […]

Measuring faces: Carbide (115-201: only the spindle is carbide tipped.) Series 395: IP65 spherical anvil and spindle type digital micrometer. Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric Order No. Range Resolution Accuracy* 0D Digimatic  (LCD) 395-271-30 0 – 25mm   0.001mm   ±2µm 015 395-272-30 25 – 50mm 395-273-30 50 – 75mm 019 […]

Measuring faces: Carbide (115-101: only the spindle is carbide tipped.) series 395: IP65 digital spherical-flat anvil  type micrometer. Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric Order No. Range Resolution Accuracy* 0D Digimatic  (LCD) 395-251-30 0 – 25mm   0.001mm   ±2µm 015 395-252-30 25 – 50mm 395-253-30 50 – 75mm 019 395-254-30 75 […]

Large diameter dial model enables easy and quick measurement of sheet metal thickness. Adjustable anvil. Measuring faces: Carbide Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Order No. Range Graduation Accuracy Throat depth 119-202 0 – 25mm 0.01mm ±4µm 50mm DIMENSIONS Technical Data Standard accessories: Spanner (200168), 1 pc

Measures thickness of sheet metal. IP65 water/dust protection (series 389). Measuring faces: Carbide Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical. Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric Order No. Range Resolution Accuracy* Throat depth Measuring surfaces Digimatic  (LCD) 389-251-30   0 – 25mm       0.001mm   ±4µm   150mm […]

Measures “root tangent length” of spur gears and helical gears. Determination of the root tangent length: refer to “Quick Guide to Precision Measuring Instruments”. Non-rotating spindle type. Measurable range of gear pitch: 0.5 to 6 module (series 227: 0.4 to 3 module). Equipped with Ratchet Stop for constant measuring force. Supplied with a setting standard […]

Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips. Series 324: IP65 Digimatic gear tooth micrometers. Determination of the over-pin diameter: refer to “Quick Guide to Precision Measuring Instruments”. Interchangeable ball anvils / spindle tips for various gear modules (0.5-5.25) are optional. Equipped with Ratchet Stop for constant measuring […]

Measures “root tangent length” of spur gears and helical gears. Determination of the root tangent length: refer to “Quick Guide to Precision Measuring Instruments”. Equipped with Ratchet Stop for constant measuring force. Supplied with a setting standard (except for 0-25mm/0-1” measuring range).   SPECIFICATIONS Metric Order No. Range Resolution Accuracy* Anvil dia. Measurable module Digimatic […]

• For paper thickness measurement. • Non-rotating spindle. • Equipped with Ratchet Stop for constant measuring force. (8.02±0.8N) SPECIFICATIONS Order No. Range Graduation Accuracy Flatness Parallelism 169-101 0 – 25mm 0.01mm ±4µm 1µm 3µm   Order No. Range Graduation Accuracy Flatness Parallelism 169-103 0 – 1″ .001″ ±.0002″ .00004″ .00015″ DIMENSIONS Anvil dimensions Technical Data Standard […]

• Enables measurement of the pitch diameter of screw threads with a standard micrometer. • Determination of the pitch diameter: refer to “Quick Guide to Precision Measuring Instruments”. SPECIFICATIONS 3-Wire Units set Order No. Set Wire dia. (mm) Support spindle dia. (mm) 313-101 18 0.170 – 3.200 06.35 Order No. (One pair) (Support spindle dia.) 06.35mm […]

Non-rotating spindle type which accepts seven forms of optional interchangeable anvil / spindle tip (flat, spline, spherical, point, knife-edge, disk, and blade) for a wide range of applications. Equipped with Ratchet Stop for constant measuring force. Optional anvils / spindle tips for screw thread measurement (matching V and cone) are also available. SPECIFICATIONS Metric Order No. Range […]

Anvils and spindle tips are interchangeable in matching pairs to enable measurement of Metric/Unified or Whitworth threads. Direct reading of screw pitch diameter (no need for calculation) Equipped with Ratchet Stop for constant measuring force. Interchangeable anvils / spindle tips are optional. SPECIFICATIONS Metric Order No. Range Resolution Accuracy* Digimatic  (LCD) 326-251-30 0 – 25mm   […]

Fixed anvil type to suit 60º threads Directly indicates screw pitch diameter (no need for calculation) Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric Order No. Thread to be measured (Metric/nnified) Range Graduation 125-101 0.4 – 0.5mm/64  – 48TPI     0 – 25mm           0.01mm 125-102 0.6 – […]

Effective for measuring workpiece features where access is difficult. Measuring faces: Carbide Equipped with Ratchet Stop for constant measuring force. SPECIFICATIONS Metric Order No. Range Resolution Accuracy* Digimatic  (LCD) 343-250-30 0 – 25mm   0.001mm ±5µm 343-251-30 25 – 50mm ±6µm 343-252-30 50 – 75mm ±7µm 343-253-30 75 – 100mm ±8µm * Excluding quantizing error […]

Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts. Anvil retracting trigger for quick measurement. Various kinds of indicators*1 are selectable depending on the measurement type (accuracy required, measuring range, etc.). Measuring faces: Carbide Anvil stroke: 3mm SPECIFICATIONS Metric Order No. Range Accuracy 107-201 0 – 25mm   ±2µm 107-202 25 – 50mm 107-203 […]

Here is the review of Disc Micrometer.It Contains Disc Micrometer rotating type with Features & Specification. Know about dealer in Pune..

The review of Micrometer.It Contains Point Micrometer with type MMA25-P1,MMA25-P2,MMA50-P1 etc. With Features & Specification.Know about dealer in Pune.

Here is the review of Micrometer. It Contains spline micrometers with unique Features & Technical Specification.Know about dealer in Pune.

Here is the review of Gauge Baker Gauge Tube Type Micrometer with Unique Features and Technical Specification. Know about dealer in Pune.

Here is the review of Micrometer. It contains Blade Micrometers with Features & Technical Specification. know more about dealer in Pune.

Here is the review of Micrometer.It Contains Measuring tips for screw thread micrometer code 7381 with Features & Specification.Know about dealer in Pune.

Here is the review of Micrometer. It contains Can Seam Micrometer Code 3293 for different metals with Features & Specification. Know about dealer in Pune.

Here is the review of Micrometer.It Contains Sheet Metal micrometer code 3263 with Features & Technical Specification.Know about dealer in Pune.

Here is the review Micrometer. It contains Caliper Type Micrometer Code 3238 with Features & Technical Specification. Know about dealer in Pune.

Here is the review of Hub Micrometer. It contains Hub Micrometer code 3292 with Advance Feature & Specification. Know about dealer in Pune.

Here is the review of Insize Wire Micrometer Code 3285 -10 with Unique Features and Technical Specifications. Know about dealer in Pune.

Here is the review of Digital Micrometer. It Contains Digital screw thread micrometer code 3581 with Features & Specifications. know about dealer in Pune.

Here is the review of Micrometer.It contains screw thread micrometer code 3281 with Unique Features & Technical Specification.Know about dealer in Pune.

Here is the review Micrometer. It contains Ball Tips Gear tooth micrometer Code 7391 – T5 with technical specifications. Know about dealer in Pune.

The review Digital Micrometer.It Contains Digital Gear Tooth micrometer code 3591 with Features & Technical Specification. Know about dealer in Pune.

Here is the review of Gear Micrometer. It Contains Gear tooth micrometer code 3291 with Features & Specification. Know about dealer in Pune.

The review of Digital Micrometer.It Contains Digital non rotating spindle disk micrometer code 3594 with Features & Specifications.

Here is the review of Micrometer.It contains non rotating spindle disk micrometer code 3294 with Features & Specification.Know about dealer in Pune.

Here is the review of Disk Micrometer. It Contains Disk Micrometer code 3282 with Advance Feature & Specifications. Know about dealer in Pune.

Here is the review of Digital Micrometer.It Contains Digital Universal micrometer code 3580 with Features & Specification. Know about dealer in Pune.

Hers is the review of Micrometer. It contains Non Rotating spindle universal micrometer code 3280 with Features & Specification.Know about dealer in Pune.

Here is the review of Digital Micrometer.It Contains Digital Interchangeable anvil Micrometer code 3562 Features & Specification.Know about dealer in Pune.

Here is the review of Micrometer.It contains Interchangeable anvil micrometer code 3262 with Features & specification. Know about dealer in Pune.

Here is the review of Digital Micrometer.It Contains Digital V anvil micrometer code 3590 with Features & Specifications. Know about dealer in Pune.

Here is the review fo V-Anvil Micrometer Code 3290,3290-153A,203A,353A with Unique Features & Technical Specifications.know about dealer in Pune.

Here is the review of Digital Micrometer. It Contains Digital Disk Break Micrometer Code 3588 with Features & Specifications. Know about dealer in Pune.

Here is the review of Disk Micrometer.It Contains Disk Break Micrometer code 3288 with Advance Feature & Specification. Know about dealer in Pune.

Here is the review of Digital Micrometer. It contains Digital Sheet Metal Micrometer code 3539 with Features & Specification.Know about dealer in Pune.

Here is the review of Micrometer. It Contains Sheet metal Micrometer code 3239 with Features & Technical Specification.know about dealer in Pune.

The review of Digital Micrometer.It Contains Digital cylindrical anvil tube micrometer code 3561 with Features & Specifications. Know about dealer in Pune.

Review of Cylindrical Tube Micrometer.It Contains Cylindrical anvil tube micrometer code 3261 with Feature & Specification.Know about dealer in Pune.

The review of Digital Micrometer.It Contains Digital Spherical anvil tube micrometer code 3560 with Features & Specification.Know about dealer in Pune.

Here is the review of Spherical tube.It contains Spherical anvil tube micrometer code 3260 with Unique Features & Specification.Know about dealer in Pune.

Here is the review of Digital Micrometer. It Contains digital crimp height micrometer code 3566 with Features & Specifications.Know about dealer in Pune.

Here is the review of Micrometer. It contains Crimp Height Micrometer Code 3266 with Features & Specification.Know about dealer In Pune.

Here is the review of Digital Micrometer.It Contains Digital Spline micrometer code 3533 with features & Specifications. Know about dealer in pune.

Here is the review of Micrometer.It contains Spline micrometer code 3233 with Unique Features & Specification.Know about dealer in Pune.

Here is the review of Digital Micrometer.It Contains Digital Point Micrometer code 3530 with Features & Specifications.Know about dealer in Pune.

Here is the review of Micrometer.It Contains Point Micrometer code 3230 with Features & Specification.Know about dealer in Pune.

Here is the reviews of Blade Micrometer. It Contains Blade Micrometer Code 3232 with Features & specifications. Know about dealer in Pune.

Here is the review Digital Micrometer. It Contains Digital Blade Micrometer Code 3532 with Features & Technical Specifications.Know about dealer in Pune.

Here is the review of Groove Micrometer. It Contains Groove Micrometer code-3287 with Features & Specifications. Know about dealer in Pune.

Here is the review of Micrometer.It contains Limit Micrometer code 3235 with Advance Features & Specifications.Know about dealer in Pune.

Here is the review of Indicating Micrometer. It Contains Indicating Micrometer code 3331 with Features & Specification.Know about dealer in Pune.

Here is the review Indicating Micrometer. It contains Indicating Micrometer code 3332 with Features & Specification. Know about dealer in Pune.

Here is the review of Indicating Micrometer. It Contains Indicating Micrometer code 3333 with Features & Specification.Know about dealer in Pune.